While it is possible to print a logbook using the standard web browser print command in the Full or Summary view, a dedicated print function allowing the user to print out a hardcopy of a particular logbook would be very helpful.

Cheers

Adam

P.S. Thankyou for the response in elog:65671

Hi

I was just wondering if there was a way that the comments for a logbook could be set to be invisible on the Selection page but then displayed once a user has logged in to a particular logbook?

This is required for security purposes. I want a common login page which shows all logbooks, where the logbook names only have meaning for people who know them but then once logged in the comment provides additional information about that logbook.

Thanks

Adam

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

Hi

I have a logbook including the attributes: Author, Topic Date, Phase, Reference, Subject, Start Time, End Time, Duration

The Phase attribute has a number of MOptions including: Design, Manufacture, Testing, Results, Transport

I only want the attributes Start Time, End Time, and Duration to be shown if the Transport Phase is selected. I have tried using the conditional attributes

MOptions Phase = Design{1}, Manufacture{1}, Testing{1}, Results{1}, Transport{2}

and

{1} Show Attributes Edit = Author, Topic Date, Phase, Subject, Start Time, End Time, Duration
{2} Show Attributes Edit = Author, Topic Date, Phase, Subject

This works to show the attributes when the relevant Phase is selected but the Edit page shows the Phase options including the {1}/{2}. Is there are way that these conditionals are not displayed?

Also, I would like the "Duration" Atrribute to be a calculated value showing the time difference between Start Time and End Time. Is this possible?

Thanks,

Adam

Sorry about the multiple entries!!! -> browser problems

Hi All,

Perhaps a trivial question but some issues have arisen accessing my long-running elog with SSL enabled.  I suspect firewalls and browser updates are involved and I do not have the time or experience to diagnose and debug such a potential black-hole of difficulties.  Instead I am looking for a quick fix, and the first step - switching off sll - seems to work.  Now I would like to use redirect so that the elog is running under apache, however this is where I have stumbled; I have passwords so the plan is to eventually secure using apache.  Apache works fine and is running pages on ports 80 and 443, although I seem unable to redirect the elog (port 8080).  Following the instructions on the administrators guide I get:

Forbidden

You don't have permission to access /elog/ on this server.

The page is found at least so my redirect is doing something, and I suspect the solution is trivial, though I'm not too sure where to start.

-------------------

Also, what is  the best practice for updating one's elog version.  I originally installed using a tarball.