| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
2266
|
Thu Jun 28 17:12:11 2007 |
 | Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | 2.6.5 | Re: Error sending Email via "XXX.XXX.XXX.XXX" |
| JJ Sheppard wrote: | 220 Welcome to the @Mail v4.4 SMTP Server ( Exim )
EHLO server.XXXX.net
250-MX1.SPIDERHOST.COM Hello server.XXXX.net [XXX.XXX.XX.XX]
250-SIZE 10485760
250-PIPELINING
250-AUTH LOGIN
250 HELP
|
The problem there is that your SMPT server does not reply with
250 OK
which my server does. So elogd was waiting 3 seconds for "OK", and then aborted. I change the code (now in SVN revision 1871) to look for "250 " (with one blank at the end). You have to update from SVN, recompile and try again. Anyhow elogd only supports plain login authentication ("AUTH LOGIN"), which not all SMPT servers accept. You have to see. |
|
2265
|
Thu Jun 28 17:08:32 2007 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | | 2.6.5-1870 | Re: How to change elog directories in windows |
| toumbi wrote: | Hi stephan , I remove elog and setup it again wiht the nis installer, and enter Z:\ELOG\ which is a mapping drive of my server directorie.
but it dont work. i have an error code 3 when i register the services with the shortcut "Register ELOG server service" . |
If you see the service config page, then the service is already registered, and you should not use the shortcut "Register ELOG server service" any more. Just change "Startup type" to "Automatic" or "Manual" and click on the "Start" button. |
|
2264
|
Thu Jun 28 17:05:56 2007 |
| toumbi | toumbi@yopmail.com | Question | | 2.6.5-1870 | Re: How to change elog directories in windows |
| Stefan Ritt wrote: |
| toumbi wrote: | Hi , I need an example for windows directories syntax.
I would like to start elog in windows xp from a server directories "\\myserver\elog\" for example and/or "G:\elog\"
I want my elogd.cfg be on this server and not on my local hard drive.
also I would like the windows service start automatically from "\\myserver\elog\" or "G:\elog\"
thank you for your help. |
If you go to Computer Management, click on Services, double click on ELOG, you will see "Path to executable". Either you move elogd.exe to d:\elog and start it there, or you start elogd with the "-c" flag, which specifies the location of the config file, such as
...\elogd.exe -c g:\elog\elogd.cfg
I have to warn you however that sometimes I personally had kind of poor network connection to a Windows server, so the reply time of elog was many seconds. |
Hi stephan , I remove elog and setup it again wiht the nis installer, and enter Z:\ELOG\ which is a mapping drive of my server directorie.
but it dont work. i have an error code 3 when i register the services with the shortcut "Register ELOG server service" . |
|
2263
|
Thu Jun 28 15:24:31 2007 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | | 2.6.5-1870 | Re: How to change elog directories in windows |
| toumbi wrote: | Hi , I need an example for windows directories syntax.
I would like to start elog in windows xp from a server directories "\\myserver\elog\" for example and/or "G:\elog\"
I want my elogd.cfg be on this server and not on my local hard drive.
also I would like the windows service start automatically from "\\myserver\elog\" or "G:\elog\"
thank you for your help. |
If you go to Computer Management, click on Services, double click on ELOG, you will see "Path to executable". Either you move elogd.exe to d:\elog and start it there, or you start elogd with the "-c" flag, which specifies the location of the config file, such as
...\elogd.exe -c g:\elog\elogd.cfg
I have to warn you however that sometimes I personally had kind of poor network connection to a Windows server, so the reply time of elog was many seconds. |
|
2262
|
Thu Jun 28 15:20:06 2007 |
 | toumbi | toumbi@yopmail.com | Question | | 2.6.5-1870 | How to change elog directories in windows |
Hi , I need an example for windows directories syntax.
I would like to start elog in windows xp from a server directories "\\myserver\elog\" for example and/or "G:\elog\"
I want my elogd.cfg be on this server and not on my local hard drive.
also I would like the windows service start automatically from "\\myserver\elog\" or "G:\elog\"
thank you for your help. |
|
2261
|
Wed Jun 27 22:01:56 2007 |
| JJ Sheppard | jsheppard@tracstar.net | Question | Linux | 2.6.5 | Error sending Email via "XXX.XXX.XXX.XXX" |
I read most of the posts and used the -v to see whats happening, all i get is this. It hangs at the "250 HELP" line for about 3 secs then moves on to what is displayed. From the posts it looks like there should be alot more info to see. Any idea on how to get it to display right?
I have telneted into the mail server and tested it, so i know its working that way.
-----------------------------11323166884439--
Email "Case Holder" JJ to jsheppard@XXXX.net
timezone: 18000, offset: -14400
Email from advservices@XXXX.net to jsheppard@XXXX.net, SMTP host XXX.XXX.XXX.XXX:
220 Welcome to the @Mail v4.4 SMTP Server ( Exim )
EHLO server.XXXX.net
250-MX1.SPIDERHOST.COM Hello server.XXXX.net [XXX.XXX.XX.XX]
250-SIZE 10485760
250-PIPELINING
250-AUTH LOGIN
250 HELP
==== Return ================================
HTTP/1.1 302 Found
Server: ELOG HTTP 2.6.5-1844
Connection: Keep-Alive
Keep-Alive: timeout=60, max=10
Location: http://XXX.XXX.XXX.XXX:8080/2WaySupport/1?error=Error+sending+Email+via+<i>"XXX.XXX.XXX.XXX"</i>
Content-Length: 20 |
|
2260
|
Wed Jun 27 19:51:39 2007 |
| toumbi | toumbi@yopmail.com | Bug report | Windows | 2.6.5-1855 | Re: formating bug : css and Format command |
| Stefan Ritt wrote: |
| toumbi wrote: | | ok so if you say it is not a bug i can understand but in that case the format command work half in the entry form. Is it possible to implement it for the next time? |
Yes I will do that. |
Thank you , I download and compile myself elogd and it work now.
But I found a line one the french language that make javascritp bug
line 391:
Enter heading level (1, 2 or 3) = Indiquez le niveau d'en-tête (1, 2 ou 3)
=> linkHeading_prompt = 'Indiquez le niveau d'en-tête (1, 2 ou 3)'; there is one more '
my french is better than my english so i can say it is a good translation but the symbole between the letter d and the letter e make exporer 7 bug.
Enter heading level (1, 2 or 3) = Indiquez le niveau d en-tête (1, 2 ou 3) (this work but translation isn't good.
Thanks a lot ! and continue it is a beautiful tool. |
|
2259
|
Wed Jun 27 16:15:04 2007 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Windows | 2.6.5-1855 | Re: formating bug : css and Format command |
| toumbi wrote: | | ok so if you say it is not a bug i can understand but in that case the format command work half in the entry form. Is it possible to implement it for the next time? |
Yes I will do that. |