Re: Installation with amp on Rocky Linux, posted by Stefan Ritt on Fri Mar 22 07:41:56 2024
|
Is there a way to install all dependencies automatically? Like if I install a package like "emacs" I get a list of dependencies with are automatically
installed:
Dependencies Resolved |
|
Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Sat Mar 23 23:51:37 2024
|
Normally it should work. Requirements are set in SPEC file.
$ rpm -qpi --requires elog-3.1.5-20240226.el7.x86_64.rpm
/bin/sh |
|
Re: Installation with amp on Rocky Linux, posted by scott on Mon Mar 25 10:18:55 2024
|
Is there an RPM available for Rocky 8 or Rocky 9?
And checking over https://elog.psi.ch/elog/download/RPMS/ , only el7 is found. Is that the right place to look for EL8 or EL9 based RPM? |
|
Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Mon Mar 25 10:55:43 2024
|
Hi,
The ELOG website provides new link to RPM packages :
Linux binaries are distributed as RPMs. |
|
Re: Installation with amp on Rocky Linux, posted by scott on Mon Mar 25 16:19:02 2024
|
Hi,
Thanks for the links to EL8/EL9. |
|
Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Mon Mar 25 16:44:03 2024
|
Yes, same build options are used.
But i can not'confirm that they are working as well as on EL7. The tests done by build script on CI/CD are quite simple and limited to
rpm installation, service start and access from cmdline to elog server. |
New elog version 3.1.5, posted by Stefan Ritt on Fri Feb 3 16:54:57 2023
|
A new version 3.1.5 of elog has been released with all accumulated fixes over the past actually few years. I made a tar file, a RPM, but I could not
compile yet a windows version.
https://elog.psi.ch/elog/download.html |
|
Re: New elog version 3.1.5, posted by Antonio Bulgheroni on Fri Feb 3 20:26:46 2023
|
Looking forward to the windows installer.
Thanks a lot and keep up the good work!
|