Re: Conditional Email Notification by a text file, posted by An Thai on Fri Nov 3 01:03:33 2006
|
| Steve Jones wrote: |
| An Thai wrote: | Hello,
I try to email by using a email text file to reduce the admin work.
- MOptions Team = EUROPE, ASIA, AFRICA, AMERICA
- Email Team EUROPE = $shell(type C:\EuropeEmailList.txt)
but i get always Email sent to Shell execution not enabled via -x flag
Is this feature not supported by ELOG or did i use the wrong syntax?
Thank you in advance. |
| Quote: | | You need to start elogd with the "-x" flag |
|
Yes, i did it. But the problem is still there.
I exactly tried 50 times by submit a new entry and got only 3 times passed. 47 another cases i got:
"Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
I run elogd -v and see:
"Email Team EUROPE to Shell execution not enable via -x flag" |
|
Re: Conditional Email Notification by a text file, posted by Steve Jones on Fri Nov 3 03:42:18 2006
|
| An Thai wrote: |
| Steve Jones wrote: |
| An Thai wrote: | Hello,
I try to email by using a email text file to reduce the admin work.
- MOptions Team = EUROPE, ASIA, AFRICA, AMERICA
- Email Team EUROPE = $shell(type C:\EuropeEmailList.txt)
but i get always Email sent to Shell execution not enabled via -x flag
Is this feature not supported by ELOG or did i use the wrong syntax?
Thank you in advance. |
| Quote: | | You need to start elogd with the "-x" flag |
|
Yes, i did it. But the problem is still there.
I exactly tried 50 times by submit a new entry and got only 3 times passed. 47 another cases i got:
"Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
I run elogd -v and see:
"Email Team EUROPE to Shell execution not enable via -x flag" |
| Steve Jones wrote: |
Well, it looks like you are getting the text "Shell execution not enable via -x flag" put into the EUROPE attribute then the email server is attempting to send email to the email address "Shell execution not enable via -x flag", which is clearly not a valid address thus the "Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
You need to run run "elogd -v -x" then look for the errors. You also might try a more simpler test like "Preset Team EUROPE = = $shell(type C:\EuropeEmailList.txt)" and then see what is returned. It makes it simpler and removes the email error from the equation.
|
|
|
Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Thu Nov 9 20:45:32 2006
|
| Steve Jones wrote: |
| An Thai wrote: |
| Steve Jones wrote: |
| An Thai wrote: | Hello,
I try to email by using a email text file to reduce the admin work.
- MOptions Team = EUROPE, ASIA, AFRICA, AMERICA
- Email Team EUROPE = $shell(type C:\EuropeEmailList.txt)
but i get always Email sent to Shell execution not enabled via -x flag
Is this feature not supported by ELOG or did i use the wrong syntax?
Thank you in advance. |
| Quote: | | You need to start elogd with the "-x" flag |
|
Yes, i did it. But the problem is still there.
I exactly tried 50 times by submit a new entry and got only 3 times passed. 47 another cases i got:
"Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
I run elogd -v and see:
"Email Team EUROPE to Shell execution not enable via -x flag" |
| Steve Jones wrote: |
Well, it looks like you are getting the text "Shell execution not enable via -x flag" put into the EUROPE attribute then the email server is attempting to send email to the email address "Shell execution not enable via -x flag", which is clearly not a valid address thus the "Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
You need to run run "elogd -v -x" then look for the errors. You also might try a more simpler test like "Preset Team EUROPE = = $shell(type C:\EuropeEmailList.txt)" and then see what is returned. It makes it simpler and removes the email error from the equation.
|
|
That's a very interesting idea of setting up mailing lists I never thought about. I tried myself and it works fine. Just as Steve says run "elogd -v -x" to see what happens. Also make sure that EuropeEmailList.txt contains only a single line with comma-separated email addresses, just as you would enter them in the config file. |
|
Re: Conditional Email Notification by a text file, posted by An Thai on Thu Nov 9 23:25:15 2006
|
| Stefan Ritt wrote: |
| Steve Jones wrote: |
| An Thai wrote: |
| Steve Jones wrote: |
| An Thai wrote: | Hello,
I try to email by using a email text file to reduce the admin work.
- MOptions Team = EUROPE, ASIA, AFRICA, AMERICA
- Email Team EUROPE = $shell(type C:\EuropeEmailList.txt)
but i get always Email sent to Shell execution not enabled via -x flag
Is this feature not supported by ELOG or did i use the wrong syntax?
Thank you in advance. |
| Quote: | | You need to start elogd with the "-x" flag |
|
Yes, i did it. But the problem is still there.
I exactly tried 50 times by submit a new entry and got only 3 times passed. 47 another cases i got:
"Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
I run elogd -v and see:
"Email Team EUROPE to Shell execution not enable via -x flag" |
| Steve Jones wrote: |
Well, it looks like you are getting the text "Shell execution not enable via -x flag" put into the EUROPE attribute then the email server is attempting to send email to the email address "Shell execution not enable via -x flag", which is clearly not a valid address thus the "Error sending Email via "192.168.2.20": 5.5.2 Need Rcpt command".
