> Hi Stefan,
> 
> I've been slowly moving threads, and twice now so far (and reproducably) had elog crash.
> 
> In each case, it is trying to move a thread with more than 24 entries; it copies the first 24 entries, then
> crashes with "Segmentation Fault".  It does not erase the lock file /var/run/elog.pid
> 
> I have got around this by manually copying the entries beyond no 24, then deleting the thread entry by entry.
> 
> I am aware that I have an old and limited machine (586, 256MB RAM, running Slack 10), and at first I was
> "content" to write it off as that; but when it crashed for the second time at exactly the same entry (the
> twenty-forth) even though the size of the entries would have been significantly different, I wondered if there
> was some factor within  elog that could affect this.
> 
> I've not tried it with Copy to:, but imagine it will also be affected as the only difference with this and Move
> to: is the deletion of the thread after all the entries had been copied.

This rings a bell: it's probably related to some internal stack overflow, since the entries are copied 
recursively. I have an idea on how to fix that, but I need time for that.

> > Hi Stefan,
> > 
> > I've been slowly moving threads, and twice now so far (and reproducably) had elog crash.
> > 
> > In each case, it is trying to move a thread with more than 24 entries; it copies the first 24 entries, then
> > crashes with "Segmentation Fault".  It does not erase the lock file /var/run/elog.pid
> > 
> > I have got around this by manually copying the entries beyond no 24, then deleting the thread entry by entry.
> > 
> > I am aware that I have an old and limited machine (586, 256MB RAM, running Slack 10), and at first I was
> > "content" to write it off as that; but when it crashed for the second time at exactly the same entry (the
> > twenty-forth) even though the size of the entries would have been significantly different, I wondered if there
> > was some factor within  elog that could affect this.
> > 
> > I've not tried it with Copy to:, but imagine it will also be affected as the only difference with this and Move
> > to: is the deletion of the thread after all the entries had been copied.
> 
> This rings a bell: it's probably related to some internal stack overflow, since the entries are copied 
> recursively. I have an idea on how to fix that, but I need time for that.
Thanks Stefan,  I'll be keeping an eye out on any annoucement about this one!

> Hi Stefan,
> 
> I've been slowly moving threads, and twice now so far (and reproducably) had elog crash.
> 
> In each case, it is trying to move a thread with more than 24 entries; it copies the first 24 entries, then
> crashes with "Segmentation Fault".  It does not erase the lock file /var/run/elog.pid
> 
> I have got around this by manually copying the entries beyond no 24, then deleting the thread entry by entry.
> 
> I am aware that I have an old and limited machine (586, 256MB RAM, running Slack 10), and at first I was
> "content" to write it off as that; but when it crashed for the second time at exactly the same entry (the
> twenty-forth) even though the size of the entries would have been significantly different, I wondered if there
> was some factor within  elog that could affect this.
> 
> I've not tried it with Copy to:, but imagine it will also be affected as the only difference with this and Move
> to: is the deletion of the thread after all the entries had been copied.

I reworked the internal memory allocation, since there was a stack overflow going over 24 entries. It should be now 
much better. Give a try to revision 2226.

We have been running elog for a couple of years now and this morning it stopped working.

We have tried to rstart it and it says successful start but still does not run, when doing a restart it says stop failed start success.

Does anyone have any ideas.

thanks

You shoudl start elogd interactively in a DOS box to see if there is any error. Maybe disk full or a network problem... 

 It is running on a linux box, we have started in it in a telnet session, and no errors appear, as I am new to e-log is there an error log anywhere.

 Have fixed this by removing the last added user from the Passwd file.

 Have fixed this by removing the last added user from the Passwd file.