The server is crached because the author field was accidentally filled with a long string due to an automated (remote) script:

“
Author: The ion getter pump has successfully recovered and appears to be operating steadily once more. Consequently, I proceeded with sputtering to obtain an XPS survey scan of the Au sample.  Initially, the stability of the X-ray function was compromised, leading to multiple interruptions. Subsequently, an unexplained issue arose regarding the collection of counts on the channeltron detector. Additionally, the emission current exhibited fluctuations. Fortunately, it seems that we have addressed and resolved the previous issues.  In the image below, two XPS survey spectra are presented. The spectrum highlighted with a red line corresponds to the AlKa source, which was selected using the AlKa button. Conversely, the spectrum with a black line represents the MgKa source. In both cases, the energy configuration was set to 1486.7 eV. It's worth noting that the 1050 eV peak in both spectra corresponds to the Au4f state, with an energy displacement of 961.7 eV due to X-ray ghost lines caused by O contamination (84+961.7). It has come to my attention that the Mg source appears to have oxidized, a phenomenon we've observed before.  Moreover, it's important to highlight that the difference between the peaks in the low binding energy region is approximately 100 eV, not the expected 233 eV (considering the energy difference between magnesium and aluminum). This observation holds true for both cases where the same energy setting was used. Additionally, the energy of the Au4f peakSotirios Tsatso
“

Instead of just "Sotirios Tsatso". 

So it had nothing to do with the cookies etc.. But when the item created in this way was called up, the system crashed:

[248459.853246] elogd_misc[8407]: segfault at 561725164a4e ip 00007f8210c02854 sp 00007ffdcb92b338 error 4 in libc-2.31.so[7f8210a99000+178000]
[248459.853251] Code: 7f 07 c5 fe 7f 4f 20 c5 fe 7f 54 17 e0 c5 fe 7f 5c 17 c0 c5 f8 77 c3 48 39 f7 0f 87 ab 00 00 00 0f 84 e5 fe ff ff c5 fe 6f 26 <c5> fe 6f 6c 16 e0 c5 fe 6f 74 16 c0 c5 fe 6f 7c 16 a0 c5 7e 6f 44

Please advise on how to set up selective email notification on logbooks; We want to send an email to specific people when an event that involves them is entered? 

At the moment, we currently get an email entry for every new logbook entry. Thanks

See drawing below: We have a beam on and a beam off time. We want to fill in the lost time automaticaaly. Please can you help? Julian

Stefan, I am not an expert in this field so I wondered how one goes about finding someone to write this and how one amends the soruce code? Is that allowed?  Is it a feature than may be of use for other users? Julian

Thanks Andreas, I will read that section. Julian

I have define a MOption  BACKUP = Server, Switch, Router any now i link to use the Status of the Backup Option to display diffrent html file in the Text field, i the a posible way to do this ?

sample:

MOption  BACKUP = Server, Switch, Router

{Server&Switch&Router} Present Text = file1

{Server&Switch} Present Text  = file2

The mxml source code should be moved into the elog-*/src directory. This requires changing the Makefile to:

MXMLDIR = src/mxml

Reason for change: if you want to build several versions of elog and you unpack the distributions in the same top-level directory, the most recently unpackaged version will overwrite the mxml directory contents, possibly introducing bugs.

I installed elog 2.7.2 rev 2041 into /data/elog on Redhat ES 4 Update 4. This is my initial elogd.cfg file:

[global]
port = 80
Resource dir = /data/elog/elog
Logbook dir = /data/elog/elog/logbooks
Logfile = /data/elog/elog/logs/access_log
Logging level = 2
Resolve host names = 0
Usr = nobody
Grp = nobody

[demo]
Theme = default
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Options Category = General, Hardware, Software, Network, Other
Extendable Options = Category
Required Attributes = Author, Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type

and start elogd - all is right with the world, everything is working properly. I shut down elog and try to add more logbooks using this template:
[A-B]
Subdir = cr_a-b
Comment = Change requests for Customers A-B
Menu commands = New, Reply, Download, Find, Last day
List Menu commands = New, Find
Display mode = summary

I create 14 of them, one for every 2 letters of the English alphabet and 0-9. The logbook name and Subdir change appropriately. When I start elog, it stays up for about 30 seconds, then crashes. No messages are recorded in syslog nor in the logfile. The only thing that looks suspicious are a couple lines in syslog:
Feb 15 17:11:05 iadopsutil04p elogd[23761]: elogd 2.7.2 built Feb 14 2008, 20:55:38 
Feb 15 17:11:05 iadopsutil04p elogd[23761]: revision 2041
Feb 15 17:11:05 iadopsutil04p elogd[23761]: FCKedit detected
Feb 15 17:11:05 iadopsutil04p elogd[23763]: Cannot restore original GID/UID.
Feb 15 17:11:05 iadopsutil04p elogd[23763]: Cannot remove pidfile "/var/run/elogd.pid" ; Permission denied
Feb 15 17:11:05 iadopsutil04p elogd[23761]: Server listening on port 80 ...

This is obviously the child process responsible for the highlighted lines and it's coming from the cleanup function. Why it's getting called is beyond me.
Ideas?