Hello,

We have accumulated some duplicate 'types' in one of our logbooks.  Is it possible to merge them?

Thanks,

John

all instances of elogd use the same file name in /tmp when calling my_shell.  This can cause some inconsistent behavior when two or more copies of elogd are runnnig at the same time.  (eg. one might detect ImageMagik is installed, and the other not,)

The propsed solution is to have the parent read from a pipe to the child rather from a file.  A patch is attached.

Is there any documentation I can go through that explains how to remove the Certificate Error I am getting as shown in the attachment.  I have tried creating my own certificate and putting it in the elog ssl folder but that just prevented the elog service from starting.  Any help would be greatly appreciated.  Thanks.

> 
> How did you create the certificate?
> Are you running eLog on a server with more than one host name (CNAME entries) and are you pointing to your eLog
> via one of that aliases?
> 
> Certificates that work with an Apache 1 Web server do work with eLog, too.
> 
> GS

The certificate that is on there right now is the one that gets created when you install elogs.  I have tried 
creating one with a windows server 2008 box with the CA role installed.  The certificate is created without issue 
and I can install it on the server but when I try to restart the elog service it wont start until I put the 
original server.crt and server.key file back into the ssl directory.  

I have DNS on the machine but only have one CNAME pointing to the elog server.

I don't know a lot about certificates so sorry if this doesn't help out much. 

> > The certificate that is on there right now is the one that gets created when you install elogs.  I have tried 
> > creating one with a windows server 2008 box with the CA role installed.  The certificate is created without issue 
> > and I can install it on the server but when I try to restart the elog service it wont start until I put the 
> > original server.crt and server.key file back into the ssl directory.  
> 
> How did you install the certificate? Maybe it ended up in the IIS directory and not in the elog directory?

That is a good point.  I just installed the cert by double clicking on it.  Then selecting either trusted root CA or 
personal to install the certificate.  Is there a different way to install the certificate for elog?

Thanks alot for your help.

> > 
> > The certificate that is on there right now is the one that gets created when you install elogs.  I have tried 
> > creating one with a windows server 2008 box with the CA role installed.  The certificate is created without issue 
> > and I can install it on the server but when I try to restart the elog service it wont start until I put the 
> > original server.crt and server.key file back into the ssl directory.  
> > 
> 
> I don't know anything about Windows server CA, but eLog is very strict in the syntax of the CERTs.
> I had to learn it the hard way when installing a chain CERT.
> 
> For server.crt and server.key it MUST NOT be a chain cert. Therefor you have to use chain.crt
> 
> Are the generated CERTs ASCII (with only one -----BEGIN CERTIFICATE----- and -----END CERTIFICATE----- in
> server.crt 
> and -----BEGIN RSA PRIVATE KEY----- and -----END RSA PRIVATE KEY----- in server.key)?
> 
> So the eLog generated keys should look like..
> 
> GS

Thanks for your reply.  I appreciate it alot.

When I created my certificate it came out as a .cer [there was no .key file] and looking at the code that was posted 
below it looks like unless there is a server.crt and server.key file in the ssl folder the program will exit:  So I 
guess I need to figure out how to generate a certificate that elog will understand using a .key file and a .crt file.  
So I might have to research certificates more.

To be honest I'm not an expert on SSL. I just use following code inside ELOG to initialize the SSL connection:

SSL_CTX *init_ssl(void)
{
   char str[256];
   SSL_METHOD *meth;
   SSL_CTX *ctx;

   SSL_library_init();
   SSL_load_error_strings();

   meth = SSLv23_method();
   ctx = SSL_CTX_new(meth);

   strlcpy(str, resource_dir, sizeof(str));
   strlcat(str, "ssl/server.crt", sizeof(str));
   if (!file_exist(str)) {
      eprintf("Cerificate file \"%s\" not found, aborting\n", str);
      return NULL;
   }
   if (SSL_CTX_use_certificate_file(ctx, str, SSL_FILETYPE_PEM) < 0)
      return NULL;

   strlcpy(str, resource_dir, sizeof(str));
   strlcat(str, "ssl/server.key", sizeof(str));
   if (!file_exist(str)) {
      eprintf("Key file \"%s\" not found, aborting\n", str);
      return NULL;
   }
   if (SSL_CTX_use_PrivateKey_file(ctx, str, SSL_FILETYPE_PEM) < 0)
      return NULL;
   if (SSL_CTX_check_private_key(ctx) < 0)
      return NULL;

   strlcpy(str, resource_dir, sizeof(str));
   strlcat(str, "ssl/chain.crt", sizeof(str));
   if (file_exist(str))
      SSL_CTX_use_certificate_chain_file(ctx, str);

   return ctx;
}

Hi,

I've been exploring elog. I find when using IE 11, the text editor formatting buttons don't work with HTML encoding selected. The entire toolbar is grayed out. It appears to work fine with Chrome. Any ideas or direction to look? elog v3.1.1 is running on RedHat EL5. I've tried the rpm installation, and source code compilation and installation with no change.

Any input would be greatly apriciated!

John

The issue was IE Compatibility Mode. There were no websites in the list, but the "Display intranet sites in Compatibility View" was checked. Removing this fixed it.

Thanks for the help!

John