Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 2 of 801  Not logged in ELOG logo
ID Date Icon Author Author Email Category OS ELOG Versiondown Subject
  68886   Fri Feb 8 14:43:13 2019 Question Patrick Sizunsizun@cea.frBug reportLinuxv3.1.1Images in notifications

Hello,

I am using Elog v3.1.1. When entries contain embedded images, these images are attached to the email notifications but are not properly displayed in the body of the email.
Is it expected?
For example, with an image file myimage.png the email source code contains <img alt="" height="150" src="190208_143305/myimage.png.png" width="200">
Maybe the email should make use of the Content-ID of the attached image?

  68887   Fri Feb 8 14:57:05 2019 Reply Stefan Rittstefan.ritt@psi.chBug reportLinuxv3.1.1Re: Images in notifications

Your observation is correct. The mailer inside elog should scan all email bodies and replace all <img> tags correctly. I put that on my todo list.

Stefan

Patrick Sizun wrote:

Hello,

I am using Elog v3.1.1. When entries contain embedded images, these images are attached to the email notifications but are not properly displayed in the body of the email.
Is it expected?
For example, with an image file myimage.png the email source code contains <img alt="" height="150" src="190208_143305/myimage.png.png" width="200">
Maybe the email should make use of the Content-ID of the attached image?

 

  66467   Tue Jul 28 02:50:42 2009 Question Dan DuongDan.Duong@team.telstra.comQuestionWindowsv2.7.42111display GMT time instead of local time in Entry time/ Last edit field

Hi all,

I have set my PC in Time Zone GMT+10:00 but I get GMT time in Entry time/Last edit field.

I have installed in another PC. Which has Time Zone GMT+10:00 but I still get GMT time in Entry time/Last edit field.

Please help. Thank you very much.

 

  66469   Tue Jul 28 11:04:01 2009 Reply Stefan Rittstefan.ritt@psi.chQuestionWindowsv2.7.42111Re: display GMT time instead of local time in Entry time/ Last edit field

Dan Duong wrote:

Hi all,

I have set my PC in Time Zone GMT+10:00 but I get GMT time in Entry time/Last edit field.

I have installed in another PC. Which has Time Zone GMT+10:00 but I still get GMT time in Entry time/Last edit field.

Please help. Thank you very much.

 

That's strange. I use the C function localtime() to obtain the local time from Windows. The documentation says that this function checks the Windows control panel  and returns the proper local time. So far, nobody complained so I guess only you have this problem (anybody else to correct me???). The only hint I found is to set the environment variable TZ. So open a DOS box and enter

set TZ=AST+10

then start elogd.exe interactively in that dos box and see if you get something else.

  66476   Wed Jul 29 04:56:27 2009 Reply Dan DuongDan.Duong@team.telstra.comQuestionWindowsv2.7.42111Re: display GMT time instead of local time in Entry time/ Last edit field

Stefan Ritt wrote:

Dan Duong wrote:

Hi all,

I have set my PC in Time Zone GMT+10:00 but I get GMT time in Entry time/Last edit field.

I have installed in another PC. Which has Time Zone GMT+10:00 but I still get GMT time in Entry time/Last edit field.

Please help. Thank you very much.

 

That's strange. I use the C function localtime() to obtain the local time from Windows. The documentation says that this function checks the Windows control panel  and returns the proper local time. So far, nobody complained so I guess only you have this problem (anybody else to correct me???). The only hint I found is to set the environment variable TZ. So open a DOS box and enter

set TZ=AST+10

then start elogd.exe interactively in that dos box and see if you get something else.

 I did as instructed but time was 20 hours behide

I have entered    set TZ=AST-10   I got the correct time. I think my elog files have been changed by someone. elogd file is running in DOS box now. Please help how to run elog as normal or correct elog files. Which file I should check. Is it elconv.c file? Thank you Stefan.

  66477   Wed Jul 29 09:21:39 2009 Reply Stefan Rittstefan.ritt@psi.chQuestionWindowsv2.7.42111Re: display GMT time instead of local time in Entry time/ Last edit field

Dan Duong wrote:

 I did as instructed but time was 20 hours behide

I have entered    set TZ=AST-10   I got the correct time. I think my elog files have been changed by someone. elogd file is running in DOS box now. Please help how to run elog as normal or correct elog files. Which file I should check. Is it elconv.c file? Thank you Stefan.

You have to change your environment variable "TZ" system wide.  You do that by going to 

My Computer/Properties/Advanced/Environment Variables/New

then you enter TZ as the variable name and AST-10 as the value. You might have to reboot your computer.

  66487   Mon Aug 3 03:26:23 2009 Reply Dan DuongDan.Duong@team.telstra.comQuestionWindowsv2.7.42111Re: display GMT time instead of local time in Entry time/ Last edit field

Stefan Ritt wrote:

Dan Duong wrote:

 I did as instructed but time was 20 hours behind.

I have entered    set TZ=AST-10   I got the correct time. I think my elog files have been changed by someone. elogd file is running in DOS box now. Please help how to run elog as normal or correct elog files. Which file I should check. Is it elconv.c file? Thank you Stefan.

You have to change your environment variable "TZ" system wide.  You do that by going to 

My Computer/Properties/Advanced/Environment Variables/New

then you enter TZ as the variable name and AST-10 as the value. You might have to reboot your computer.

 It is working with the correct time stamp now. Thanks you very much Stefan.

  869   Sat Jan 8 17:31:07 2005 Warning Neil Swartzjunkswartz@optonline.netBug reportAllv2.5.5-4MOptions and Extendable
If an attribute uses MOptions and is also extendable, clicking "Add 
<attribute name>" and entering a value adds the value to the MOptions, but 
does not put the value into the log entry. The log record has that 
attribute blank.
You have to go back into the record and edit it to put the new value in.
ELOG V3.1.5-3fb85fa6