How to sort on any field?, posted by John on Tue Apr 30 05:52:44 2019
|
Hi, I was wondering if this is possible. I've tried to sort on anything other than the first few fields and although the screen refreshes like it
is 'doing something', it does NOT sort. Sometimes it will take me to the last page of my data, but still no sorting. I use Debian Linux verson
of Elog. There have been no other issues. I need to figure out how to do this without parsing it to another program first. Thanks again for this wonderful |
Re: exclude access to a number of users in one logbook, posted by Stefan Ritt on Tue Apr 30 09:34:52 2019
|
You have a look here: elog:68936
Nikolas
Patronis wrote:
How can I exclude the access of a number of users in one (out of |
|
Re: How to sort on any field?, posted by Andreas Luedeke on Tue Apr 30 14:20:34 2019
|
Sorting does work fine, if you do it correctly. From your post I cannot even guess what you've tried - let alone tell you what you did wrong.
Please post your config, some example entries and a description of what you've tried, what you expected to happen and what actually happened.
Screenshots are often very useful as well. |
Re: How to sort on any field?, posted by John on Tue Apr 30 19:07:17 2019
|
Hi Andrea and thank you soo much for your kind and prompt reply! I believe the issue will be solved as I have the information I need to proceed.
I was just wanting to verify that sorting indeed is alloud on ALL fields. I cannot send the exact config as it is a work project, but I can replicate
with fake fields and data if necessary in the future. I believe my errors are because I am either using field names which are 'special' to the |
|
Re: Last default = <n>, posted by Stefan Ritt on Wed May 1 11:06:04 2019
|
It works for me. Have you tried other values (1, 3, 7, ..)? The key is that the quick filter changes to "Last month". If it does not, there
must be some trivial error, like type in elogd.cfg, you modify the wrong logbook, have a very old version of elog etc.
Stefan |
|
Re: Last default = <n>, posted by Stefan Ritt on Wed May 1 11:08:10 2019
|
You say "Show Last Default = 31". This options applies only to the "Find" page, the option "Last Default = 31" works for
the quick filter. Probably you have to change "Show Last Default" to "Last Default".
Stefan |
Re: Last default = <n>, posted by Alan Grant on Wed May 1 15:28:41 2019 
|
I was just referring to "Show last default" (under Find) as a parallel example of how I assume "Last default" should
function on the List page.
I also tried values 3 and 7 but "All entries" still displays in the "List period" box. A restart of elogd makes no difference. |
|
Re: Last default = <n>, posted by Stefan Ritt on Fri May 3 15:50:39 2019
|
I just tried your elogd.cfg, and it works fine for me. So no idea what is wrong in your case.
Stefan |