Cannot submit due to authentification errors, posted by Informatica Unidad SSBB AEMET VALENCIA on Fri Aug 16 13:24:26 2019
|
Hi everyone.
We are new in ELOG. We have installed it and created new logbooks following the "demo" one. We have configured our SMTP host, with email and pass, but we obtain this error when submit
Error sending Email via <i>"mdm.correo.gob.es"</i>: 5.7.8 Error: authentication failed: another step is needed in authentication
Do you know why and give us some tips for solution?
Our bests,
Informática AEMET Valencia
|
Re: Cannot submit due to authentification errors, posted by Andreas Luedeke on Sat Aug 17 22:23:34 2019
|
If you post the [global] part of your configuration, it would help a little bit to understand the problem.
Cheers, Andreas
| Informatica Unidad SSBB AEMET VALENCIA wrote: |
|
Hi everyone.
We are new in ELOG. We have installed it and created new logbooks following the "demo" one. We have configured our SMTP host, with email and pass, but we obtain this error when submit
Error sending Email via <i>"mdm.correo.gob.es"</i>: 5.7.8 Error: authentication failed: another step is needed in authentication
Do you know why and give us some tips for solution?
Our bests,
Informática AEMET Valencia
|
|
|
Re: Cannot submit due to authentification errors, posted by Informatica Unidad SSBB AEMET VALENCIA on Mon Aug 19 14:09:22 2019
|
I try with gmail account and neither it works.
I'm using Windows 10 and it runs into a proxy defined as URL
[global]
port = 80
SMTP host = mdm.correo.gob.es
SMTP username = XXXX@aemet.es
SMTP password = XXXXXX
SMTP port = 25
URL = http://proxy.aemet.es:3128/
Thanks
| Andreas Luedeke wrote: |
|
If you post the [global] part of your configuration, it would help a little bit to understand the problem.
Cheers, Andreas
| Informatica Unidad SSBB AEMET VALENCIA wrote: |
|
Hi everyone.
We are new in ELOG. We have installed it and created new logbooks following the "demo" one. We have configured our SMTP host, with email and pass, but we obtain this error when submit
Error sending Email via <i>"mdm.correo.gob.es"</i>: 5.7.8 Error: authentication failed: another step is needed in authentication
Do you know why and give us some tips for solution?
Our bests,
Informática AEMET Valencia
|
|
|
|
Drag and drop does not work in 3.1.3?, posted by Lech on Tue Aug 20 09:47:06 2019
|
Hello,
I can paste images into text (which resulted in the text_size too long error message), however, I can't drop them on my elog. However, I can do it on the demo version. Was the drag and drop into text already supported in version 3.1.3 and I am just missing some configuration option, or do I need to find a repository with a more recent version of elog?
Thanks! |
|
Re: Drag and drop does not work in 3.1.3?, posted by Stefan Ritt on Tue Aug 20 10:34:37 2019
|
The Drag & Drop was implemented already in 3.0.0 (see https://elog.psi.ch/elog/download/ChangeLog). So no idea why it's not working for you.
Stefan
| Lech wrote: |
|
Hello,
I can paste images into text (which resulted in the text_size too long error message), however, I can't drop them on my elog. However, I can do it on the demo version. Was the drag and drop into text already supported in version 3.1.3 and I am just missing some configuration option, or do I need to find a repository with a more recent version of elog?
Thanks!
|
|
|
Re: Cannot submit due to authentification errors, posted by Stefan Ritt on Tue Aug 20 11:06:47 2019
|
Elog supports only a limited set of authentications for SMTP. Both GMail and probably also your server requires more advanced authentication schemes, which are not suppoerted by elog. Sorry.
Stefan
| Informatica Unidad SSBB AEMET VALENCIA wrote: |
|
I try with gmail account and neither it works.
I'm using Windows 10 and it runs into a proxy defined as URL
[global]
port = 80
SMTP host = mdm.correo.gob.es
SMTP username = XXXX@aemet.es
SMTP password = XXXXXX
SMTP port = 25
URL = http://proxy.aemet.es:3128/
Thanks
| Andreas Luedeke wrote: |
|
If you post the [global] part of your configuration, it would help a little bit to understand the problem.
Cheers, Andreas
| Informatica Unidad SSBB AEMET VALENCIA wrote: |
|
Hi everyone.
We are new in ELOG. We have installed it and created new logbooks following the "demo" one. We have configured our SMTP host, with email and pass, but we obtain this error when submit
Error sending Email via <i>"mdm.correo.gob.es"</i>: 5.7.8 Error: authentication failed: another step is needed in authentication
Do you know why and give us some tips for solution?
Our bests,
Informática AEMET Valencia
|
|
|
|
|
Re: Drag and drop does not work in 3.1.3?, posted by Lech on Tue Aug 20 11:37:03 2019
|
Can I find the config of the demo elog somewhere, so I could try it locally?
| Stefan Ritt wrote: |
|
The Drag & Drop was implemented already in 3.0.0 (see https://elog.psi.ch/elog/download/ChangeLog). So no idea why it's not working for you.
Stefan
| Lech wrote: |
|
Hello,
I can paste images into text (which resulted in the text_size too long error message), however, I can't drop them on my elog. However, I can do it on the demo version. Was the drag and drop into text already supported in version 3.1.3 and I am just missing some configuration option, or do I need to find a repository with a more recent version of elog?
Thanks!
|
|
|
|
Re: Drag and drop does not work in 3.1.3?, posted by Stefan Ritt on Tue Aug 20 11:45:14 2019
|
It's the config from the distribution. A copy is below.
Stefan
[global]
port = 8080
[demo]
Theme = default
Comment = General Linux Tips & Tricks
Attributes = Author, Type, Category, Subject, Pinned
Options Pinned = boolean
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Options Category = General, Hardware, Software, Network, Other
Extendable Options = Category
Required Attributes = Author, Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type
Last default = 31
| Lech wrote: |
|
Can I find the config of the demo elog somewhere, so I could try it locally?
| Stefan Ritt wrote: |
|
The Drag & Drop was implemented already in 3.0.0 (see https://elog.psi.ch/elog/download/ChangeLog). So no idea why it's not working for you.
Stefan
| Lech wrote: |
|
Hello,
I can paste images into text (which resulted in the text_size too long error message), however, I can't drop them on my elog. However, I can do it on the demo version. Was the drag and drop into text already supported in version 3.1.3 and I am just missing some configuration option, or do I need to find a repository with a more recent version of elog?
Thanks!
|
|
|
|
|