Re: Need to change port 25, posted by Andreas Luedeke on Tue Nov 27 08:19:11 2018
|
This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global
The following options are specific to the [global] section:
Port = <port>
Specifies the TCP port under which the server is listening. Default is 80. Can be superseeded via the '-p' command line flag.
| Yanick Vachon wrote: |
|
Hi,
We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?
Thanks
|
|
|
Re: Need to change port 25, posted by Stefan Ritt on Tue Nov 27 08:59:45 2018
|
I believe Yanick means the SMTP port, not the port under which elogd is listening. The SMPT port is hard wired to 25, because port 587 was not yet defiend when I wrote that code. I can make this a variable, but only if it works. So Yanick can you test if port 587 accepts normal SMTP commands? We don't have such a new server at our lab and I cannot test it. Under Windows you can open a command prompt and telnet to the mail server:
telnet <server> 587
HELO test
MAIL FROM: test
your server should then reply with "220 ..." and "250 ..." messages. Once this works, I will implement the variable SMTP port.
Stefan
| Andreas Luedeke wrote: |
|
This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global
The following options are specific to the [global] section:
Port = <port>
Specifies the TCP port under which the server is listening. Default is 80. Can be superseeded via the '-p' command line flag.
| Yanick Vachon wrote: |
|
Hi,
We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?
Thanks
|
|
|
Re: Need to change port 25, posted by Yanick Vachon on Tue Nov 27 15:21:31 2018 
|
I Stefan, it works with the 587 port.
| Stefan Ritt wrote: |
|
I believe Yanick means the SMTP port, not the port under which elogd is listening. The SMPT port is hard wired to 25, because port 587 was not yet defiend when I wrote that code. I can make this a variable, but only if it works. So Yanick can you test if port 587 accepts normal SMTP commands? We don't have such a new server at our lab and I cannot test it. Under Windows you can open a command prompt and telnet to the mail server:
telnet <server> 587
HELO test
MAIL FROM: test
your server should then reply with "220 ..." and "250 ..." messages. Once this works, I will implement the variable SMTP port.
Stefan
| Andreas Luedeke wrote: |
|
This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global
The following options are specific to the [global] section:
Port = <port>
Specifies the TCP port under which the server is listening. Default is 80. Can be superseeded via the '-p' command line flag.
| Yanick Vachon wrote: |
|
Hi,
We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?
Thanks
|
|
|
|
French Language, posted by Yanick Vachon on Tue Nov 27 20:06:17 2018
|
Hi,
When i set Language = French in global config it works in french until i logout, after i can't login anymore, even if i enter my user and password i always stay at the login window, the only way to login again is to edit the Elogd.cfg file in Elog directory, remove the Language = french and save then i can login in and work normally in english version.
Thanks. |
|
Re: French Language, posted by Stefan Ritt on Wed Nov 28 09:26:11 2018
|
I just tried myself with the current version 3.1.4 and it worked for me flawlessly. Maybe you want to upgrade.
Stefan
| Yanick Vachon wrote: |
|
Hi,
When i set Language = French in global config it works in french until i logout, after i can't login anymore, even if i enter my user and password i always stay at the login window, the only way to login again is to edit the Elogd.cfg file in Elog directory, remove the Language = french and save then i can login in and work normally in english version.
Thanks.
|
|
|
Re: Need to change port 25, posted by Stefan Ritt on Wed Nov 28 16:24:43 2018
|
Ok, so I added the option
STMP port = xxx
where you can specify 587 to override the default port 25. I committed the changes to bitbucket. Can you compile from sources, or do I have to dig out my dusty Windows PC?
Stefan
| Yanick Vachon wrote: |
|
I Stefan, it works with the 587 port.
|
|
|
Re: Need to change port 25, posted by Yanick Vachon on Wed Nov 28 16:43:14 2018
|
Hello,
now we kwow it's working are you gonne send us a version with the SMTP port editable?
Thanks!
| Yanick Vachon wrote: |
|
I Stefan, it works with the 587 port.
| Stefan Ritt wrote: |
|
I believe Yanick means the SMTP port, not the port under which elogd is listening. The SMPT port is hard wired to 25, because port 587 was not yet defiend when I wrote that code. I can make this a variable, but only if it works. So Yanick can you test if port 587 accepts normal SMTP commands? We don't have such a new server at our lab and I cannot test it. Under Windows you can open a command prompt and telnet to the mail server:
telnet <server> 587
HELO test
MAIL FROM: test
your server should then reply with "220 ..." and "250 ..." messages. Once this works, I will implement the variable SMTP port.
Stefan
| Andreas Luedeke wrote: |
|
This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global
The following options are specific to the [global] section:
Port = <port>
Specifies the TCP port under which the server is listening. Default is 80. Can be superseeded via the '-p' command line flag.
| Yanick Vachon wrote: |
|
Hi,
We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?
Thanks
|
|
|
|
|
|
Re: Need to change port 25, posted by Stefan Ritt on Wed Nov 28 16:53:58 2018
|
Just read my post 20 mins ago!
Stefan
| Yanick Vachon wrote: |
|
Hello,
now we kwow it's working are you gonne send us a version with the SMTP port editable?
Thanks!
| Yanick Vachon wrote: |
|
I Stefan, it works with the 587 port.
| Stefan Ritt wrote: |
|
I believe Yanick means the SMTP port, not the port under which elogd is listening. The SMPT port is hard wired to 25, because port 587 was not yet defiend when I wrote that code. I can make this a variable, but only if it works. So Yanick can you test if port 587 accepts normal SMTP commands? We don't have such a new server at our lab and I cannot test it. Under Windows you can open a command prompt and telnet to the mail server:
telnet <server> 587
HELO test
MAIL FROM: test
your server should then reply with "220 ..." and "250 ..." messages. Once this works, I will implement the variable SMTP port.
Stefan
| Andreas Luedeke wrote: |
|
This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global
The following options are specific to the [global] section:
Port = <port>
Specifies the TCP port under which the server is listening. Default is 80. Can be superseeded via the '-p' command line flag.
| Yanick Vachon wrote: |
|
Hi,
We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?
Thanks
|
|
|
|
|
|
|