Hi,

I am doing an inline image that is about 2.2 MB.  When I do a submit, I got the following message:

Error sending Email via <i>"<email server>"</i>: Entry size too large for email notification.

May I know what is the limit of the entry size and how do I change it?  Thank you.

Jacky

Hi,

I am doing an inline image that is about 2.2 MB.  When I do a submit, I got the following message:

Error sending Email via <i>"<email server>"</i>: Entry size too large for email notification.

May I know what is the limit of the entry size and how do I change it?  Thank you.

Jacky

Thanks

what is the format of the Date field in the csv file ?

My Date is date and not datetime. 

> I came accross the admin guide and I was reading / searching for a way to sync logbooks across sites...
> elogd mention "-m" and "-M" ... not elog but elogd... with that description :
> synchronize logbook(s) with remote server

If you would have followed the shown link to the "elogd.cfg syntax page", you would have found the chapter Mirroring:
https://midas.psi.ch/elog/config.html#mirroring

> Does it sync all logbooks ? 

Not necessarily, but that is the default.

> is there any examples somewhere or advice ?

See above: you'll find examples under #mirroring

> Thanks :)

You're welcome.

>  
> > Seriously, I really hope It could make it... Could you try it on your side ?
> 
> My personal opinion here is, that if you want others to investigate your problems, then the best way to do it is like that:
> - attach a minimal configuration that reproduces your problem (never attach a 100 line configuration, unless you've tested that the problem disappears
> regardless of which line you remove!);
> - attach the entry data, if the behaviour depends on the data;
> - use a specific, to the point subject line;
> - explain what you did, what happened and what you would have expected to happen;
> - ask kindly; and then
> - wait and hope for the best ;-)
> 
> (This is actually a very general procedure; I think it is applicable to all newsgroups, forums, etc.)
> 
> BTW: This tip was absolutely free of charge ;-)

Andreas,
Thanks for your comments. Thats why I posted in the first msg my configuration details... I just hope there can be a solution :)
I saw in the doc that an attribute cant be bigger than 100 char. but I couldn't figure the maximum size for options...  I'm wondering if the issue comes from the browser not refreshing correctly or if its elog..
Again, I tought that if that was from elog limitations, the attributes wouldn't load the options presets at all... but they do, (attribute volume) ... just not all the time :)

I understand that you are proactive on this forum and eventually I was thinking of contributing with detailed specific config examples but for now I just would like to get on track :) 
The last time I used Elog was 10 years ago :) it changed alot since :)

 
> Seriously, I really hope It could make it... Could you try it on your side ?

My personal opinion here is, that if you want others to investigate your problems, then the best way to do it is like that:
- attach a minimal configuration that reproduces your problem (never attach a 100 line configuration, unless you've tested that the problem disappears
regardless of which line you remove!);
- attach the entry data, if the behaviour depends on the data;
- use a specific, to the point subject line;
- explain what you did, what happened and what you would have expected to happen;
- ask kindly; and then
- wait and hope for the best ;-)

(This is actually a very general procedure; I think it is applicable to all newsgroups, forums, etc.)

BTW: This tip was absolutely free of charge ;-)