ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
137
|
Tue Sep 24 16:59:11 2002 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug fix | | | Re: Error with not existing user name |
> Elogd v. 2.1.2:
>
> When trying to acces a password protected Log (global password file) with a
> non existing username one gets the response : cannot open file : <pw
> filename>
>
> Better would be a message like: wrong user or password!
Has been fixed in 2.2.0 |
102
|
Mon Aug 12 17:04:30 2002 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | | | Re: Error while trying to change password (elogd 2.1.0) |
> When logging in with a username and password; then trying to logout or
> change password one gets the following message:
>
> Error: Parameter value too big. Please increase VALUE_SIZE and recompile
> elogd ; Please use your browser's back button to go back
>
> (up to now I have not yet tried to recompile - may be it works then)
That's strange. This error should only occur if someone uses a user name or
password with more than 256 characters, which I hope is not the case. Have
you tried changing your password etc. in this forum? It also runs 2.1.0 on
Linux.
I made a version under
http://midas/cgi-bin/cvsweb/~checkout~/elog/elogd.c?rev=2.67&content-
type=text/plain
which has improved error output for this problem, maybe this helps. |
105
|
Wed Aug 14 13:44:12 2002 |
| Stefan Siegel | ssiegel@lucent.com | Bug report | | | Re: Error while trying to change password (elogd 2.1.0) |
> > When logging in with a username and password; then trying to logout or
> > change password one gets the following message:
> >
> > Error: Parameter value too big. Please increase VALUE_SIZE and recompile
> > elogd ; Please use your browser's back button to go back
> >
> > (up to now I have not yet tried to recompile - may be it works then)
>
> That's strange. This error should only occur if someone uses a user name or
> password with more than 256 characters, which I hope is not the case. Have
> you tried changing your password etc. in this forum? It also runs 2.1.0 on
> Linux.
>
> I made a version under
>
> http://midas/cgi-bin/cvsweb/~checkout~/elog/elogd.c?rev=2.67&content-
> type=text/plain
>
> which has improved error output for this problem, maybe this helps.
Hi,
changed the VALUE_SIZE from 256 to 512. That seems to fix the problem.
Regards,
Stefan |
67612
|
Wed Nov 13 16:31:28 2013 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Windows | 2.9.2 | Re: Error when attempted to submit an entry |
Hung Dao wrote: |
One of my users reported that he received this error when attempted to submit an editing entry. Basically he is only one to edit this entry. When go ahead to press the button, the entry is updated successfully. What cause and how to prevent this error not to populate? Thanks |
Please read the documentation in https://midas.psi.ch/elog/config.html und the option "Use Lock". If you don't need locking, just turn it off. |
2266
|
Thu Jun 28 17:12:11 2007 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | 2.6.5 | Re: Error sending Email via "XXX.XXX.XXX.XXX" |
JJ Sheppard wrote: | 220 Welcome to the @Mail v4.4 SMTP Server ( Exim )
EHLO server.XXXX.net
250-MX1.SPIDERHOST.COM Hello server.XXXX.net [XXX.XXX.XX.XX]
250-SIZE 10485760
250-PIPELINING
250-AUTH LOGIN
250 HELP
|
The problem there is that your SMPT server does not reply with
250 OK
which my server does. So elogd was waiting 3 seconds for "OK", and then aborted. I change the code (now in SVN revision 1871) to look for "250 " (with one blank at the end). You have to update from SVN, recompile and try again. Anyhow elogd only supports plain login authentication ("AUTH LOGIN"), which not all SMPT servers accept. You have to see. |
2274
|
Fri Jun 29 16:14:16 2007 |
| JJ Sheppard | jsheppard@tracstar.net | Question | Linux | 2.6.5 | Re: Error sending Email via "XXX.XXX.XXX.XXX" |
Stefan Ritt wrote: |
JJ Sheppard wrote: | 220 Welcome to the @Mail v4.4 SMTP Server ( Exim )
EHLO server.XXXX.net
250-MX1.SPIDERHOST.COM Hello server.XXXX.net [XXX.XXX.XX.XX]
250-SIZE 10485760
250-PIPELINING
250-AUTH LOGIN
250 HELP
|
The problem there is that your SMPT server does not reply with
250 OK
which my server does. So elogd was waiting 3 seconds for "OK", and then aborted. I change the code (now in SVN revision 1871) to look for "250 " (with one blank at the end). You have to update from SVN, recompile and try again. Anyhow elogd only supports plain login authentication ("AUTH LOGIN"), which not all SMPT servers accept. You have to see. |
This is what I get now, Is this the Auth Login problem you were speaking of?