You need to run run "elogd -v -x" then look for the errors. You also might try a more simpler test like "Preset Team EUROPE = = $shell(type C:\EuropeEmailList.txt)" and then see what is returned. It makes it simpler and removes the email error from the equation.
|
|
That's a very interesting idea of setting up mailing lists I never thought about. I tried myself and it works fine. Just as Steve says run "elogd -v -x" to see what happens. Also make sure that EuropeEmailList.txt contains only a single line with comma-separated email addresses, just as you would enter them in the config file. |
I tested many times and find out the problem.
The first opening CMD and running "elogd -v -x". It works perfektly.
Close the CMD: It stops to work.
From this time point it never works again even I try to re-open CMD and run "elogd -v -x"
The computer must be rebooted to get it works. (The CMD for running elogd -x must be always opened !!!) |
|
Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Fri Nov 10 07:51:59 2006
|
| An Thai wrote: | I tested many times and find out the problem.
The first opening CMD and running "elogd -v -x". It works perfektly.
Close the CMD: It stops to work.
From this time point it never works again even I try to re-open CMD and run "elogd -v -x"
The computer must be rebooted to get it works. (The CMD for running elogd -x must be always opened !!!) |
You probably run two servers in parallel. If you install the standard windows package, an elogd service is created and started. If you open a command window and run elogd manually, you have it running twice, and you never know to which instance your browser connects to. So first start the server with net stop elogd and then open the command window and start elogd manually. |
|
Re: Conditional Email Notification by a text file, posted by Grant Jeffcote on Sat Nov 11 06:56:16 2006
|
Stefan, this is a great idea (thanks An).
I can't seem to get this working when Elogd is started as a service though?
Starting elogd (-x) manually works fine and with the -v switch I can see it is operating correctly but obviously the service option is preferred.
The service ("D:\ELOG\elogd.exe" -x -D -c "D:\ELOG\elogd.cfg") is starting correctly using the -x switch (as I use the shell command for other elog options) but it doesn't seem to send the mail.
Is this a 'feature' ;o)
Thx
| Stefan Ritt wrote: |
| An Thai wrote: | I tested many times and find out the problem.
The first opening CMD and running "elogd -v -x". It works perfektly.
Close the CMD: It stops to work.
From this time point it never works again even I try to re-open CMD and run "elogd -v -x"
The computer must be rebooted to get it works. (The CMD for running elogd -x must be always opened !!!) |
You probably run two servers in parallel. If you install the standard windows package, an elogd service is created and started. If you open a command window and run elogd manually, you have it running twice, and you never know to which instance your browser connects to. So first start the server with net stop elogd and then open the command window and start elogd manually. |
|
|
Re: Conditional Email Notification by a text file, posted by Stefan Ritt on Sat Nov 11 18:36:44 2006
|
| Grant Jeffcote wrote: | I can't seem to get this working when Elogd is started as a service though?
Starting elogd (-x) manually works fine and with the -v switch I can see it is operating correctly but obviously the service option is preferred.
The service ("D:\ELOG\elogd.exe" -x -D -c "D:\ELOG\elogd.cfg") is starting correctly using the -x switch (as I use the shell command for other elog options) but it doesn't seem to send the mail.
Is this a 'feature' ;o) |
Sure 
But seriously, elogd cannot be started as a service under windows by opening a command window and executing above command line. Under windows, it has to be installed and run as a service, which is usually done by the installer. To change it, you do that by selecting My Computer, then right mouse click and Manage, then you select Serviced and Applications, then Services, then you will see the elogd service. A double click on it opens the corresponding properties, where you will find the command line, usually
"C:\Program Files\ELOG\elogd.exe" -D -c "C:\Program Files\ELOG\elogd.cfg"
Here you have to change the command line parameters to add the -x flag. Then you stop and restart the service. |
|
Re: Conditional Email Notification by a text file, posted by Grant Jeffcote on Sat Nov 11 18:48:48 2006
|
Thanks Stefan,
I understand that and the registry entry that I use (for the service) is what I had quoted below.
The problem I have is that when Elog is started as a service using the -x switch then the shell command using An's mail list suggestion does not work? Starting the elogd daemon manually (ie using the command prompt) does work.
I have other features within my configuration which use the 'execute new $shell' option which works perfectly so I know that the -x switch is functional within the service.
BR Grant
| Stefan Ritt wrote: |
| Grant Jeffcote wrote: | I can't seem to get this working when Elogd is started as a service though?
Starting elogd (-x) manually works fine and with the -v switch I can see it is operating correctly but obviously the service option is preferred.
The service ("D:\ELOG\elogd.exe" -x -D -c "D:\ELOG\elogd.cfg") is starting correctly using the -x switch (as I use the shell command for other elog options) but it doesn't seem to send the mail.
Is this a 'feature' ;o) |
Sure
But seriously, elogd cannot be started as a service under windows by opening a command window and executing above command line. Under windows, it has to be installed and run as a service, which is usually done by the installer. To change it, you do that by selecting My Computer, then right mouse click and Manage, then you select Serviced and Applications, then Services, then you will see the elogd service. A double click on it opens the corresponding properties, where you will find the command line, usually
"C:\Program Files\ELOG\elogd.exe" -D -c "C:\Program Files\ELOG\elogd.cfg"
Here you have to change the command line parameters to add the -x flag. Then you stop and restart the service. |
|
|