Re: Reverse proxy of Elog using Docker and Nginx?, posted by Stefan Ritt on Tue Aug 14 06:04:53 2018
|
Have you tried the "URL = ..." statement? This determines you elog redirects if you log in. If you reach elog through a proxy, the URL is a
different one that if you access it directly. In your case the proxy URL might be necessary.
Stefan |
Re: Reverse proxy of Elog using Docker and Nginx?, posted by Andrew Wade on Fri Aug 17 22:07:41 2018
|
Yes, I tried setting the URL parameter to the url used by the proxy. It goes to the correct address but that landing is the login page.
Andrew
Stefan |
Re: Reverse proxy of Elog using Docker and Nginx?, posted by Stefan Ritt on Mon Aug 20 12:42:24 2018
|
Actually this forum works through an Apache reverse proxy with authentication and it works, so I suspect that the problem has to do with jwilder/nginx-proxy.
Since we don't have this here, all I can propose is that you do debugging yourself. Run elogd with the -v flag so that you see all requests coming
from the user through the proxy. Compare the requests through Apache and Nginx to see if any argumets are stripped or mangled. Upon successful login, elog |
Re: Reverse proxy of Elog using Docker and Nginx?, posted by Andrew Wade on Tue Aug 28 23:38:55 2018
|
It does indeed seem to be a cookie stripping issue. I just need to figure out how to get Nginx to forward these properly.
Thanks for the help.
Stefan |
Need to change port 25, posted by Yanick Vachon on Mon Nov 26 17:32:31 2018
|
Hi,
We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?
Thanks |
Re: Need to change port 25, posted by Andreas Luedeke on Tue Nov 27 08:19:11 2018
|
This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global
The following options are specific to the [global]
section:
Port = <port> |
Re: Need to change port 25, posted by Stefan Ritt on Tue Nov 27 08:59:45 2018
|
I believe Yanick means the SMTP port, not the port under which elogd is listening. The SMPT port is hard wired to 25, because port 587 was not yet defiend
when I wrote that code. I can make this a variable, but only if it works. So Yanick can you test if port 587 accepts normal SMTP commands? We don't
have such a new server at our lab and I cannot test it. Under Windows you can open a command prompt and telnet to the mail server: |
Re: Need to change port 25, posted by Yanick Vachon on Tue Nov 27 15:21:31 2018
|
I Stefan, it works with the 587 port.
|