> > Anyone seen similar problems? 
> Probably not if you read the config file, 'cause I didn't. Shame on me...
> 
> But what this shows (Stefan: correct me if I'm wrong) is that if you set 
> the port number in the [global] section of the config file, the command-line
> option '-p' is ignored. FYI...
> 
> Joeri

I changed that behaviour, so from 2.0.5 on the command line port setting has 
precedence over the configuration file (as it should be).

> Is there a way to change the From address used when sending notifications 
> from ELOG?   I was hoping there might be another attribute that would go 
> along with the smtp host section.
> 
> Thanks,
> Eric

Yes there is an option

Use Email from = xxxx

see documentation.

Right now it is not possible to easily include pictures into the message body, but I put it on the wishlist. Of course you can always refer to external pictures if you submit your text as HTML and put the proper tags there like this one:

and you can even scale them like

but of course this requires to have that image stored somewhere else. I will probably add a feature like

att:name.gif

which will reference a picture from the attachment, and will be converted to the full picture name after submitting that message.

Version 2.0.5 of elog has been released today. Among various bugfixes, the 
display speed for threaded lists has been improved significantly. Display 
all messages of this forum and press the reload button to see the 
difference.

>     In the newest version of eLog, I was having trouble saving the 
> configurations once I change them through the web interface.  

I found a problem in the elogd.c code, which might cause that proplem 
sometimes. The fix is available from

http://midas.psi.ch/cgi-bin/cvsweb/elog/elogd.c

If you need a windows executable, please let me know.

> I can change 
> them and save them fine if I do it in notepad; but that way you have to 
> restart the elogd server.

That should not be necessary, since elogd reads in the configuration file at 
each access, so it can be modified externally without problem (although the 
internal configuration should be the preferred way...)

> Also I was wondering if you were going to add 
> any of the wish list items on version 2.0.6 (Conditional attributes seems 
> to have the most votes and would be an extremely helpful feature!! :-).  

I will have some spare time towards the end of August, so I hope to work on 
these requests next month.

> Hello,
>    If you have the text box turned off so you only enter attributes, is it 
> possible to have a couple of attributes that have small scroll through text 
> boxs of a couple of lines rather than just one line?   Like not as big as 
> the regular text box but something small to be able to post a couple of 
> lines in and if it gets bigger then you scroll down.  For instance if you 
> are posting a problem and a solution just have one small text box for the 
> problem and one for the solution.

Having multi-line attributes would be pretty difficult since it would break 
the way the database works (one attribute at a line). So for now, you have to 
use the text box and the reply functionality to deal with problems and fixes 
(like for this entry).

I implemented experimentally RSS feeds into Elog. Before releasing this new
addition, I would like to collect some experience with it. This forum now
supports RSS feeds, for which you can subscribe with a RSS feed reader like
Mozilla Firefox. Please give it a try and send me any feedback.

For an introduction to RSS feeds, please see 

http://www.webreference.com/authoring/languages/xml/rss/intro/

To subscribe to a logbook, enter following URL into your RSS reader:

http://<your-elog-host.domain>/<logbook>/elog.rdf

From the newest Mozilla Firefox browser, you can also click on the RSS box at
the lower right corner of the browser (see attachment).

>    If you have only one entry in the logbook and have it set up in threaded 
> mode like: ?cmd=Search&mode=threaded&reverse=1, when you click on the icon 
> of the entry or the number of the entry to see it, it does not allow you 
> to.  If there is more than one entry, it works fine.  

Ok, has been fixed. Will come in 2.0.5

>    Also I wanted to make a submit page from where you could either go back 
> to the logbook which you just entered a message for or type a new entry for 
> that logbook.  First of all, is there a way to have only one file called 
> submitpage.html in which I can define this for all logbooks or do i need it 
> for ever logbook.  And also, is there a way I can even set a link that will 
> allow to create a new entry.  I tried: 
>     <a href="demo/?cmd=new">Enter</a> another message<p>
> 
> but for some reason it does not work.  Is there a way to implement this?

The documentation was wrong about that which has been corrected. The proper 
file contents should be

<h1>You successfully submitted a message</h1>
<a href="?cmd=Back">Back</a> to the logbook<p>
<a href="?cmd=New">Enter</a> another message

This way one only needs one file for all logbooks.