Anyone else running elogd on redhat ES 8 having random crashes?, posted by mathew goebel on Tue Oct 4 20:43:28 2022
|
For the last couple of months we are getting a random elogd crash once in a while we are getting something like the following in the middle of the night
> Sep 29 20:45:07 elog kernel: server_name686835]: segfault at 7ffd7f5a0000 ip 00007fceaeabbf06 sp 00007ffd7f577348 error 6 in libc-2.28.so[7fceaea8a000+1bc000] |
Re: Anyone else running elogd on redhat ES 8 having random crashes?, posted by Stefan Ritt on Wed Oct 5 08:21:12 2022
|
Most likely these are some currupt logbook files. If you get a coredump (or stack trace) you can maybe figure out which file it was. These are plain
ASCII files (YYMMDDa.log) and you can see with an editor if someting there is not in order.
Stefan |
|
Re: Anyone else running elogd on redhat ES 8 having random crashes?, posted by mathew goebel on Wed Oct 5 20:39:16 2022
|
Thanks for the info!
Stefan
Ritt wrote:
Most likely these are some currupt logbook files. If you get a coredump |
UNC Pfade, posted by Michael on Wed Oct 19 13:52:24 2022
|
Hallo,
gibt es eine Möglichkeit das subdir auf ein Netzlaufwerk zu legen?
\\server\freigabe\... |
|
Re: UNC Pfade, posted by Stefan Ritt on Wed Oct 19 14:08:15 2022
|
UNCs are not officially supported by elog, but your operating system might map them if you're lucky, just try. It is however not recommended to do
so, since network drives can sometimes be slow during network congestion and the response of elog will then suffer.
Stefan |
|
Re: UNC Pfade, posted by Michael on Thu Oct 20 07:53:31 2022
|
So there is no way to save the file on the network?! :(
Can i install the elog on a windows server? i tried it yesterday, but i think i missed something, couse i only could open the elog on the server
and not with a client pc. |
|
Re: UNC Pfade, posted by Antonio Bulgheroni on Thu Oct 20 08:37:23 2022
|
I'm running ELOG on a windows server 2016. Just installed the windows installer and worked out of the box.
Have you checked the firewall?
Michael |
|
Post using html form , posted by Hayg Guler on Thu Oct 20 16:52:09 2022
|
Dear All,
we are trying to post from an HTML form, as included in our config file :
|