Dear all, 

we have a running elog installation using SSL (with the self-signed certificate). Generally we use the web interface, but we have been asked if it was possible to automatically insert elog entries via command line. 

elog.exe should be the answer and so I gave it a try.

I was trying the following command line: 

elog.exe. -h server-ip-address -p 8080 -l demo -s -v -u username password -a "Mass=0" This is a test entry

Of course server-ip-address and username / password were proper fields. 

When I was doing this from the server itself, I got the following message:

Successfully connected to host server-ip-address, port 8080
Possibly invalid certificate, continue on your own risk!

and then the entry was inserted, but when I was typing the same from any other PC I got the error message:

Successfully connected to host server-ip-address, port 8080
elogd server does not run SSL protocol

The entry is of course not added and also the server (that is running in very verbose mode) reported a

SSL_accept failed

How can I fix it?  

Thanks for helping,

Antonio

Dear all,

I am trying to have the elog timestamp in UTC time instead of local time using the following config file but without success. Do you know what I am doing wrong?

Thanks

Luca

Theme = default
Comment = XENON1T LogBook 
Attributes = Subject, Author, Category, Type, Status
Locked Attributes = Author
Required Attributes = Category, Type
Preset Author = $long_name
Preset Submission = $utcdate
Options Category = General, CRY - Cryogenics, PUR - Purification, RSX- ReStoX, DST - Distillation Column, MUV - Muon Veto, TPC - Detector, WTR - Water Tank, RAD - Gas Purity, CAL - Calibration, SCT - Slow Control, SOP - Shiftoperation
Options Type = Software Installation, Hardware Installation, Failure/Problem, Configuration, Authorization, Other, Leak Check, xenon operation, Shared Resources, Log, Alarm Tests, Hardware test
Options Status = Info, Open - in progress, Closed - unsolved, Closed - solved, Other
Cell Style Status Info  = background-color:lightblue
Cell Style Status Closed - solved  = background-color:lightgreen
Cell Style Status Open - in progress  = background-color:yellow
Cell Style Status Closed - unsolved  = background-color:red
Extendable Options = Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type, Category

Hello, the following URL

https://foo.bar/elog/Shift+Reports/?new_user_name=a2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.com&new_full_name=a2seferewd%40fanneat.com&new_user_email=a2seferewd%40fanneat.com&newpwd=asdf&newpwd2=asdf&cmd=Save

causes elog 3.1.4 to crash. I attach full GDB trace

(gdb) set height 0
(gdb) set print elements 0
(gdb) set print frame-arguments all
(gdb) thread apply all backtrace

