Re: Access to global configuration in v2.6.1, posted by Giorgio Croci Candiani on Wed Jan 25 12:08:13 2006
|
> I tried again, using the configuration file from the distribution (elog:1627/1). Hitting "config", I see the picture
> attached (elog:1627/2). So it's a mystery why it is different in your case...
Indeed... I peeked into the code, and I got the feeling it could be a matter of incorrect user setup (though I have no
users/authorizations defined at all) or maybe browser cookies. A thin trail, but I'll try some debug directly on the
code and, should I come up with something, I'll surely notice you.
Thanks for your support! |
|
Re: Access to global configuration in v2.6.1, posted by Stefan Ritt on Wed Jan 25 12:10:46 2006
|
> or maybe browser cookies.
That rings a bell. If you change user permissions (like password file/no password file/rename logbooks) you might be
fooled by old cookies. Just delete all cookies in your browser and try again. |
|
Re: Suggestion additional ElCodes, posted by T. Ribbrock on Wed Jan 25 12:31:14 2006
|
| Stefan Ritt wrote: |
Yes, I missed tables myself already. The headings I just put into the current SVN version (see this forum for how it works).
|
Very nice, thanks! I'm a bit torn as to whether I like the way I have to enter the level by keyboard or whether I'd rather see something like with the smileys (i.e. some "level menu" opens once "H" is pressed). The former is faster, while the latter doesn't require moving between the mouse and the keyboard. But that's just a detail - not really that important.
| Stefan Ritt wrote: | Tables are a bit harder to implement and will come later. Do you have a proposal for a possible syntax?
[...]
Maybe somehting like
|
| heading 1 | heading 2 | heading 3
| |
| data 1 | data 2 | data 3
|
this looks a bit like the "pipe" mode from a Wiki
what do you think? |
Yup, I remember using that kind of "pipe" structure in Wikis and I actually liked it. I think it's a lot easier to read in the "source" as well - and it reminds me remotely of LaTeX...  Also, it doesn't require much to just type it out instead of using buttons to make the cells. Definitely good enough for the simple type of tables I had in mind! |
Running ELOG under Apache, posted by Dimitrios Tsirigkas on Mon Jan 30 11:41:18 2006
|
Hi,
Sorry if this has been asked elsewhere and I'm missing it. I want to stop users from accessing my elog by loading the URL: http://mycomputerURL:8080 and only make it accessible through http://mycomputerURL/elog. The end goal would be to use Apache to control access. I followed the instructions under "Running elogd under Apache" in the admin guide, but what that did was simply to redirect browsers trying to load ttp://mycomputerURL/elog to http://mycomputerURL:8080.
Thanks,
Dimitris |
|
Re: Running ELOG under Apache, posted by Stefan Ritt on Mon Jan 30 12:27:08 2006
|
| Dimitrios Tsirigkas wrote: | | Sorry if this has been asked elsewhere and I'm missing it. I want to stop users from accessing my elog by loading the URL: http://mycomputerURL:8080 and only make it accessible through http://mycomputerURL/elog. The end goal would be to use Apache to control access. I followed the instructions under "Running elogd under Apache" in the admin guide, but what that did was simply to redirect browsers trying to load ttp://mycomputerURL/elog to http://mycomputerURL:8080. |
If you want to have user-level access control, you need to do that with the config option
Password file = ...
Then, if you have the
URL = http://mycomputerURL/elog
statement in your config file, you get redirected from elogd after each login automatically to that URL. If you physically want to block the 8080 port, you have to do that on the operating system level, like with iptables or ipchains. |
|
compiling elog 2.6.1 on solaris platform, posted by Angus Au on Thu Feb 2 03:19:44 2006
|
I came across problem in compiling elog 2.6.1 on solaris platform.
The messages "
# make
gcc -o elog src/elog.c -lutil -lsocket -lnsl
ld: fatal: library -lutil: not found
ld: fatal: File processing errors. No output written to elog
collect2: ld returned 1 exit status
*** Error code 1
make: Fatal error: Command failed for target `elog'
It seems to me that library libutil does not exist on solaris platform.
Is there any fix ? I can compile elog 2.6.0 successfully on solaris. |
[261] problem with month selection, posted by Willem Koster on Fri Feb 3 11:54:22 2006
|
I have several date-fields defined in my logboek. But when I click the icon and select another month the pop-up
window get's filled with the contants of the logboek instead of the date-selection.
Date format = %Y%m%d |
|
sort after find, posted by Willem Koster on Fri Feb 3 12:38:57 2006
|
When I do a find (like Field1 = XXX )
and then try to sort the results I get the entire list again (but sorted) instead of the sorted results.
But when I fabricate a url manually like
http://elog.com/Forum/?mode=summary&npp=990&Field1=XXX&sort=field2
I do get the search-results nicely sorted.
Obviously I would like to be able to sort the result of a find-query.
Is this a bug or a feature request ? |