| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
2079
|
Wed Nov 15 19:33:17 2006 |
 | Stefan Ritt | stefan.ritt@psi.ch | Request | Linux | 2.6.1 | Re: add field type to automatically email CC |
| Arckonit wrote: | mmmm when i try your suggestion, it doesn't work :
error from the smtp server
Erreur lors de l'envoi d'un mél. via "172.20.0.2": Issue RCPT TO: command before DATA command |
You get this error if no valid receiver is specified. I tried your config file and it worked fine. You need however a recent version of elog (2.6.2-7). Probably you have to upgrade.
| Arckonit wrote: | you can remark the commented line
i would like to have one fixed list, so those users will be always alerted, and to be able to add and adress email in the notification attribute, but i really don't know how to do it
thx for any suggestions |
You can do that with
Preset Notification = someone@mail.com, someoneelse@mail.com
So Notification gets preset with a pre-defined list, which you can edit before submission. |
|
68800
|
Tue May 15 10:35:32 2018 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Question | Linux | 3.1.2 | Re: about shiftcheck | An attribute is similar to a variable. Do you know any programming language that allows to start a variable with a digit? I don't.
The solution is very obvious: start your attributes with a letter.
Cheers, Andreas
| Xuan Wu wrote: |
|
Hi all,
I try to implement a shift check list for our facility. The attributes called "a1, a2, b1, b2 etc" are used in original shiftcheck.html， However, we would like to use "1.1, 1.2, 2.1, 2.2 etc". So I try to change the name of checkbox in shiftcheck.html and the attributes in elogd.cfg file to "1.1, 1.2, 2.1, 2.2 etc". The elog web page can display the attributes like "1.1, 1.2...", but the checked value of "on" seems not working. And I have used wirshark to monitor the http package, the request message seems correct, but the service response seems can't deal with attributes like "1.1, 1.2...", so is there a way to work around?
|
|
|
68801
|
Wed May 16 02:20:24 2018 |
| Xuan Wu | wux@ihep.ac.cn | Question | Linux | 3.1.2 | Re: about shiftcheck | That's true. Thanks for your explanation.
Cheers, Xuan
| Andreas Luedeke wrote: |
|
An attribute is similar to a variable. Do you know any programming language that allows to start a variable with a digit? I don't.
The solution is very obvious: start your attributes with a letter.
Cheers, Andreas
| Xuan Wu wrote: |
|
Hi all,
I try to implement a shift check list for our facility. The attributes called "a1, a2, b1, b2 etc" are used in original shiftcheck.html， However, we would like to use "1.1, 1.2, 2.1, 2.2 etc". So I try to change the name of checkbox in shiftcheck.html and the attributes in elogd.cfg file to "1.1, 1.2, 2.1, 2.2 etc". The elog web page can display the attributes like "1.1, 1.2...", but the checked value of "on" seems not working. And I have used wirshark to monitor the http package, the request message seems correct, but the service response seems can't deal with attributes like "1.1, 1.2...", so is there a way to work around?
|
|
|
|
67
|
Thu Jul 11 10:36:09 2002 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug fix | | | Re: a bug and a question | > If you have only one entry in the logbook and have it set up in threaded
> mode like: ?cmd=Search&mode=threaded&reverse=1, when you click on the icon
> of the entry or the number of the entry to see it, it does not allow you
> to. If there is more than one entry, it works fine.
Ok, has been fixed. Will come in 2.0.5
> Also I wanted to make a submit page from where you could either go back
> to the logbook which you just entered a message for or type a new entry for
> that logbook. First of all, is there a way to have only one file called
> submitpage.html in which I can define this for all logbooks or do i need it
> for ever logbook. And also, is there a way I can even set a link that will
> allow to create a new entry. I tried:
> <a href="demo/?cmd=new">Enter</a> another message<p>
>
> but for some reason it does not work. Is there a way to implement this?
The documentation was wrong about that which has been corrected. The proper
file contents should be
<h1>You successfully submitted a message</h1>
<a href="?cmd=Back">Back</a> to the logbook<p>
<a href="?cmd=New">Enter</a> another message
This way one only needs one file for all logbooks. |
|
67
|
Thu Jul 11 10:36:09 2002 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug fix | | | Re: a bug and a question | > If you have only one entry in the logbook and have it set up in threaded
> mode like: ?cmd=Search&mode=threaded&reverse=1, when you click on the icon
> of the entry or the number of the entry to see it, it does not allow you
> to. If there is more than one entry, it works fine.
