Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 175 of 807  Not logged in ELOG logo
 Find |  Login |  Help 
 Full | Summary | Threaded | Hide attachments  Show only new entries    6451 Entries 
Goto page Previous  1, 2, 3 ... 174, 175, 176 ... 805, 806, 807   Next  
ID Date Icondown Author Author Email Category OS ELOG Version Subject
  1941   Tue Sep 19 17:32:28 2006 Reply Stefan Rittstefan.ritt@psi.chQuestionAll2.6.2-1714Re: Re: Why are Preset fields blanked out?

Steve Jones wrote:

I think I found it. Try this:
Locked Attributes = ApprovedDate, CompletedDate
##################################################
# Define CRState
#
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date

In my config when I remove the two attributes from "LOCKED ATTRIBUTES" the fields do not get blanked out.


No, even with that it does not get blanked out. Attached is the complete elogd.cfg with which it works fine in my case (R1714). Can you try that?
Attachment 1: elogd.cfg 
[global]
port = 8080

[demo]
Comment = Test
Attributes = Author, CRState, ApprovedDate, CompletedDate
Locked Attributes = ApprovedDate, CompletedDate
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
  1942   Tue Sep 19 19:22:31 2006 Reply Steve Jonessteve.jones@freescale.comQuestionAll2.6.2-1714Re: Re: Why are Preset fields blanked out?

Stefan Ritt wrote:

Steve Jones wrote:

I think I found it. Try this:
Locked Attributes = ApprovedDate, CompletedDate
##################################################
# Define CRState
#
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date

In my config when I remove the two attributes from "LOCKED ATTRIBUTES" the fields do not get blanked out.


No, even with that it does not get blanked out. Attached is the complete elogd.cfg with which it works fine in my case (R1714). Can you try that?



Quote:

Stefan, when I try that config in a demo logbook in my installation *but with all other items in [global] I get the same field-blanking behavior. I am going to try going back to a completely pristine .cfg, but I suspect this will work fine. I will need to add back in configuration items until I run into the culprit.

Ok, I found it. Try this config:
[global]
port = 8080


[demo]
Comment = Test
Attributes = Author, CRState, ApprovedDate, CompletedDate
Locked Attributes = ApprovedDate, CompletedDate
Type CompletedDate = date
Type ApprovedDate = date

Format CompletedDate = 1
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
Setting the "Type" to "date" causes the blanking to occur.
  1943   Tue Sep 19 20:28:15 2006 Reply Stefan Rittstefan.ritt@psi.chQuestionAll2.6.2-1714Re: Re: Why are Preset fields blanked out?

Steve Jones wrote:

Setting the "Type" to "date" causes the blanking to occur.


Ok, then don't set the "Type" to "date" Wink
  1945   Tue Sep 19 20:38:49 2006 Reply Steve Jonessteve.jones@freescale.comQuestionAll2.6.2-1714Re: Re: Why are Preset fields blanked out?

Stefan Ritt wrote:

Steve Jones wrote:

Setting the "Type" to "date" causes the blanking to occur.


Ok, then don't set the "Type" to "date" Wink




Quote:

Yuk! Thanks!

Big grin
  1946   Fri Sep 22 07:42:57 2006 Reply Stefan Rittstefan.ritt@psi.chBug reportOther2.6.2-1714Re: Shell execution generating error

Steve Jones wrote:
When started as root *but not running as a daemon* shell execution results in the following errors that are sent to Standard Error:
Cannot restore original GID/UID.
Cannot remove pidfile "/var/run/cr-elogd.pid"
; Permission denied
Cannot restore original GID/UID.
Cannot remove pidfile "/var/run/cr-elogd.pid"
; Permission denied


The "/var/run/elogd.pid" file is created from elogd to indicate under which PID it is running. If you run elogd once under root, this file then belongs to root. If you afterwards run it under a user account, it cannot delete or change the file belonging to root. In that case, just delete that file manually.
  1947   Fri Sep 22 07:47:58 2006 Reply Stefan Rittstefan.ritt@psi.chBug reportOther2.6.2-1714Re: SVN1714 will not run in 'daemon" mode on Solaris8

Steve Jones wrote:
On Solaris, SVN1714 will not go into daemon mode. Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing. I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively". Both runs are as root, simply one with and one without the "-D"


The "one where it errors out" does not look like an error. It does the "fork()" at the end and the main thread ends, that's how it's supposed to be.
  1948   Fri Sep 22 07:50:39 2006 Reply Stefan Rittstefan.ritt@psi.chQuestionAll2.6.2-1714Re: "Supress Email Notification" checkbox

Steve Jones wrote:

Steve Jones wrote:
Is there a way to allow email notification but have the "Suppress Email Notification" checked by default? We had complaints about the enormous amount of email so I turned off email notification for edits/replys, but there are times that I would like to allow email to be sent out -- this would imply allowing email by unchecking the "Suppress" box.


What I think would be needed is:
Suppress Email on edit = 0|1|2
                             ^
Where a '2' denotes that the "Suppress Email Notification" shows up but *checked*


Just to a
Suppress default = 1
  1949   Fri Sep 22 07:54:58 2006 Reply Stefan Rittstefan.ritt@psi.chQuestionWindows2.6.2Re: new entry form - "minimalist" approach

frederic poncin wrote:
I'm playing with the configuration files in order to produce a "minimal" form.
At this time, I did not succeed in removing the following components:

- the "Fields marked with * are required" field


This is handled by
Required attributes = ...

so just remove this line completely if you don't need them.


frederic poncin wrote:

- the "Entry time:" field
- the "encoding ELCode / plain / HTML" field
- the "preview" button
- the duplication of the Submit/Preview/Back buttons on the top and the bottom of the page.


These fields are always present and cannot be turned off. If you are concerned about screen space (PDA\?), you can change the CSS file for smaller fonts etc.
Goto page Previous  1, 2, 3 ... 174, 175, 176 ... 805, 806, 807   Next  
ELOG V3.1.5-3fb85fa6