Thread 1 (Thread 0x7fc6d1624840 (LWP 1126)):
#0  0x00007fc6d06c6387 in raise () from /lib64/libc.so.6
#1  0x00007fc6d06c7a78 in abort () from /lib64/libc.so.6
#2  0x00007fc6d0708f67 in __libc_message () from /lib64/libc.so.6
#3  0x00007fc6d07a87a7 in __fortify_fail () from /lib64/libc.so.6
#4  0x00007fc6d07a6922 in __chk_fail () from /lib64/libc.so.6
#5  0x00007fc6d07a5e2b in _IO_str_chk_overflow () from /lib64/libc.so.6
#6  0x00007fc6d070d031 in __GI__IO_default_xsputn () from /lib64/libc.so.6
#7  0x00007fc6d06dd033 in vfprintf () from /lib64/libc.so.6
#8  0x00007fc6d07a5eb8 in __vsprintf_chk () from /lib64/libc.so.6
#9  0x00007fc6d07a5e0d in __sprintf_chk () from /lib64/libc.so.6
#10 0x0000000000423b5b in sprintf (__fmt=<optimized out>, __s=<optimized out>) at /usr/include/bits/stdio2.h:33
#11 get_user_line (lbs=<optimized out>, lbs@entry=0x2833748, 
    user=user@entry=0x7fffc84d0780 "a2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.combasar", password=password@entry=0x0, full_name=full_name@entry=0x0, email=email@entry=0x0, email_notify=email_notify@entry=0x0, 
    last_logout=last_logout@entry=0x0, inactive=inactive@entry=0x0) at src/elogd.c:25739
#12 0x0000000000433d0a in save_user_config (lbs=lbs@entry=0x2833748, 
    user=0x7704fc <_value+1500> "a2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.com", new_user=new_user@entry=1) at src/elogd.c:13343
#13 0x0000000000456068 in do_self_register (lbs=0x2833748, command=0x7fffc84d2650 "Save") at src/elogd.c:26768
#14 0x000000000045c1f7 in interprete (lbook=lbook@entry=0x7fffc84f92f0 "Shift Reports", path=path@entry=0x7fffc84d4430 "") at src/elogd.c:27594
#15 0x000000000045ecc6 in decode_get (logbook=logbook@entry=0x7fffc84f92f0 "Shift Reports", string=<optimized out>) at src/elogd.c:28393
#16 0x0000000000460970 in process_http_request (request=<optimized out>, 
    request@entry=0x284bee8 "GET /Shift+Reports/?new_user_name=a2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.com&new_full_name=a2seferewd%40fanneat.com&new_user_email=a2seferewd%40fanneat.com&newpwd=asdf&newpwd2=asdf&cmd=Save", i_conn=i_conn@entry=1) at src/elogd.c:29201
#17 0x00000000004623d2 in server_loop () at src/elogd.c:30212
#18 0x0000000000404209 in main (argc=8, argv=0x7fffc84fb6c8) at src/elogd.c:3123

Under 2.5.4-2 build1.460, when I edit the demo elogd.cfg the following happens:

- I start with
URL = http://cde-tx32-sds01.subdom.dom.com:8080/

- When I go to edit the global section of the config file, the *display* of
the string is changed to:
URL = <a
href="http://cde-tx32-sds01.subdom.dom.com:8080/">http://cde-tx32-sds01.subdom.dom.com:8080/</a>

- Saving this results in an error in that the rendered url is invalid.

Our current running version is 2.5.4-build1.413 and this behavior is not
evident.  I've looked through the diffs but could not identify the genesis
of this new behavior.

Thanks

Hi

Can I asign a URL to a Radio Button to bring up another program?

Hallo,

gibt es eine Möglichkeit das subdir auf ein Netzlaufwerk zu legen?

\\server\freigabe\...

Der Freigabepfad wird leider immer unter C:\... angelegt

Vielen Dank

BUG#1
Given:

Attributes = Category, Status, Started, Finished, Activity, Headline
Type Started = date
Type Finished = date
Options Status = 1-To Do{1}, 2-Opened{2}, 3-Closed{3}, 4-Suspended{4}
{2} Preset Started = $date
{3} Preset Finished = $date
{4} Preset Finished = $date

There seems to be no setting of Date format (or Time format?) that gives a
meaningful value to attributes Started or Finished.  Even "Date format = %s"
- which gives number of seconds since 1970 - gives bad results.

BUG#2
In single entry view, elog returns an unformatted date value for "Type =
date" attributes - even when it has been manually entered with the date picker.

 I haven't found anything in the forums about this. Apologies if its a duplicate.

I am fairly familiar with ELog, use it for multiple purposes on 5 different Virtual Servers at work. 

Currently looking to do some updates to one of the instances with the Date Type setting.

We have 17,000 entries all which have had manual entries for a Date Attribute for the last year and 8 months.

Due to regular entry errors on part of our contractors using it, (Eg: using "Aug" instead of "08", or using "-" instead of "/"), I want to change over to using the date type attribute (Type <attribute> = Date).

However the problem i found, the moment i save this in the config, and go to the list of entries, the date has changed on all of the entries to 12/31/1969. Which is BAD for our operation. So after removing the Type Date Setting the dates go back to normal.

Is there anyway to retain those dates so they display as they are and then only new entries would fall under the new date type setting?

Syntax manual didn't help much for this issue.