Hi Illam,

You can find it in src/elogd.h, #define TEXT_SIZE  250000, the original value 250000, you can change it to a larger one like #define TEXT_SIZE    1000000. Then recompile it again, just need typing "make". Elog Version is 3.1.3 in my site. HTH.

Cheers,

Xuan Wu

Hi,  any help will be appreciated on this.  I have not still figured this out.

Thanks.
Illam

Hi,

I'm getting the TEXTSIZE TOO BIG message every time I have more text in my entry.  I understand there is a way to increase the TEXTSIZE and re-compile.  Where can I find the TEXTSIZE parameter that I can increase and also how do I re-compile.

Appreciate your help.

Thanks.
Illam

Hi,

It's possible to build elogd under windows with cygwin, but not sure that is the best as it requires a lot of dependencies that should be included to dist package to be runnable everywhere.

After

• installation of dependencies (gcc-g++, make, libssl1.1, libssl-devel, opendlap-devel, libopenldap2, libkrb5-devel, libkrb5_3) using CygWin setup program,
• instalkation of git tool and clone the git repo (git clone https://bitbucket.org/ritt/elog --recursive),
• modification of Makefile to build with Kerberos/ldap/ssl support,

from cygwin bash under Windows 11, you can build elog :

/cygdrive/d/Devel/elog $ make
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -DHAVE_KRB5 -DHAVE_LDAP -o elog src/elog.cxx mxml.o crypt.o strlcpy.o -lssl -lkrb5 -lldap -llber
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -DHAVE_KRB5 -DHAVE_LDAP -w -c -o auth.o src/auth.cxx
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -DHAVE_KRB5 -DHAVE_LDAP -o elogd src/elogd.cxx auth.o mxml.o crypt.o strlcpy.o -lssl -lkrb5 -lldap -llber
src/elogd.cxx:217:6: warning: ‘_timezone’ redeclared without dllimport attribute: previous dllimport ignored [-Wattributes]
  217 | long _timezone;
      |      ^~~~~~~~~
src/elogd.cxx: In function ‘int el_submit(LOGBOOK*, int, BOOL, const char*, char (*)[1500], char (*)[1500], int, const char*, const char*, const char*, const char*, const char (*)[256], BOOL, const char*, const char*)’:
src/elogd.cxx:4963:47: warning: ‘%s’ directive writing up to 149999 bytes into a region of size between 100103 and 250102 [-Wformat-overflow=]
 4963 |       sprintf(message + strlen(message), "%s: %s\n", attr_name[i], attrib[i]);
      |                                               ^~
src/elogd.cxx:4963:14: note: ‘sprintf’ output between 4 and 300002 bytes into a destination of size 250104
 4963 |       sprintf(message + strlen(message), "%s: %s\n", attr_name[i], attrib[i]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx: In function ‘void show_edit_form(LOGBOOK*, int, BOOL, BOOL, BOOL, BOOL, BOOL, BOOL)’:
src/elogd.cxx:9655:28: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3993 [-Wformat-overflow=]
 9655 |       sprintf(str, "Preset %s", attr_list[index]);
      |                            ^~
src/elogd.cxx:9655:14: note: ‘sprintf’ output between 8 and 150007 bytes into a destination of size 4000
 9655 |       sprintf(str, "Preset %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9676:43: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3978 [-Wformat-overflow=]
 9676 |       sprintf(str, "Preset on first reply %s", attr_list[index]);
      |                                           ^~
src/elogd.cxx:9676:14: note: ‘sprintf’ output between 23 and 150022 bytes into a destination of size 4000
 9676 |       sprintf(str, "Preset on first reply %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9697:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
src/elogd.cxx:9697:14: note: ‘sprintf’ output between 17 and 150016 bytes into a destination of size 4000
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9697:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
src/elogd.cxx:9697:14: note: ‘sprintf’ output between 17 and 150016 bytes into a destination of size 4000
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9697:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
src/elogd.cxx:9697:14: note: ‘sprintf’ output between 17 and 150016 bytes into a destination of size 4000
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9697:37: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                     ^~
src/elogd.cxx:9697:14: note: ‘sprintf’ output between 17 and 150016 bytes into a destination of size 4000
 9697 |       sprintf(str, "Preset on reply %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9717:36: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3985 [-Wformat-overflow=]
 9717 |       sprintf(str, "Preset on edit %s", attr_list[index]);
      |                                    ^~
src/elogd.cxx:9717:14: note: ‘sprintf’ output between 16 and 150015 bytes into a destination of size 4000
 9717 |       sprintf(str, "Preset on edit %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9737:41: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3980 [-Wformat-overflow=]
 9737 |       sprintf(str, "Preset on duplicate %s", attr_list[index]);
      |                                         ^~
src/elogd.cxx:9737:14: note: ‘sprintf’ output between 21 and 150020 bytes into a destination of size 4000
 9737 |       sprintf(str, "Preset on duplicate %s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9758:22: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3999 [-Wformat-overflow=]
 9758 |       sprintf(str, "p%s", attr_list[index]);
      |                      ^~
src/elogd.cxx:9758:14: note: ‘sprintf’ output between 2 and 150001 bytes into a destination of size 4000
 9758 |       sprintf(str, "p%s", attr_list[index]);
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9776:31: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3993 [-Wformat-overflow=]
