| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
1941
|
Tue Sep 19 17:32:28 2006 |
 | Stefan Ritt | stefan.ritt@psi.ch | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
| Steve Jones wrote: |
I think I found it. Try this:
Locked Attributes = ApprovedDate, CompletedDate
##################################################
# Define CRState
#
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
In my config when I remove the two attributes from "LOCKED ATTRIBUTES" the fields do not get blanked out.
|
No, even with that it does not get blanked out. Attached is the complete elogd.cfg with which it works fine in my case (R1714). Can you try that? |
|
1943
|
Tue Sep 19 20:28:15 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
| Steve Jones wrote: |
Setting the "Type" to "date" causes the blanking to occur.
|
Ok, then don't set the "Type" to "date"  |
|
1946
|
Fri Sep 22 07:42:57 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Other | 2.6.2-1714 | Re: Shell execution generating error |
| Steve Jones wrote: | When started as root *but not running as a daemon* shell execution results in the following errors that are sent to Standard Error:
Cannot restore original GID/UID.
Cannot remove pidfile "/var/run/cr-elogd.pid"
; Permission denied
Cannot restore original GID/UID.
Cannot remove pidfile "/var/run/cr-elogd.pid"
; Permission denied
|
The "/var/run/elogd.pid" file is created from elogd to indicate under which PID it is running. If you run elogd once under root, this file then belongs to root. If you afterwards run it under a user account, it cannot delete or change the file belonging to root. In that case, just delete that file manually. |
|
1947
|
Fri Sep 22 07:47:58 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Other | 2.6.2-1714 | Re: SVN1714 will not run in 'daemon" mode on Solaris8 |
| Steve Jones wrote: | | On Solaris, SVN1714 will not go into daemon mode. Running the compiled version under TRUSS (which provides a dump of every system call) and shows precisely where elog is failing. I have attached two TRUSS outputs: one where it errors out and the other where it runs but "interactively". Both runs are as root, simply one with and one without the "-D" |
The "one where it errors out" does not look like an error. It does the "fork()" at the end and the main thread ends, that's how it's supposed to be. |
|
1948
|
Fri Sep 22 07:50:39 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | All | 2.6.2-1714 | Re: "Supress Email Notification" checkbox |
| Steve Jones wrote: |
| Steve Jones wrote: | | Is there a way to allow email notification but have the "Suppress Email Notification" checked by default? We had complaints about the enormous amount of email so I turned off email notification for edits/replys, but there are times that I would like to allow email to be sent out -- this would imply allowing email by unchecking the "Suppress" box. |
What I think would be needed is:
Suppress Email on edit = 0|1|2
^
Where a '2' denotes that the "Suppress Email Notification" shows up but *checked* |
Just to a
Suppress default = 1 |
|
1949
|
Fri Sep 22 07:54:58 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Windows | 2.6.2 | Re: new entry form - "minimalist" approach |
| frederic poncin wrote: | I'm playing with the configuration files in order to produce a "minimal" form.
At this time, I did not succeed in removing the following components:
- the "Fields marked with * are required" field |
This is handled by
Required attributes = ...
so just remove this line completely if you don't need them.
| frederic poncin wrote: |
- the "Entry time:" field
- the "encoding ELCode / plain / HTML" field
- the "preview" button
- the duplication of the Submit/Preview/Back buttons on the top and the bottom of the page.
|
These fields are always present and cannot be turned off. If you are concerned about screen space (PDA\?), you can change the CSS file for smaller fonts etc. |
|
1950
|
Fri Sep 22 08:21:39 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | All | 2.6.2-1714 | Re: Top Text and Bottom Text only show "text" --- no files |
| Steve Jones wrote: | | Stefan, I found the source of the problem. When you moved some files to "logbook_dir" you also told the code to look in "logbook_dir" for top and bottom text files. The documentation indicates that the location dir should be "resource_dir". |
Yepp. I changed the documentation. Note that you can also specify an absolute path, like
/usr/local/elog/top.html
If the file name starts with a "/" (under Unix), the full path is taken instead of looking in the logbook directory. |
|
1951
|
Fri Sep 22 08:50:08 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Windows | 2.6.2-1699 | Re: Email substitution quit working |
| David Spindler wrote: |
| David Spindler wrote: | I have recently upgraded from the 2.6.0-beta (I believe) to 2.6.2-1699. I just found out that on the day I upgraded, email substitution has stopped working. I have checked the discussion area and all the documentation and do not see any clues. The debug_log.txt file shows that the emails are being processed, but the fields are not being substituted correctly.
Thanks, in advance for any help,
David
|
I have not been able to find anything wrong in my config file, so I replaced 2.6.2 with 2.6.1 (apparently that was what I was running last, not the 2.6.0-beta) and my troubles have disappeared.
Anybody have any idea what has happened? |
This problem has been fixed in revision 1712. So I made an 2.6.2-2 for the Windows community just now. Please upgrade. |