I wanted to change some CKeditor settings so tried modifying elog/scripts/ckeditor to no avail.

I wiped elog/scripts/ and dropped a fresh download of CKeditor4, with only the basic extensions. But when I open the elog it still shows the full toolbar, with elog default style and with all extensions operational.

If I leave elog/scripts empty, I get "CKeditor NOT detected" when starting elogd and the HTML option is empty and shows nothing, all as expected.

Does anyone understand this? Is there some CKeditor configuration file elog is defering to that I've overlooked? I have tried system wide seaches just in case.

I have replied to this entry, because, for some reason I don't understand, if I reply to your latest entry, I am
automatically logged out.  I tried this multiple times, and also on many other entries and had no issues other than
entry 69787 - any reason for this, Stefan?

Anyway, what about MOptions? That appears to do what your example, and needs two lines in elog.cfg file:

Moptions WaferID = 1001, 1002, 1003, 1004, 1005
Extendable Options = WaferID

I've done a couple of quick tests on a test logbook I keep for such experimentation, and it appears to do all 
you have asked of it.  I added a new option 1006.  However, I found that one has to add that new one on its own, 
let the entry become proper, and then edit the entry to add the other, existing, values.   If you tick entries and 
also add a new one, then your new entry is all those listed on their own, that is you would get and new entry
in the config file such as "1002 | 1004 | 1006", rather than just 1006

This is probably an result of an unexpected use of Moptions and extendable options, rather than a bug per se.

> Hey, 
> 
> thanks for your answer. I completely get your point. However, I think my question as not precise enough.
> 
> I would like to have a numeric input, but many at the same time. When I make a new post, I would like to have an attribute 'wafer_IDs' that specifies the list of wafers this process has been performed with. So for a single post I would like to have a list like this:
> 
> wafer_IDs = numeric value, numeric value, numeric value, extendable
> 
> Note: I am not referring here to the option. The numeric values are freely chooses numbers, the only this that varies from post to post is the number of numeric values put.
> 
> Let me make an example (If the attribute were a string this would be the equivalent):
> 
> 1st post: A process that was run with 3 wafers (ID: 1000, ID: 1001 and ID: 1002):
> wafer IDs = 1000, 1001, 1002
> 
> 2nd post: A process that is run with 2 wafers (ID: 1000 and ID: 1002):
> wafer IDs = 1000, 1002
> 
> The string solves the issue, but is not as nice as having directly a list of integers.
> 
> Thanks for your help!
> 
> Best,
> 
> Nick

I get the following compiler warnings about sprintf() buffer overflows. I suggest sprintf() should be replaced by std::string msprintf() from 
midas. K.O.