 9776 |          sprintf(str, "Preset %s", attr_list[index]);
      |                               ^~
src/elogd.cxx:9776:17: note: ‘sprintf’ output between 8 and 150007 bytes into a destination of size 4000
 9776 |          sprintf(str, "Preset %s", attr_list[index]);
      |          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9797:40: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3984 [-Wformat-overflow=]
 9797 |          sprintf(str, "Preset on reply %s", attr_list[index]);
      |                                        ^~
src/elogd.cxx:9797:17: note: ‘sprintf’ output between 17 and 150016 bytes into a destination of size 4000
 9797 |          sprintf(str, "Preset on reply %s", attr_list[index]);
      |          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:9817:44: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 3980 [-Wformat-overflow=]
 9817 |          sprintf(str, "Preset on duplicate %s", attr_list[index]);
      |                                            ^~
src/elogd.cxx:9817:17: note: ‘sprintf’ output between 21 and 150020 bytes into a destination of size 4000
 9817 |          sprintf(str, "Preset on duplicate %s", attr_list[index]);
      |          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx: In function ‘void show_elog_list(LOGBOOK*, int, int, int, BOOL, char*)’:
src/elogd.cxx:20459:43: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1587 [-Wformat-overflow=]
20459 |                sprintf(str, "Icon comment %s", attrib[i]);
      |                                           ^~
src/elogd.cxx:20459:23: note: ‘sprintf’ output between 14 and 150013 bytes into a destination of size 1600
20459 |                sprintf(str, "Icon comment %s", attrib[i]);
      |                ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:20506:33: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1600 [-Wformat-overflow=]
20506 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                 ^~
src/elogd.cxx:20506:32: note: directive argument in the range [0, 99]
20506 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                ^~~~~~~
src/elogd.cxx:20506:26: note: ‘sprintf’ output between 3 and 150003 bytes into a destination of size 1600
20506 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                   ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:20470:33: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1600 [-Wformat-overflow=]
20470 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                 ^~
src/elogd.cxx:20470:32: note: directive argument in the range [0, 99]
20470 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                                ^~~~~~~
src/elogd.cxx:20470:26: note: ‘sprintf’ output between 3 and 150003 bytes into a destination of size 1600
20470 |                   sprintf(str, "%s_%d", attr_list[i], j);
      |                   ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:21052:30: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1600 [-Wformat-overflow=]
21052 |                sprintf(str, "%s_%d", attr_list[i], j);
      |                              ^~
src/elogd.cxx:21052:29: note: directive argument in the range [0, 99]
21052 |                sprintf(str, "%s_%d", attr_list[i], j);
      |                             ^~~~~~~
src/elogd.cxx:21052:23: note: ‘sprintf’ output between 3 and 150003 bytes into a destination of size 1600
21052 |                sprintf(str, "%s_%d", attr_list[i], j);
      |                ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:21538:45: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1588 [-Wformat-overflow=]
21538 |                   sprintf(str, "Time format %s", attr_list[i]);
      |                                             ^~
src/elogd.cxx:21538:26: note: ‘sprintf’ output between 13 and 150012 bytes into a destination of size 1600
21538 |                   sprintf(str, "Time format %s", attr_list[i]);
      |                   ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:21523:45: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 1588 [-Wformat-overflow=]
21523 |                   sprintf(str, "Date format %s", attr_list[i]);
      |                                             ^~
src/elogd.cxx:21523:26: note: ‘sprintf’ output between 13 and 150012 bytes into a destination of size 1600
21523 |                   sprintf(str, "Date format %s", attr_list[i]);
      |                   ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx: In function ‘void submit_elog(LOGBOOK*)’:
src/elogd.cxx:23293:38: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 2034 [-Wformat-overflow=]
23293 |          sprintf(str, "Subst on edit %s", attr_list[index]);
      |                                      ^~
src/elogd.cxx:23293:17: note: ‘sprintf’ output between 15 and 150014 bytes into a destination of size 2048
23293 |          sprintf(str, "Subst on edit %s", attr_list[index]);
      |          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.cxx:23323:39: warning: ‘%s’ directive writing up to 149999 bytes into a region of size 2033 [-Wformat-overflow=]
23323 |          sprintf(str, "Subst on reply %s", attr_list[index]);
      |                                       ^~
src/elogd.cxx:23323:17: note: ‘sprintf’ output between 16 and 150015 bytes into a destination of size 2048
23323 |          sprintf(str, "Subst on reply %s", attr_list[index]);
      |          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c++ -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Wno-unused-result -Imxml -DHAVE_SSL -DHAVE_KRB5 -DHAVE_LDAP -o elconv src/elconv.cxx -lssl -lkrb5 -lldap -llber

