Re: Crashes when editing entries, posted by T. Ribbrock on Wed Jul 29 14:48:34 2009
|
By now, I've installed 2244 and ran some rudimentary tests. So far, I was not able to reproduce the crash anymore. Looking good!  |
|
Re: Time Display Format, posted by james Goedsir on Wed Sep 2 09:39:20 2009
|
| james Goedsir wrote: |
|
My Time field is displayed i a 12 Hour format I would like to change it to 24 Hours, can someone advised how it can be done
|
Sorted no problem |
|
Re: Elog stopped working, posted by Gillian Sabberton on Mon Sep 14 13:04:57 2009
|
| Gillian Sabberton wrote: |
|
| Stefan Ritt wrote: |
|
| Gillian Sabberton wrote: |
|
We have been running elog for a couple of years now and this morning it stopped working.
We have tried to rstart it and it says successful start but still does not run, when doing a restart it says stop failed start success.
Does anyone have any ideas.
thanks
|
You shoudl start elogd interactively in a DOS box to see if there is any error. Maybe disk full or a network problem...
|
It is running on a linux box, we have started in it in a telnet session, and no errors appear, as I am new to e-log is there an error log anywhere.
|
Have fixed this by removing the last added user from the Passwd file. |
|
Re: Elog stopped working, posted by Gillian Sabberton on Mon Sep 14 13:05:35 2009
|
| Gillian Sabberton wrote: |
|
| Stefan Ritt wrote: |
|
| Gillian Sabberton wrote: |
|
We have been running elog for a couple of years now and this morning it stopped working.
We have tried to rstart it and it says successful start but still does not run, when doing a restart it says stop failed start success.
Does anyone have any ideas.
thanks
|
You shoudl start elogd interactively in a DOS box to see if there is any error. Maybe disk full or a network problem...
|
It is running on a linux box, we have started in it in a telnet session, and no errors appear, as I am new to e-log is there an error log anywhere.
|
Have fixed this by removing the last added user from the Passwd file. |
|
Re: Attachments and images of attachments, posted by David Pilgram on Mon Nov 23 13:17:53 2009
|
> > Hi Stefan,
> >
> > I attached a 12 page (22kB) pdf file - no images - to an entry, but elog only converted the first 8 pages to
> > images (.png). This is reproducable, i.e. a different small multipage pdf file produced the same number of images.
> >
> > The size of the pdf file does not seem to be a problem, a single page pdf file with a lot of images in it
> > attached as expected.
> >
> > Is this correct, or a defined limitation?
>
> This is a defined limitation. Sometimes people attach whole books in PDF form to an entry, and you don't want to end up
> with hundreds of images cluttering your browser. If you want to see the full document, just load it into your PDF viewer.
Thanks, Stefan (why is this answer down under my name!?)
I couldn't find reference to this in the documentation. In the case I referred to, I'll have to play with the pdf so that
the six pages I actually want displayed are. |
|
Re: "Reply to" Author in this forum, posted by David Pilgram on Thu Nov 26 20:37:02 2009
|
> > Hi Stefan,
> >
> > This has happened twice on this forum now, starting from Mon 23rd November.
> >
> > Someone submits an entry (Me, 66625, Bertram Metz 66628)
> > I assume you post a reply (66626, 66629), but it shows up as if I or Bertram are the author of the reply, not
> > yourself. My reply to you (66627) was really authored by me, and I expressed puzzlement then at this point.
> >
> > Is this a bug, or some wierd affect of us forgetting to log out?
> >
> > Regards,
> >
> > David.
>
> Thanks for pointing out this issue. This bug was introduced recently, when I tried to avoid the
>
> Re: Re: Re: ...
>
> in the subject line. I changed this now completely so that we can have
>
> Preset on reply Author = $full_name
> Preset on first reply Subject = Re: $Subject
>
> which fixes both things. The modification is in revision 2271.
Thanks Stefan! |
|
Limit elog e-mail to only people involved with an entry, posted by Paul Paquette on Sat Mar 6 19:13:55 2010
|
Howdy and Thank you in advance.
Can I limit an elog entry mails to only go to my e-mail, my supervisor and the person who is entering the elog entry. I have the Elog server on Windows XP Pro running version 2.7.8.2282.
Thank you
Paul
|
|
Re: Invalid URL for groups beneath top groups in overview page, posted by Bertram Metz on Mon Mar 15 13:20:17 2010
|
| Stefan Ritt wrote: |
|
| Bertram Metz wrote: |
|
Hi,
I'm trying to implement top groups and started with the sample configuration shown in the 'Syntax of elogd.cfg' chapter of the documentation. But now I'm facing a problem with the links in the logbook selection page.
Here's my group configuration:
Group Linux PCs = Red Hat, Debian, Mandrake
Group Windows PCs = NT, XP
Top group engineering = Linux PCs, Windows PCs
Top group administration = Employees, Purchases
Show top groups = 1
The selection page for the top groups is displayed correctly, but the URL for the groups beneath the top group is incorrect. The URL for the Linux PCs group for instance is http://localhost:8080/engineering/engineering/ . The URLs for the logbooks within the Linux PCs groups is correct (e.g. http://localhost:8080/Debian/)
Has anybody an idea what's going wrong in y configuration?
Bertram
|
Thanks for reporting this bug. I fixed it in the intermediate release 278-4 which is ready for download.
|
Thanks for the quick bug fix.
Bertram |