Dear colleagues,
Can someone compile an up-to-date windows-version or write a manual how to do it in Windows without compiling errors?
Thank you.

 I am also experiencing the same exact problem as explained above. It only seems to happen when a part of the title has changed. I will include my config for an example. Make a few entries, then change the "Customer" paramater. Then try and edit an entry in the thread.

 Enable attachments = 1

Attributes = Employee, Customer, XXX-ID, XXXX Number, SCD, Type, Status, Folder Created, XXXX Received, Equipment Installed, XXX Carrier Up, Customer Carrier Up, QA Completed

Thread display = $Customer  -  $SLR-ID  -  $Type  -  $Status  -  SCD: $SCD  - XXXX: $XXXX Number

Propagate attributes = Status

Locked Attributes = Employee
Options Type = Activation, Termination, Change
Options Folder Created = Yes, No, N/A
Options XXXX Received = Yes, No, N/A
Options Equipment Installed = Yes, No, N/A
Options XXX Carrier Up = Yes, No, N/A
Options Customer Carrier Up = Yes, No, N/A
Options QA Completed = Yes, No

Entries per page = 100

Preset Text = $short_name @ $utcdate -
Append on reply = $short_name @ $utcdate -

Locked Attributes = Employee

Preset Employee = $long_name

Options Status = Open, Closed

Quick Filter = Status, Type

Type SCD = datetime

Summary lines = 0
Enable Attachments = 0
Suppress default = 2
Entries per page = 10

Suppress Email to users = 1

Display mode = threaded
Collapse to last = 1
Expand default = 0
Subst on reply Employee = $long_name 

Faulting application elogd.exe, version 0.0.0.0, faulting module elogd.exe, version 0.0.0.0, fault address 0x000646c7.

I have two identical servers (IBM X337) setup on the same LAN with Ubuntu Linux 10.04 LTS with ELOGD running (Compiled from tarbell) with the same exact package install base. (Only difference between the two servers is the hostname, and the ELOGD.CFG global section)

I am attempting to setup an ECR (Engineering Change Review/Request) process in ELOG.

I have a logbook setup so that an original request is submitted with a status of "Approval Pending"

Options ECR Status = Approval Pending, Approved / In Progress, Completed / In QA, Closed

Once the entry is made, it is reviewed by several people who reply to the original entry and update the approval fields, adding any comments as a reply :

Options OPS Approval = Approved, Denied
Options ENG Approval = Approved, Denied
Options Director Approval = Approved, Denied

Once the final approval is obtained, they reply to the thread and update the ECR Status field to "Approved / In Progress"

This goes through our QA process, and is finaly updated with "Closed"

The problem is, I would like to keep the historical data of when the status of these entries are made. For example, in the message thread, I can see that reply #4 changed the "Status" field to "Approved". However, I can not seem to find a way for this to work with quick filtering. The quick filter always filters on the first entry on a thread, and not the last.

The other option would be to change the status of the first entry, but that seems silly as I am using replys instead of edits.

Any ideas on how to implement this "Status" field into my workflow? I am even open to losing the historical "status" and beeing able to change all entries on the thread on reply. (i.e. Reply #4 changes "Status" to "Approved", and the system changed all entries in the thread to "Approved")

Hello Stefan,

I can not find 2.7.8-5 tar file. Could you please point where it is?

Thanks,

Ruslan.

 Thanks a lot Stefan.

The problem is still there in 2.7.8-5. The following line 'Cell Style Status Done = background-color:green' does not do anything whereas 'Style Status Done = background-color:green' highlights the whole row. Is that fixed?

Thanks,

Ruslan.