iris00:~/packages> git clone https://bitbucket.org/ritt/elog --recursive
Cloning into 'elog'...
remote: Enumerating objects: 18297, done.
remote: Counting objects: 100% (18297/18297), done.
remote: Compressing objects: 100% (7710/7710), done.
remote: Total 18297 (delta 11462), reused 16637 (delta 10243), pack-reused 0 (from 0)
Receiving objects: 100% (18297/18297), 14.56 MiB | 17.14 MiB/s, done.
Resolving deltas: 100% (11462/11462), done.
Submodule 'mxml' (https://bitbucket.org/tmidas/mxml) registered for path 'mxml'
Cloning into '/home/iris/packages/elog/mxml'...
remote: Enumerating objects: 356, done.        
remote: Counting objects: 100% (356/356), done.        
remote: Compressing objects: 100% (242/242), done.        
remote: Total 356 (delta 162), reused 265 (delta 112), pack-reused 0 (from 0)        
Receiving objects: 100% (356/356), 85.65 KiB | 10.71 MiB/s, done.
Resolving deltas: 100% (162/162), done.
Submodule path 'mxml': checked out '4d4b4cf17bec323a76b8a87605efec6a4822bebf'
iris00:~/packages> cd elo
elog/      elog-2012/ 
iris00:~/packages> cd elog
iris00:~/packages/elog> make
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -c -o mxml.o mxml/mxml.cxx
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -w -c -o crypt.o 
src/crypt.cxx
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -c -o strlcpy.o 
mxml/strlcpy.cxx
type git &> /dev/null; if [ $? -eq 1 ]; then REV="unknown" ;else REV=`git log -n 1 --pretty=format:"%ad - %h"`; fi; echo \#define GIT_REVISION 
\"$REV\" > src/git-revision.h
git is /bin/git
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -o elog src/elog.cxx 
mxml.o crypt.o strlcpy.o -lssl
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -w -c -o auth.o 
src/auth.cxx
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -o elogd src/elogd.cxx 
auth.o mxml.o crypt.o strlcpy.o -lssl
src/elogd.cxx: In function ‘int el_submit(LOGBOOK*, int, BOOL, const char*, char (*)[1500], char (*)[1500], int, const char*, const char*, const 
char*, const char*, const char (*)[256], BOOL, const char*, const char*)’:
src/elogd.cxx:4960:47: warning: ‘%s’ directive writing up to 149999 bytes into a region of size between 100103 and 250102 [-Wformat-overflow=]
 4960 |       sprintf(message + strlen(message), "%s: %s\n", attr_name[i], attrib[i]);
      |                                               ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 4 and 300002 bytes into a destination of size 
250104
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx: In function ‘void show_edit_form(LOGBOOK*, int, BOOL, BOOL, BOOL, BOOL, BOOL, BOOL)’:
src/elogd.cxx:9659:28: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3993 [-Wformat-overflow=]
 9659 |       sprintf(str, "Preset %s", attr_list[index]);
      |                            ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 8 and 150007 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:9680:43: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3978 [-Wformat-overflow=]
 9680 |       sprintf(str, "Preset on first reply %s", attr_list[index]);
      |                                           ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 23 and 150022 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:9701:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9701 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 17 and 150016 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:9701:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9701 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 17 and 150016 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:9701:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9701 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 17 and 150016 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:9701:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9701 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 17 and 150016 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:9721:36: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3985 [-Wformat-overflow=]
 9721 |       sprintf(str, "Preset on edit %s", attr_list[index]);
      |                                    ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 16 and 150015 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:9741:41: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3980 [-Wformat-overflow=]
 9741 |       sprintf(str, "Preset on duplicate %s", attr_list[index]);
      |                                         ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 21 and 150020 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:9762:22: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3999 [-Wformat-overflow=]
 9762 |       sprintf(str, "p%s", attr_list[index]);
      |                      ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 2 and 150001 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:9780:31: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3993 [-Wformat-overflow=]
 9780 |          sprintf(str, "Preset %s", attr_list[index]);
      |                               ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 8 and 150007 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:9801:40: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9801 |          sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                        ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 17 and 150016 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:9821:44: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3980 [-Wformat-overflow=]
 9821 |          sprintf(str, "Preset on duplicate %s", attr_list[index]);
      |                                            ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 21 and 150020 bytes into a destination of size 
4000
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx: In function ‘void show_elog_list(LOGBOOK*, int, int, int, BOOL, char*)’:
src/elogd.cxx:20448:43: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1587 [-Wformat-overflow=]
20448 |                sprintf(str, "Icon comment %s", attrib[i]);
      |                                           ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 14 and 150013 bytes into a destination of size 
1600
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:20495:33: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1600 [-Wformat-overflow=]
20495 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                 ^~
src/elogd.cxx:20495:32: note: directive argument in the range [0, 99]
20495 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                ^~~~~~~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 3 and 150003 bytes into a destination of size 
1600
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:20459:33: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1600 [-Wformat-overflow=]
20459 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                 ^~
src/elogd.cxx:20459:32: note: directive argument in the range [0, 99]
20459 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                ^~~~~~~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 3 and 150003 bytes into a destination of size 
1600
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:21041:30: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1600 [-Wformat-overflow=]
21041 |                sprintf(str, "%s_%d", attr_list[i], j);
      |                              ^~
src/elogd.cxx:21041:29: note: directive argument in the range [0, 99]
21041 |                sprintf(str, "%s_%d", attr_list[i], j);
      |                             ^~~~~~~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 3 and 150003 bytes into a destination of size 
1600
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:21527:45: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1588 [-Wformat-overflow=]
21527 |                   sprintf(str, "Time format %s", attr_list[i]);
      |                                             ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 13 and 150012 bytes into a destination of size 
1600
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx:21512:45: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1588 [-Wformat-overflow=]
21512 |                   sprintf(str, "Date format %s", attr_list[i]);
      |                                             ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 13 and 150012 bytes into a destination of size 
1600
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
src/elogd.cxx: In function ‘void submit_elog(LOGBOOK*)’:
src/elogd.cxx:23282:38: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 2034 [-Wformat-overflow=]
23282 |          sprintf(str, "Subst on edit %s", attr_list[index]);
      |                                      ^~
In file included from /usr/include/stdio.h:894,
                 from src/elogd.h:42,
                 from src/elogd.cxx:38:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 15 and 150014 bytes into a destination of size 
2048
   38 |   return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
      |          ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   39 |                                   __glibc_objsize (__s), __fmt,
      |                                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   40 |                                   __va_arg_pack ());
      |                                   ~~~~~~~~~~~~~~~~~
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -o elconv src/elconv.cxx -
lssl
iris00:~/packages/elog> git log
commit 2eba8869bb72561f3f19f9b675ec74ba738f2443 (HEAD -> master, origin/master, origin/HEAD)
Author: Stefan Ritt <stefan.ritt@psi.ch>
Date:   Fri May 3 16:04:21 2024 +0200

    Removed unused variables

commit 8f942d1d18cc7d4d9b12f049dfd67284e3289963
Author: Stefan Ritt <stefan.ritt@psi.ch>
Date:   Fri May 3 15:50:17 2024 +0200

    Disabled attachment file retrieval to prevent poxy mis-use

commit 3020557a2b52cc9c460b80313c7c61c3ee014896
Author: Stefan Ritt <stefan.ritt@psi.ch>
Date:   Tue Apr 16 13:29:35 2024 +0200

    Fixed typos

commit 3876ffa2cc22a355cad8da642cb6f5a35884597a
Author: Stefan Ritt <stefan.ritt@psi.ch>
Date:   Mon Apr 15 18:04:52 2024 +0200

    Fixed line break

commit a644db7f2c14210e8014dc2a3dc9960e1382ccc1
Author: Stefan Ritt <stefan.ritt@psi.ch>
Date:   Mon Apr 15 18:00:54 2024 +0200

    Updated MacOSX command

commit fe60aaf0c41dcfafa50042e415f576faf82b1d4b
Author: Stefan Ritt <stefan.ritt@psi.ch>
Date:   Thu Mar 14 21:17:01 2024 +0100

    Fixed wrong number of attachments display

Broken pipe
iris00:~/packages/elog>