| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
69242
|
Tue Oct 20 18:40:05 2020 |
 | Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | ELOG V3.1.4-ba8 | Re: From command line: "command Submit not allowed" |
Giving up. Send me your config file and I will debug it.
Stefan
| David Wallis wrote: |
|
Hmmm... I added "New" to the Guest menu list, and the button showed up for a guest user. But when I submitted the new ticket, I got the message Error: Command "Submit" is not allowed for user ""
| Stefan Ritt wrote: |
|
"submit not allowed" you typically get if there is a "guest menu" for read-only access and you are not logged in. I never tried the elog program with PAM authentication, but you said that your turned authentication off. What I would do is to strip down your elogd.cfg to a very simple form until the elog utility works, then figure out which configuration makes the trouble.
Stefan
| David Wallis wrote: |
|
Update: I tried switching the logbook to no authentication reqiured, and still get the "command Submit not allowed" response.
| David Wallis wrote: |
|
I'm running Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not allowed.
I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.
This is the command line I'm using:
/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****' "This is a test message"
|
|
|
|
|
|
69241
|
Tue Oct 20 18:26:26 2020 |
| David Wallis | wallis@aps.anl.gov | Question | Linux | ELOG V3.1.4-ba8 | Re: From command line: "command Submit not allowed" |
Hmmm... I added "New" to the Guest menu list, and the button showed up for a guest user. But when I submitted the new ticket, I got the message Error: Command "Submit" is not allowed for user ""
| Stefan Ritt wrote: |
|
"submit not allowed" you typically get if there is a "guest menu" for read-only access and you are not logged in. I never tried the elog program with PAM authentication, but you said that your turned authentication off. What I would do is to strip down your elogd.cfg to a very simple form until the elog utility works, then figure out which configuration makes the trouble.
Stefan
| David Wallis wrote: |
|
Update: I tried switching the logbook to no authentication reqiured, and still get the "command Submit not allowed" response.
| David Wallis wrote: |
|
I'm running Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not allowed.
I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.
This is the command line I'm using:
/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****' "This is a test message"
|
|
|
|
|
69240
|
Tue Oct 20 18:02:42 2020 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | ELOG V3.1.4-ba8 | Re: From command line: "command Submit not allowed" |
"submit not allowed" you typically get if there is a "guest menu" for read-only access and you are not logged in. I never tried the elog program with PAM authentication, but you said that your turned authentication off. What I would do is to strip down your elogd.cfg to a very simple form until the elog utility works, then figure out which configuration makes the trouble.
Stefan
| David Wallis wrote: |
|
Update: I tried switching the logbook to no authentication reqiured, and still get the "command Submit not allowed" response.
| David Wallis wrote: |
|
I'm running Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not allowed.
I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.
This is the command line I'm using:
/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****' "This is a test message"
|
|
|
|
69239
|
Tue Oct 20 17:50:50 2020 |
| David Wallis | wallis@aps.anl.gov | Question | Linux | ELOG V3.1.4-ba8 | Re: From command line: "command Submit not allowed" |
Update: I tried switching the logbook to no authentication reqiured, and still get the "command Submit not allowed" response.
| David Wallis wrote: |
|
I'm running Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not allowed.
I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.
This is the command line I'm using:
/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****' "This is a test message"
|
|
|
69238
|
Tue Oct 20 16:05:40 2020 |
 | Bruno Schuler | bruno.schuler@empa.ch | Question | Windows | 3.1.4-2 | Upload attachment with py_elog |
Hello,
How can one add an attachment to a new or existing entry with py_elog?
E.g. if I want to upload an image.
Thanks for the help! |
|
69237
|
Tue Oct 20 15:08:17 2020 |
| David Wallis | wallis@aps.anl.gov | Question | Linux | ELOG V3.1.4-ba8 | From command line: "command Submit not allowed" |
I'm running Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not allowed.
I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.
This is the command line I'm using:
/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****' "This is a test message" |
|
69236
|
Tue Oct 20 08:24:20 2020 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Windows | latest | Re: Field values dependent on other selections |
Look in the manual under "conditional attributes"
Stefan
| Anthony Krishock wrote: |
|
All,
I would like to know if there is a way in elog to populate a field based on the value of another field. What I want to do is have a field with a few selections (a menu) and another text field that populates based on what I select from the menu.
Is this possible?
|
|
|
69235
|
Tue Oct 20 02:34:46 2020 |
 | Anthony Krishock | ajkrishock@verizon.net | Question | Windows | latest | Field values dependent on other selections |
All,
I would like to know if there is a way in elog to populate a field based on the value of another field. What I want to do is have a field with a few selections (a menu) and another text field that populates based on what I select from the menu.
Is this possible? |