> > I have been running ELOG on FreeBSD no problem for a year now,
> > but this new version 2.5.8-x doesn't seem to wanna work, it compiles fine 
> > with a few warnings (see attached logs).
> > But has issues with password files, now it shows message "Can't open 
> > passwords.pwd" for all my logbooks. It did convert the password files to 
> > xml format. I had a good hard look at file permissions and config file with 
> > no luck. So I went back a version and compiled 2.5.7-1 which works just 
> > fine with old password files. So something with XML & FreeBSD?...
> 
> Hard to say. The simplest would be if I could debug this.

Anything I could send you to help debug this?

> 
> > Version 2.5.7-1 (maybe this has been fixed in 2.5.8?)
> > When I run a ./elogd -C http://elog.blah.here:88 it clones the config file 
> > just fine, also seems to copy over all logbook entries.
> > But once I look through them there's a fault with one of the fields it 
> > copies over, so entries never show up.
> > 
> > It should be:
> > ========================================
> > Date: Tue Mar 01 19:41:29 2005
> > In reply to: 24
> > Work done by: someuser
> > Work done at (dd/mm/yy hh:mm):  1/03/05 3:30pm
> > Downtime duration: 0 min
> > Planned: Yes
> > Reason: Normal work
> > Attachment:
> > Encoding: plain
> > 
> > But once cloned it looks like this:
> > ========================================
> > Date: Tue Mar 01 19:41:29 2005
> > In reply to: 24
> > Work done by: someuser
> > Work done at (dd/mm/yy hh: m):  1/03/05 3:30pm
> > Downtime duration: 0 min
> > Planned: Yes
> > Reason: Normal work
> > Attachment:
> > Encoding: plain
> > 
> > 
> > For some reason it looses the "m" so line 4 instead of having
> > "hh:mm" has "hh: m"
> 
> Your problem is that the attribute "Work done at (dd/mm/yy hh:mm)" which
> contains a ":". This character is not allowed in attributes. Unfortunately I did
> not document this (and even didn't know this until now... (;-) ). So you should
> use the new option
> 
> Type Work done at = datetime
> 
> this gives you at the entry mask fields for day/month/year/hour/minute to fill
> out, so you don't have to write it directly into the attribute. Another option
> would be to use 
> 
> Comment Work done at = Please enter as (dd/mm/yy hh:mm)
> 
> which just displays a comment below the attribute in the entry mask.
> 
> - Stefan

Ok, i see, the problem for me now is that this attribute name has been in use for 
half a year or so by me. So now I have 100's of logbook entries with the old name 
in them, if I change it's name then all old logbook entries will show up with that 
field blank. I'm not sure if there's an easy way to change that attribute's name in 
100's of entries in 10's of logbooks, because I wouldn't want to try doing that by 
hand.. Any ideas? (i'm no good at scripting something like that 4 sure)

Thanks,
G.

Hi everybody,

I am trying to setup my personal ELog, defining attributes and stuff like that. I just tried to make some nested commands but I really could not achieve that. 

The idea is something like this:

Attributes = Author

Options Author = Tizio{1}, Caio{2}, Sempronio{3}

{1} Attributes = Author, Project

{1} Options Project = Proj1{a}, Proj2{b}, Proj3{c}

{a} Attributes = Author, Project, Year

{a} Options Year = 2017, 2019

Anyway, when I select Proj1 nothing really happens. So, is there any way to set up nested commands like in the reported example?

Many thanks in advance!

P.S. Is there any documentation in which are reported all the possible commands that can be used?   

Good morning,

I would like to ask you whether it is feasible to establish a logbook that limits access to entries, enabling each user to view only their own.
Although creating a logbook per user is an apparent solution, it does not meet my requirements.

Thank you in advance.

Leonardo

I want exchange the logs as files and not with the mirroring function. My 
collegue and me are already exchanging all our project files, so the logs from 
ELOG could be included in this exchange.

When I upload a HTML-File as attachement the file is shown as the
HTML-source and not as the formatted text. Is there a possibility to see the
HTML-attachements as formatted text like images are shown as images?

Yesterday I mad a little experiment:
I copied in OpenOffice the content from my HTML file, which was not shown correctly
in ELOG, to a new HTML file, uploaded it in ELOG, and now my file was shown
correctly formatted. The only one problem is that not all lines are shown, in the
last line is written ...1753 more lines... . How can I show all lines? Do I have to
recompile ELOG?

I think this is reasonable. All the HTML-files which I want insert (created with the software
INCA) are not shown correctly. My testfiles made with OpenOffice are shown correctly. Maybe
you have the time to program an option for the attachement "Show inside/Show in new window or
tab", so that the user can choose, how his HTML file is shown. Similiar to the option "Submit
as HTML text".