Re: Email Config, posted by Stefan Ritt on Wed Apr 18 12:30:51 2018
|
SMTP host = ...
as written in the documentation!
Automatic email after expiration is not possible.
| Stefan Werler wrote: |
|
Hi,
I´m new in ELOG,
Can u explain me how i config the Mailing?
in my Configuration i do have not the ability to set an Email Host/Server. or i didn´t find it....
I have to use ELOG as ticket system, is it possible to send an email automatically after expiration of a period?
|
|
|
Re: Email Config, posted by Andreas Luedeke on Wed Apr 18 13:43:36 2018
|
SMTP host = ...
MUST be set in the [global] section of your configuration - it will likely not work when you try to set it for a specific logbook.
I don't see how ELOG can send an automatic email after a date expired.
But you could set-up a script that checks for expired entries, and if there are any it'll send out an email. You can use any http connection to do the query using the find command (e.g. curl).
To get the right URL, just make the find from the web form and copy the URL that gives you the desired result.
Hope that helps.
Andreas
| Stefan Werler wrote: |
|
Hi,
I´m new in ELOG,
Can u explain me how i config the Mailing?
in my Configuration i do have not the ability to set an Email Host/Server. or i didn´t find it....
I have to use ELOG as ticket system, is it possible to send an email automatically after expiration of a period?
|
|
about shiftcheck, posted by Xuan Wu on Tue May 15 04:41:23 2018 
|
Hi all,
I try to implement a shift check list for our facility. The attributes called "a1, a2, b1, b2 etc" are used in original shiftcheck.html， However, we would like to use "1.1, 1.2, 2.1, 2.2 etc". So I try to change the name of checkbox in shiftcheck.html and the attributes in elogd.cfg file to "1.1, 1.2, 2.1, 2.2 etc". The elog web page can display the attributes like "1.1, 1.2...", but the checked value of "on" seems not working. And I have used wirshark to monitor the http package, the request message seems correct, but the service response seems can't deal with attributes like "1.1, 1.2...", so is there a way to work around? |
|
Re: about shiftcheck, posted by Andreas Luedeke on Tue May 15 10:35:32 2018
|
An attribute is similar to a variable. Do you know any programming language that allows to start a variable with a digit? I don't.
The solution is very obvious: start your attributes with a letter.
Cheers, Andreas
| Xuan Wu wrote: |
|
Hi all,
I try to implement a shift check list for our facility. The attributes called "a1, a2, b1, b2 etc" are used in original shiftcheck.html， However, we would like to use "1.1, 1.2, 2.1, 2.2 etc". So I try to change the name of checkbox in shiftcheck.html and the attributes in elogd.cfg file to "1.1, 1.2, 2.1, 2.2 etc". The elog web page can display the attributes like "1.1, 1.2...", but the checked value of "on" seems not working. And I have used wirshark to monitor the http package, the request message seems correct, but the service response seems can't deal with attributes like "1.1, 1.2...", so is there a way to work around?
|
|
|
Re: about shiftcheck, posted by Xuan Wu on Wed May 16 02:20:24 2018
|
That's true. Thanks for your explanation.
Cheers, Xuan
| Andreas Luedeke wrote: |
|
An attribute is similar to a variable. Do you know any programming language that allows to start a variable with a digit? I don't.
The solution is very obvious: start your attributes with a letter.
Cheers, Andreas
| Xuan Wu wrote: |
|
Hi all,
I try to implement a shift check list for our facility. The attributes called "a1, a2, b1, b2 etc" are used in original shiftcheck.html， However, we would like to use "1.1, 1.2, 2.1, 2.2 etc". So I try to change the name of checkbox in shiftcheck.html and the attributes in elogd.cfg file to "1.1, 1.2, 2.1, 2.2 etc". The elog web page can display the attributes like "1.1, 1.2...", but the checked value of "on" seems not working. And I have used wirshark to monitor the http package, the request message seems correct, but the service response seems can't deal with attributes like "1.1, 1.2...", so is there a way to work around?
|
|
|
|
Enabling SSL, posted by Pasti on Fri May 18 08:04:37 2018
|
Hi all,
I'm following config guide and so far so good. The only issue I run into is when enabling SSL.
Guide says - One can replace this certificate and key with a real certificate to avoid browser pop-up windows warning about the self-signed certificate.
Can you please tell me a more details regards this part? I have acquired security certificate and replaced contents of SSL folder.
Now elogd.exe gets error 1067.
Any help would be highly appreciated.
Thanks! |
|
Report Generating Tool?, posted by Hal Goldfarb on Mon May 21 09:41:57 2018
|
Has anyone developed a report tool for elog? I would like to be able to sort certain items and send them to either a printer, or an email (external to my own use).
If not, any ideas on an easy means of doing this? I write a lot of Perl, so that would be an option for me if the text is easily obtained.
Thanks |
|
Re: Report Generating Tool?, posted by Stefan Ritt on Mon May 21 21:37:36 2018
|
Switch to the "summary" display (try it with this forum). You get headers (like "category"). Clicking on it sorts by that attribute. Then display "all" entries, or use the "find" option to search in certain time periods, then just print the web page.
Alternatively, expeort logbook entries as CSV files, load them into a spreadsheet program, and do the sorting and printing there.
Stefan
| Hal Goldfarb wrote: |
|
Has anyone developed a report tool for elog? I would like to be able to sort certain items and send them to either a printer, or an email (external to my own use).
If not, any ideas on an easy means of doing this? I write a lot of Perl, so that would be an option for me if the text is easily obtained.
Thanks
|
|
|