Re: Expanding column width when viewing in Summary mode, posted by Illam Pakkirisamy on Sat Jul 18 17:19:31 2020
|
Hi Stefan,
Thanks for your prompt follow up. I did try commenting of the width statement for listtitle2 and also reducing it to 40% but it did not
work. I restarted elogd daemon and I don't see the columns changing. I also tried putting a percentage number (40%) for listtitle1 just |
|
Re: Expanding column width when viewing in Summary mode, posted by David Pilgram on Sun Jul 19 13:14:36 2020
|
Anyone who knows me knows I (ab)use elog a lot. And this one is another of a long list of cheats and work arounds rather than modifying the
code properly.
In summary mode, the top row are titles, and if they are long, they will dominate the width of that column. Similarly if they are short, |
|
Re: Expanding column width when viewing in Summary mode, posted by Stefan Ritt on Mon Jul 20 08:37:17 2020
|
I can think of two reasons why you don't see a change:
1) You modified the wrong file. The elog.css file is under elog/themes/default/elog.css. If you "install" elog, it might go into your
installation directory. So check if you have more than one file with this name. |
|
Re: Expanding column width when viewing in Summary mode, posted by Illam Pakkirisamy on Thu Jul 23 21:19:24 2020
|
Hi Stefan,
I have only one elog.css file in the default directory and the installation path is the same one that I'm using. Basically, I'm using
off of the installed path. I also tried, modifying the file and calling it elog_mod.css and then specified CSS=<path>/elog_mod.css and started |
Search feature in ELOG, posted by Illam Pakkirisamy on Sun Aug 2 18:45:18 2020
|
Hi,
Is there a search feature in ELOG. Basically, we have the topics broken up by categories but within the categories we would like to search
by a key word based on the subject to get to a specific topic. |
|
Re: Search feature in ELOG, posted by Andreas Luedeke on Mon Aug 3 13:25:50 2020
|
That question screams: please read the manual! Find command: https://elog.psi.ch/elog/userguide.html#browse
Some simple examples:
https://elog.psi.ch/elogs/Forum/?mode=threaded&reverse=0&reverse=1&npp=20&Subject=Search
https://elog.psi.ch/elogs/Forum/?mode=summary&reverse=0&reverse=1&npp=8&Subject=category
Illam Pakkirisamy |
|
Re: Record ID corruption, posted by Stefan Ritt on Tue Aug 4 13:38:05 2020
|
I tried to reproduce the problem with a fresh minimal logbook (the demo one coming from the distribution). Made 60 replies and all went well. So I wonder
if it has to do with some special settings in elogd.cfg. Can you reproduce the problem with an empty logbook and an edlog.cfg which contains just the minimal
settings? |
do some changes on .CFG, posted by Lahreche Abdelmadjid on Mon Aug 17 10:34:32 2020 
|
Hi All,
I would like to have "Permis de verouillage et d'étiquetage 016685-68AF-0031" when I select it.
I don't found where can I make this change |