That's strange. I use the C function localtime() to obtain the local time from Windows. The documentation says that this function checks the Windows control panel  and returns the proper local time. So far, nobody complained so I guess only you have this problem (anybody else to correct me???). The only hint I found is to set the environment variable TZ. So open a DOS box and enter

set TZ=AST+10

then start elogd.exe interactively in that dos box and see if you get something else.

Well, you can have "inline" pictures like that:

In this case it is clumsy if this image gets displayed twice, once in the text and once as the attachment. So I look at the entry and if I find the image inlined, I suppress the display at the end. Now the "check if the image is shown inline" is a bit stupid, it just looks for the link. So I never thought that someone would just put a link in the text manually. I will have a look and see if I can change that.

Hi all,

I have set my PC in Time Zone GMT+10:00 but I get GMT time in Entry time/Last edit field.

I have installed in another PC. Which has Time Zone GMT+10:00 but I still get GMT time in Entry time/Last edit field.

Please help. Thank you very much.

I'm not sure if this is the expected behavior, but it appears as though an attachment is not displayed in the list of attachments if you manually add a link to the attachment into the body of the entry.  I would greatly appreciate any advice on how to fix or change this behavior.

I will try to demonstrate with the two attachments on this entry.  There are two attachments in this entry, but only one appears in the standard view of the entry.

Picture_1.png.png 

Many thanks,

Devin

Oops, just a typo. The message Attribute "Date" not allowed should read Attribute "ID" not allowed. Fixed in the current SVN version. 

I just ran into this little bug: I had defined a new logbook in my config file and suddenly got the message Attribute "Date" not allowed. While I did have several attributes starting with the word "Date" (e.g. "Date In Service", "Date Retired") I had no attribute "Date" in there. After some pondering and wildly commenting out lines, it finally dawned on me: I had used an attribute "ID" - which is also not allowed. However, it would be very helpful if the error message actually reflected that...

 Hi, Stefan,

Thanks for the quick reply, I've added that to my config and it does what we need.

Cheers, Jay

Hi Jay,

the entry time cannot be changed, because it should reflect the real time when the entry was made. What you can do in your case is to define a "datetime" attribute, which contains then the time stamp. You need something like this:

Attributes = Author, Field time, Subject

Type Field time = datetime

...