Email from elog@XXXXX.net to jsheppard@XXXXX.net, SMTP host XXX.XXX.XXX.XXX:
220-server.XXXXXX.net ESMTP Exim 4.66 #1 Fri, 29 Jun 2007 10:03:22 -0400
220-We do not authorize the use of this system to transport unsolicited,
220 and/or bulk e-mail.
EHLO server.tracstar.net
250-server.tracstar.net Hello server.XXXXXX.net [XXX.XXX.XXX.XXX]
250-SIZE 52428800
250-PIPELINING
250-AUTH PLAIN LOGIN
250-STARTTLS
250 HELP
AUTH LOGIN
Username:
XXXXXXXX
Password:
XXXXXXXX
535 Incorrect authentication data
==== Return ================================
HTTP/1.1 302 Found |
2275
|
Fri Jun 29 16:16:58 2007 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | 2.6.5 | Re: Error sending Email via "XXX.XXX.XXX.XXX" |
JJ Sheppard wrote: | This is what I get now, Is this the Auth Login problem you were speaking of?
Email from elog@XXXXX.net to jsheppard@XXXXX.net, SMTP host XXX.XXX.XXX.XXX:
220-server.XXXXXX.net ESMTP Exim 4.66 #1 Fri, 29 Jun 2007 10:03:22 -0400
220-We do not authorize the use of this system to transport unsolicited,
220 and/or bulk e-mail.
EHLO server.tracstar.net
250-server.tracstar.net Hello server.XXXXXX.net [XXX.XXX.XXX.XXX]
250-SIZE 52428800
250-PIPELINING
250-AUTH PLAIN LOGIN
250-STARTTLS
250 HELP
AUTH LOGIN
Username:
XXXXXXXX
Password:
XXXXXXXX
535 Incorrect authentication data
|
No. It looks like PLAIN LOGIN is supported, but your username/password is wrong. Ask your SMPT system administrator. |
2276
|
Fri Jun 29 16:30:46 2007 |
| JJ Sheppard | jsheppard@tracstar.net | Question | Linux | 2.6.5 | Re: Error sending Email via "XXX.XXX.XXX.XXX" |
Stefan Ritt wrote: |
JJ Sheppard wrote: | This is what I get now, Is this the Auth Login problem you were speaking of?
Email from elog@XXXXX.net to jsheppard@XXXXX.net, SMTP host XXX.XXX.XXX.XXX:
220-server.XXXXXX.net ESMTP Exim 4.66 #1 Fri, 29 Jun 2007 10:03:22 -0400
220-We do not authorize the use of this system to transport unsolicited,
220 and/or bulk e-mail.
EHLO server.tracstar.net
250-server.tracstar.net Hello server.XXXXXX.net [XXX.XXX.XXX.XXX]
250-SIZE 52428800
250-PIPELINING
250-AUTH PLAIN LOGIN
250-STARTTLS
250 HELP
AUTH LOGIN
Username:
XXXXXXXX
Password:
XXXXXXXX
535 Incorrect authentication data
|
No. It looks like PLAIN LOGIN is supported, but your username/password is wrong. Ask your SMPT system administrator. |
I dubbed checked it and ran the -t command to make sure it was the right password. Any thing else I can try?
This is whats in the global
SMTP host = XXX.XX.XX.XX
SMTP username = advservices@XXXXX.XXX
SMTP Password = dDE5ODQ=
Use Email From = advservices@XXXX.XXX
and i still get this
250 HELP
AUTH LOGIN
Username:
XXXXX
Password:
XXXXX
535 Incorrect authentication data |