In the "find" command, when searching over all logbooks, it
would be nice to see ALL attributes, which are common for all
logbooks (e.g. typically the author name), not just
logbook name, date and text.

Ooops, I just realized that the Windows 2.2.3 distribution contained the old 
(2.2.2) executable for elogd.exe. I apologize for that. I have updated the 
elog223.exe distribution just now, so please download it again in order to 
get the new file.

- Stefan

Typing in a text for a new entry results in an error message, whenever
one forgets to fill in mandatory attributes (as it should happen !). However
after using the back button in this case (Using netscape 4.79) I made the
experience, that the text typed in gets lost. Other browsers like Mozilla
or IE do not have this problem. Any idea how this problem can be
avoided for netscape as well ?

> > Of course you have to stop the old elogd program and start the new one. 
Have 
> > you done that?
> 
> on windows i run it as a service through firedaemon, but i stop it before 
upgrading...that was one of the first things i checked...

Well, the other thing is that the previous page is till in the cache of 
Netscape. You have to hit "Reload" in order to properly update the page.

Besides these two things - browser cache and not stopping the old versoin - 
there is no possibility how you could see the old version at the bottom of 
the page, I update this very carefully on each distribution.

> Of course you have to stop the old elogd program and start the new one. Have 
> you done that?

on windows i run it as a service through firedaemon, but i stop it before upgrading...that was one of the first things i checked...

> this is happened before, and it just happened upgrading from 2.2.2 to 2.2.3
> 
> the link at the bottom of the page shows a previously installed version.
> 
> i don't install to the elog directory, i install to a ram disk and copy 
over the new executables, the source, readme and help html.
> 
> the link showed 2.1.2 until i upgraded to 2.2.2 (i didn't do anything 
different than the above. now i'm at 2.2.3 and the link is showing 
2.2.2...not that it's a big deal, i'm just wondering what i did wrong

Of course you have to stop the old elogd program and start the new one. Have 
you done that?

this is happened before, and it just happened upgrading from 2.2.2 to 2.2.3

the link at the bottom of the page shows a previously installed version.

i don't install to the elog directory, i install to a ram disk and copy over the new executables, the source, readme and help html.

the link showed 2.1.2 until i upgraded to 2.2.2 (i didn't do anything different than the above. now i'm at 2.2.3 and the link is showing 2.2.2...not that it's a big deal, i'm just wondering what i did wrong

> In my bottom.html file I have:
> 
> <A Href="host/Forum/?mode=summary&reverse=1&npp=10&Status=Open">Open</A> 
> <A Href="host/Forum/?mode=threaded&reverse=1&npp=10&Status=
> Open">(Threaded)</A> /                                                   
>   <A Href="host/Forum/?mode=summary&reverse=1&npp=10&Status=C
> losed">Closed</A> /  
> <A Href="host/Forum/?mode=summary&reverse=1&npp=10">All</A>
> <A Href="host/Forum/?mode=threaded&reverse=1&npp=10">(threaded)</A> 
> tickets.
> 
> This sort of implements some of the buttons you have in your whishlist.
> 
> This works, because it is the same for all users, now what I would like 
> is to add some sort of linke that will "show all entries from ME". I 
> could do this on a per user basis, but that's not what I want, Something 
> general with $user would be preferable.
> 
> Something like:
> 
> http://midas.psi.ch/elogdemo/Forum/?
mode=threaded&reverse=1&npp=8&Author=$user
> 
> Is this possible ?

I added this feature in version 2.2.3, so now you can click on

http://midas.psi.ch/elogdemo/Forum/?mode=threaded&reverse=1&npp=8&Author=$long_name

and see all your entries.