Re: Different timezone settings for each elog, posted by gary holman on Thu Jun 11 01:32:26 2015
|
Okay, I missed the obvious...
sudo -u central-tz-user (start elog)
gary |
|
Re: Drag-and-drop not working in elog 3.1.0, posted by Andreas Luedeke on Thu Jun 11 08:48:21 2015
|
Dear David,
what I meant with a "fresh and clean installation" is, that you do not install elog on the production system over
the existing elog, but instead on another Linux box.
One possible problem could be that you have a modified CSS (or some other file), which
is not overwritten by the ELOG installation. That file could break the D & D functionality.
My advise would be, to do an ELOG test installation |
|
Re: Drag-and-drop not working in elog 3.1.0, posted by Stefan Ritt on Thu Jun 11 09:09:03 2015
|
Sure, I just wanted to get feedback from you regarding the draft functionality. As it looks now people are happy, so I will do a 3.1.1.
Andreas
Luedeke wrote:
PS: Stefan, V3.1.0-2411f95 is from April |
|
Re: Upload of images fails from mobile platforms when using ELOG under SSL, posted by Neal Grafton on Fri Jun 12 11:59:00 2015
|
On the subject of uploads, is there a way to restrict the viewing size of an uploaded photo or picture in the config? So it doesn't appear over
more than one page.
Neal |
|
Re: Upload of images fails from mobile platforms when using ELOG under SSL, posted by Stefan Ritt on Fri Jun 12 12:19:50 2015
|
Use thumbnails (need ImageMagick to be installed for that), and you can show for example 300x300 pixel thumbnails of all pictures.
Neal
Grafton wrote:
On the subject of uploads, is there a way to restrict the viewing |
|
Re: dependencies lib, posted by Stefan Ritt on Mon Jun 15 08:28:43 2015
|
If you Google for "libssl.so.6 is needed", you will find for example this site: http://ubuntuforums.org/showthread.php?t=2096126 ,
which tells you to install the libssl-dev package.
alireza |
|
Re: "Preset on reply" not work?, posted by Stefan Ritt on Mon Jun 15 08:33:50 2015
|
You have "Remove on reply" together with "Preset on reply Author". Since the first is executed later, you first preset the author
name, then remove it again. Just discard the "Remove on reply" and you are fine.
Daniel |
|
Re: "Preset on reply" not work?, posted by Daniel Sajdyk on Mon Jun 15 09:16:00 2015
|
Ok. Now it works :) Thank you :) I'm translating Elog into Polish. When I finish, can I send it to you?
Regards Daniel.
Stefan |