Introduction

I care about having a good lab book because I don't like forgetting what was done. I'll therefore make a test entry :)

Notes as I'm doing stuff

To start I'll just run some experiment with settings here a screen shot of them and tyrying to paste it into the entry

Seems like this doesn't work.

Let's see if I can upload it if I save the image

That seems to work, but the image appears to be seperate from my text entry. Fair enough.

I'll now add a second image to this entry. That seems to work

! Note: at least two user entries in passwd file necessary !

Server
======

- authconfig: enable NIS, domain "fast", server "fast", use shadow, MD5

- /etc/rc.d/init.d/ypserv start
  /etc/rc.d/init.d/ypbind start

- /var/yp/Makefile:
  # shadow -> shadow #
  netgrp   -> # netgrp

- /var/yp/secureent:
  255.255.255.0 10.0.0.0

- /usr/lib/yp/ypinit -m

- Test: ypcat passwd
        ypwhich
        ypmatch stefan passwd

Client
======

- remove users from passwd/shadow

- [brsh] authconfig --enablenis --nisdomain fast --nisserver fast \
                    --useshadow --enablemd5 --kickstart

Update (after useradd)
======================

cd /var/yp; make

- obtain

  http://www.compsoc.net/~steve/portfw-2.2.html

- Install RPM:

  rpm -i ipmasqadm-0.4.2-3.i386.rpm

- Example fast/telnet -> node1/telnet

  modprobe ip_masq_portfw.o
  ipmasqadm portfw -f
  ipmasqadm portfw -a -P tcp -L 129.129.25.207 23 -R 10.0.0.1 23


hmmmm

/etc/conf.modules:

  alias eth0 eepro100
  options eepro100 options=0x30
                            
See parameters at http://www.scyld.com/network/eepro100.html

And for 3c59x (PSI stock):

  alias eth0 3c59x
  options eth0 options=20 full_duplex=1

see: http://www.scyld.com/network/vortex.html

> /etc/conf.modules:
> 
>   alias eth0 eepro100
>   options eepro100 options=0x30
>                             
> See parameters at http://www.scyld.com/network/eepro100.html
> 
> And for 3c59x (PSI stock):
> 
>   alias eth0 3c59x
>   options eth0 options=20 full_duplex=1
> 
> see: http://www.scyld.com/network/vortex.html

fgfgdfg

> > /etc/conf.modules:
> > 
> >   alias eth0 eepro100
> >   options eepro100 options=0x30
> >                             
> > See parameters at http://www.scyld.com/network/eepro100.html
> > 
> > And for 3c59x (PSI stock):
> > 
> >   alias eth0 3c59x
> >   options eth0 options=20 full_duplex=1
> > 
> > see: http://www.scyld.com/network/vortex.html
> 
> fgfgdfg

tester

something died so doing some ritual to revive it.

Mon Jul 7 10:46:29 2025 Mon Jul 7 10:46:29 2025

I tried hard and it worked

Hello,

welcome to this ELOG demonstration. It contains a logbook for Linux Tips & 
Tricks. You can use the arrow buttons on the top right corner to browse 
this logbook, use the "Find" link to search for certain entries in the 
logbook and the "New" link to enter a new entry. The write access is not 
password protected so everybody can submit entries, since this is just a 
demonstration. Each submission causes an automatic email notification to 
the author.

When submitting entries, attachments can be added just like with email 
programs. This entry for example contains a JPG attachment and a text 
attachment.

Stefan Ritt <stefan.ritt@psi.ch>

dghfgjghnvbnhnvbmv

To jest french

A to jest anchor

§paragraf

Obecny timestamp: Wed Feb 12 14:27:35 2025

uPLOAD: testfile.txt

Blablabla! Hhehehe!

<p>&gt; &gt; &gt; /etc/conf.modules: &gt; &gt; &gt; &gt; &gt; &gt; alias eth0 eepro100 &gt; &gt; &gt; options eepro100 options=0x30 &gt; &gt; &gt; &gt; &gt; &gt; See parameters at 
http://www.scyld.com/network/eepro100.html &gt; &gt; &gt; &gt; &gt; &gt; And for 3c59x (PSI stock): &gt; &gt; &gt; &gt; &gt; &gt; alias eth0 3c59x &gt; &gt; &gt; options eth0 options=20 full_duplex=1 &gt; 
&gt; &gt; &gt; &gt; &gt; see: http://www.scyld.com/network/vortex.html &gt; &gt; &gt; &gt; fgfgdfg &gt; &gt; tester</p>