Synchronization with SSL does not yet work. I have to find some time to implement it. Since you are already the second one mentioning this, it slipped higher on my to-do list  

I installed ELOG on a Linux server (CentOS 5.2) and a WinXP laptop.

- If I set both servers to non-SSL, I can synchronize with no problems.

- If I set both servers to use SSL, synchronization fails with "Error code: ssl_error_rx_record_too_long" 

- If I set one to ssl and the other non-ssl, synchronization fails with "Remote server is not an ELOG server"

Is anyone synchronizing or mirroring two ELOG servers with SSL? When either or both servers are set to use SSL, I can use either site. but I can't synchronize.

Thanks

[global]
port = 8080
Bottom text = Hello
Bottom text login = Login Hello
Password file = passwd

[demo1]
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Page Title = ELOG - $subject

[demo2]
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject

 Hi Stefan,

Hope you have enjoyed the Christmas week.

Sorry for the delay.... I have tested your configuration and it worked for me as well. 

In order to determine, which of my settings is causing the problem, I had to activate each individual entry "one by one" and check if the error re-occured. I finally identified following entry "Protect Selection page = 1"

The error also occurs if I change your configuration into:

[global]
port = 8080
Bottom text = <center>Hello</center>
Bottom text login = <center>Login Hello</center>
Password file = passwd
Protect Selection page = 1

[demo1]
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Page Title = ELOG - $subject

[demo2]
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject
 

Can you advise if I'm missing an entry in order for "Protect Selection page = 1" to work?

"Schönen Rutsch ins neue Jahr".

Regards, 

Barend

 Thank you!

For 'execute edit' this worked from the beginning. 

 This sounds very good! Thank you very much (Could you please add this functionality for execute edit too? Please :-))

Steve

Attribute substitution on 'execute delete' was not implemented, since I thought that the ELOG message ID would be used as the primary key in an SQL database, so one would not need the attributes. I added howver this functrionality in SVN revision 2159, so the next release will contain this fix. 

Hi all,

i have problems with execute delete (execute new works fine) in following config (the attribute 'Counter' will not evaluated). Can anybody help me?

Here is the config:

Attributes = Counter, Autor, Adressat, Start, Ende, Mitteilung, TextBeachten

Show Attributes = Counter, Autor, Adressat, Start, Ende, Mitteilung, TextBeachten
Show Attributes Edit = Counter, Autor, Adressat, Start, Ende, Mitteilung, TextBeachten


Type Start = date
Type Ende = date
Required Attributes =  Autor, Adressat, Start, Ende, Mitteilung
Extendable options = Adressat
Preset Autor = $long_name
Preset Counter = SoMi-#####



Locked Attributes = Autor, Counter
Required Attributes =  Adressat, Start, Ende, Mitteilung

Options Adressat = Alle, 1. Semester, 2. Semester, 3. Semester, 4. Semester, 5. Semester, 6. Semester, 7. Semester, 8. Semester
MOptions Textbeachten = Bitte Mitteilungs-Text anzeigen lassen



Execute new = C:\xampp\mysql\bin\mysql.exe -h localhost -u root -p123456 -D screen -e "insert into somi (counter,adressat,start,ende,kumi,mitlami,lami) values ('$Counter', '$Adressat', '$Start', '$Ende', '$Mitteilung',  '$TextBeachten', '$text')"


Execute delete = C:\xampp\mysql\bin\mysql.exe -h localhost -u root -p123456 -D screen -e "delete from somi where counter='$Counter'"

Thanks in advance and Merry Christmas!!

Steve