Upgrading to 2.9, posted by Maureen Kular on Mon May 2 22:39:23 2011
|
I am in the process of upgrading from 2.6.0 to 2.9.0. I am installing it on a windows 2008 r2 server which is 64 bit. I am having a few issues and am just wondering if Windows 2008 R2 is support with version 2.9.0. Is there anything I need to know about the installation other than just run the exe file? So far I have run the exe file and installed the software, the service is running, however I cannot get into the application. I do not have IIS installed, it does mention it in the installation documentation, is this a requirement? Any hints or ideas at this point would be appreciated. I am close I just need that last tweek. Thanks |
|
Upgrading to 2.9, posted by Maureen Kular on Mon May 2 22:39:24 2011
|
I am in the process of upgrading from 2.6.0 to 2.9.0. I am installing it on a windows 2008 r2 server which is 64 bit. I am having a few issues and am just wondering if Windows 2008 R2 is support with version 2.9.0. Is there anything I need to know about the installation other than just run the exe file? So far I have run the exe file and installed the software, the service is running, however I cannot get into the application. I do not have IIS installed, it does mention it in the installation documentation, is this a requirement? Any hints or ideas at this point would be appreciated. I am close I just need that last tweek. Thanks |
Re: FCKEditor not working correctly on a Windows server., posted by Matthew Sauder on Fri Sep 23 23:38:28 2016
|
I know I'm a little late but is there a way to do this from elog? I've tried using the following line in the config but it doesn't seem to work in IE10. I figure if there is a way to modify the <head> before the page loads there could be hope.
Top text = <script>var meta = document.createElement('meta');meta.httpEquiv = "X-UA-Compatible";meta.content = "IE=edge";var head = document.getElementsByTagName('head')[0];head.insertBefore(meta, head.firstChild);</script>
| Richard Stamper wrote: |
|
If you are using IE as your browser, the problem may be with that rather than the server. By default IE 11 display intranet sites in a "Compatibility mode" which breaks the FCKEditor in Elog version 3. Fortunately this mode can be disabled, which is what I have had to advise users here to do.
- Click on the "cogwheel" and select "Compatibility settings"
- Deselect "Display intranet sites in Compatibility view"
Pictures attached
| Marty Jansen wrote: |
|
Sorry for the late reply. I have installed a slightly newer version of Elog, but the results are the same. I do get de the 3 editor bars, but the top 2 are greyed out and the bottom one doesn't do anything if clicked. I have commented out the lines that refer to the online equation editor, but that doesn't help much either. I think I let it rest. The old 2.9.xx version still works great, so we leave it at that.
Thanks anyway for the suggestions
Marty
| Marty Jansen wrote: |
|
Hi,
After working many years with previous versions of ELOG, I decided to update to the latest version.
I have installed ELOG version 3.1.0 on a WIndows 2012R2 server with IE 1. The editor is showing up, but everything is greyed out, execpt for some items on the bottom row. (Style, Lettertype...) and after I do load a preset text form with different colors, the page remains white. The tables and text in the form is showing up.
The previous version with the older editor was working great on the same server.
Any suggestions?
|
|
|
|
|
Unable to resize images in browser, posted by Matthew Deller on Tue Feb 18 21:32:27 2014
|
I am unable to resize/ manipulate images in browser. Image Magick detected Version: ImageMagick 6.6.9-7 2012-08-17.
Output when running elog with verbose option shows buffer overflow when resize attempted:
[[Going to execute: /bin/sh -c "identify -format '%wx%h %c' '/home/elog/elog-2.9.2/logbooks/HardwareLog/140218_120423_2014-02-18_remod_(extended_II).png.png'" > /tmp/elog-shell 2>&1
Falling back to default group "elog"
Falling back to default user "elog"
*** buffer overflow detected ***: elogd terminated
Any ideas how to fix this? I'm not sure if this is a problem with the elog / Ubuntu / Image Magick? |
|
Exim4, posted by Matthew D. on Tue Apr 23 22:14:42 2013
|
Hi,
My email configuration is a little complicated as all emails must be relayed to a central server with TLS authentication.
So far I've been unable to get the ELOG to work with email, after numerous attempts . I have got exim4 working on this machine but I don't understand how the elog sends emails well enough, to configure it to recognise and use exim4. Setting localhost/ my domain/ IP (and variations) under 'smtp host' doesn't work. (cannot connect to server)
The most interesting error I have been able to get is:
"AUTH command used when not advertised"
or
"Unrecognized authentication type"
Any advice?
|
|
Write only, posted by Matthew on Thu Jan 30 19:52:46 2003
|
I'm interested using elog for a lab notebook. Once entries have been
entered they cannot be changed/edited.
Is it possible for elog to be setup to support something like this? A write
only mode? |
|
Re: Write only, posted by Matthew on Fri Jan 31 20:47:51 2003
|
Does this truly disable the edit command or just hide it?
> > I'm interested using elog for a lab notebook. Once entries have been
> > entered they cannot be changed/edited.
> > Is it possible for elog to be setup to support something like this? A write
> > only mode?
>
> What you need is an entry in the elogd.cfg file:
>
> Manu commands = Back, New, Reply, Find, Config, Logout, Help
>
> As you see, the "Edit" and "Delete" commands are missing here and therefore
> do not get displayed. So you can enter a message with "New", but you cannot
> change it afterwards. |
|
Re: Implementation of RSS feeds, posted by Matthew on Tue Jan 4 00:55:26 2005
|
The <pubDate> item doesn't appear to be a valid RFC-822 date. Causes some
aggregators to fail when parsing.
The error is shown by Feedvalidator:
http://www.feedvalidator.org/check.cgi?url=http%3A%2F%2Fmidas.psi.ch%2Felogs%2FForum%2Felog.rdf
> I implemented experimentally RSS feeds into Elog. Before releasing this new
> addition, I would like to collect some experience with it. This forum now
> supports RSS feeds, for which you can subscribe with a RSS feed reader like
> Mozilla Firefox. Please give it a try and send me any feedback.
>
> For an introduction to RSS feeds, please see
>
> http://www.webreference.com/authoring/languages/xml/rss/intro/
>
> To subscribe to a logbook, enter following URL into your RSS reader:
>
> http://<your-elog-host.domain>/<logbook>/elog.rdf
>
> From the newest Mozilla Firefox browser, you can also click on the RSS box at
> the lower right corner of the browser (see attachment). |