Ok, has been fixed. Will come in 2.0.5
> Also I wanted to make a submit page from where you could either go back
> to the logbook which you just entered a message for or type a new entry for
> that logbook. First of all, is there a way to have only one file called
> submitpage.html in which I can define this for all logbooks or do i need it
> for ever logbook. And also, is there a way I can even set a link that will
> allow to create a new entry. I tried:
> <a href="demo/?cmd=new">Enter</a> another message<p>
>
> but for some reason it does not work. Is there a way to implement this?
The documentation was wrong about that which has been corrected. The proper
file contents should be
<h1>You successfully submitted a message</h1>
<a href="?cmd=Back">Back</a> to the logbook<p>
<a href="?cmd=New">Enter</a> another message
This way one only needs one file for all logbooks. |
|
67
|
Thu Jul 11 10:36:09 2002 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug fix | | | Re: a bug and a question | > If you have only one entry in the logbook and have it set up in threaded
> mode like: ?cmd=Search&mode=threaded&reverse=1, when you click on the icon
> of the entry or the number of the entry to see it, it does not allow you
> to. If there is more than one entry, it works fine.
Ok, has been fixed. Will come in 2.0.5
> Also I wanted to make a submit page from where you could either go back
> to the logbook which you just entered a message for or type a new entry for
> that logbook. First of all, is there a way to have only one file called
> submitpage.html in which I can define this for all logbooks or do i need it
> for ever logbook. And also, is there a way I can even set a link that will
> allow to create a new entry. I tried:
> <a href="demo/?cmd=new">Enter</a> another message<p>
>
> but for some reason it does not work. Is there a way to implement this?
The documentation was wrong about that which has been corrected. The proper
file contents should be
<h1>You successfully submitted a message</h1>
<a href="?cmd=Back">Back</a> to the logbook<p>
<a href="?cmd=New">Enter</a> another message
This way one only needs one file for all logbooks. |
|
67
|
Thu Jul 11 10:36:09 2002 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug fix | | | Re: a bug and a question | > If you have only one entry in the logbook and have it set up in threaded
> mode like: ?cmd=Search&mode=threaded&reverse=1, when you click on the icon
> of the entry or the number of the entry to see it, it does not allow you
> to. If there is more than one entry, it works fine.
Ok, has been fixed. Will come in 2.0.5
> Also I wanted to make a submit page from where you could either go back
> to the logbook which you just entered a message for or type a new entry for
> that logbook. First of all, is there a way to have only one file called
> submitpage.html in which I can define this for all logbooks or do i need it
> for ever logbook. And also, is there a way I can even set a link that will
> allow to create a new entry. I tried:
> <a href="demo/?cmd=new">Enter</a> another message<p>
>
> but for some reason it does not work. Is there a way to implement this?
The documentation was wrong about that which has been corrected. The proper
file contents should be
<h1>You successfully submitted a message</h1>
<a href="?cmd=Back">Back</a> to the logbook<p>
<a href="?cmd=New">Enter</a> another message
This way one only needs one file for all logbooks. |
|
67
|
Thu Jul 11 10:36:09 2002 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug fix | | | Re: a bug and a question | > If you have only one entry in the logbook and have it set up in threaded
> mode like: ?cmd=Search&mode=threaded&reverse=1, when you click on the icon
> of the entry or the number of the entry to see it, it does not allow you
> to. If there is more than one entry, it works fine.
Ok, has been fixed. Will come in 2.0.5
> Also I wanted to make a submit page from where you could either go back
> to the logbook which you just entered a message for or type a new entry for
> that logbook. First of all, is there a way to have only one file called
> submitpage.html in which I can define this for all logbooks or do i need it
> for ever logbook. And also, is there a way I can even set a link that will
> allow to create a new entry. I tried:
> <a href="demo/?cmd=new">Enter</a> another message<p>
>
> but for some reason it does not work. Is there a way to implement this?
The documentation was wrong about that which has been corrected. The proper
file contents should be
<h1>You successfully submitted a message</h1>
<a href="?cmd=Back">Back</a> to the logbook<p>
<a href="?cmd=New">Enter</a> another message
This way one only needs one file for all logbooks. |
|