Type the title here

Type the text here

hehehehehe

- Set mark at current cursor position:

  Ctrl-Space

- Define opposite corner of rectangle:

  Move cursor to position

- Fill current rectangle with blanks:

  Ctrl-X,R,O  (open rectangle)

- Erase current rectangle:

  Ctrl-X,R,K  (kill rectangle)

- Copy current rectangle into internal buffer:

  Ctrl-X,R,R  (register rectangle)

- Paste (yank back) rectangle from internal buffer:

  Ctrl-X,R,Y  (yank rectangle)

hehehehehe

hehehehehe

lkl

Test comment

highikjhikohn

This is a test how well cut and paste would work by using gnuplot direct output

This is a sin function
This is a x2
This is a more complicated function

test2

hehehehehe

- create user/password file:

  htpasswd -c /etc/httpd/conf/users pibeta
  <passwd>

- configure Apache in access.conf:

#
# Restrict access to pibeta for "resstricted" directory
#

<Directory /home/pibeta/WWW/restricted>
AuthName "restricted"
AuthType Basic
AuthUserFile /etc/httpd/conf/users
require valid-user
</Directory>

- restart Apache

  killall -HUP httpd

Introduction

I care about having a good lab book because I don't like forgetting what was done. I'll therefore make a test entry :)

Notes as I'm doing stuff

To start I'll just run some experiment with settings here a screen shot of them and tyrying to paste it into the entry

Seems like this doesn't work.

Let's see if I can upload it if I save the image

That seems to work, but the image appears to be seperate from my text entry. Fair enough.

I'll now add a second image to this entry. That seems to work

! Note: at least two user entries in passwd file necessary !

Server
======

- authconfig: enable NIS, domain "fast", server "fast", use shadow, MD5

- /etc/rc.d/init.d/ypserv start
  /etc/rc.d/init.d/ypbind start

- /var/yp/Makefile:
  # shadow -> shadow #
  netgrp   -> # netgrp

- /var/yp/secureent:
  255.255.255.0 10.0.0.0

- /usr/lib/yp/ypinit -m

- Test: ypcat passwd
        ypwhich
        ypmatch stefan passwd

Client
======

- remove users from passwd/shadow

- [brsh] authconfig --enablenis --nisdomain fast --nisserver fast \
                    --useshadow --enablemd5 --kickstart

Update (after useradd)
======================

cd /var/yp; make

- obtain

  http://www.compsoc.net/~steve/portfw-2.2.html

- Install RPM:

  rpm -i ipmasqadm-0.4.2-3.i386.rpm

- Example fast/telnet -> node1/telnet

  modprobe ip_masq_portfw.o
  ipmasqadm portfw -f
  ipmasqadm portfw -a -P tcp -L 129.129.25.207 23 -R 10.0.0.1 23


hmmmm

/etc/conf.modules:

  alias eth0 eepro100
  options eepro100 options=0x30
                            
See parameters at http://www.scyld.com/network/eepro100.html

And for 3c59x (PSI stock):

  alias eth0 3c59x
  options eth0 options=20 full_duplex=1

see: http://www.scyld.com/network/vortex.html