Copy to new dir :

• the 3 binaries(elogd.exe, elog.exe & elconv.exe)
• logbooks, scripts, ssl and themes folders from git clone.
• elogd.cfg.example as elogd.cfg.

/cygdrive/d/Devel/elog/elog-win64 $ ldd elogd.exe
        ntdll.dll => /cygdrive/c/WINDOWS/SYSTEM32/ntdll.dll (0x7ff9796b0000)
        KERNEL32.DLL => /cygdrive/c/WINDOWS/System32/KERNEL32.DLL (0x7ff978050000)
        KERNELBASE.dll => /cygdrive/c/WINDOWS/System32/KERNELBASE.dll (0x7ff976af0000)
        cygwin1.dll => /usr/bin/cygwin1.dll (0x7ff925010000)
        cygkrb5-3.dll => /usr/bin/cygkrb5-3.dll (0x3fe4b0000)
        cygldap-2.dll => /usr/bin/cygldap-2.dll (0x3fdf70000)
        cyglber-2.dll => /usr/bin/cyglber-2.dll (0x3fe030000)
        cygssl-1.1.dll => /usr/bin/cygssl-1.1.dll (0x3ff4d0000)
        cygstdc++-6.dll => /usr/bin/cygstdc++-6.dll (0x3ff2f0000)
        cyggcc_s-seh-1.dll => /usr/bin/cyggcc_s-seh-1.dll (0x3ffc30000)
        cygk5crypto-3.dll => /usr/bin/cygk5crypto-3.dll (0x3fe600000)
        cygkrb5support-0.dll => /usr/bin/cygkrb5support-0.dll (0x3fe490000)
        cygintl-8.dll => /usr/bin/cygintl-8.dll (0x3ffa10000)
        cygcom_err-2.dll => /usr/bin/cygcom_err-2.dll (0x3fe9b0000)
        cygcrypto-1.1.dll => /usr/bin/cygcrypto-1.1.dll (0x3ffce0000)
        cygsasl2-3.dll => /usr/bin/cygsasl2-3.dll (0x3fdee0000)
        cygiconv-2.dll => /usr/bin/cygiconv-2.dll (0x3ffa30000)
        cygz.dll => /usr/bin/cygz.dll (0x3ff280000)

/cygdrive/d/Devel/elog/elog-win64 $ ls
elconv.exe  elog.exe  elogd.cfg  elogd.exe  logbooks  scripts  ssl  themes
 

/cygdrive/d/Devel/elog/elog-win64 $ ./elogd.exe
elogd 3.1.5 built Apr 12 2023, 00:01:15 revision 33884104
CKeditor detected
ImageMagick NOT detected. Image scaling will not work.
Indexing logbooks ... done
Server listening on port 8080 ...

With that, elogd starts and the site is usable.

NB: after installing imageMagick, elogd starts with activation of image manipulation features.

/cygdrive/d/Devel/elog/elog-win64 $ ./elogd.exe
elogd 3.1.5 built Apr 12 2023, 00:01:15 revision 33884104
CKeditor detected
ImageMagick detected
Indexing logbooks ... done
Server listening on port 8080 ...

For who as interested, I enclosed 2 zips, with (elog-win64_wDLL.zip) or without (elog-win64.zip) Cygwin DLL (licence: https://cygwin.com/COPYING). The build uses the current git version.

Regards,

Laurent