Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 609 of 808  Not logged in ELOG logo
    icon4.gif   Re: Cancel button missing when editing an entry, posted by Grant Jeffcote on Wed Nov 16 17:12:40 2016 
Andreas,

Doesn't using the Save Drafts = 0 option result in the old 'Back' button returning (replacing the Delete option) meaning
you can revert back to your old (unmodified) version without saving, sure it doesn't save a draft but I'd rather be able to return back and lose
    icon2.gif   Re: Cancel button missing when editing an entry, posted by Andreas Luedeke on Thu Nov 17 09:14:15 2016 
Yes, "Save Drafts = 0" does the trick. But it is the "zero-option": trivial, but not satisfying ;-)

Warning: the "back" button of the browser has a very undesired effect: the entry
is then converted into a draft and not shown anymore in list view!
    icon2.gif   Re: Cancel button missing when editing an entry, posted by Stefan Ritt on Mon Nov 21 15:07:05 2016 
Well, the "undesired effect" you describe is exactly the reason for having drafts. Somebody works on a lengthy message, then the browser dies,
or the user by accident hits the "back" button and (by accidnt, ehem...) confirms the dialog popping up which says "changes will be lost".
In that case the draft mechanism should take care of that the lengthy message is not lost. That's where it is for. If one does not like it, one can
    icon2.gif   Re: Cancel button missing when editing an entry, posted by Christine Quicot on Wed Nov 23 09:25:15 2016 
Hello,

In my opinion, there should be a "close/return" button (discard changes), even with the drafts enabled, but effectively there will
have to be several saves made (at least before/after).
    icon2.gif   Re: Cancel button missing when editing an entry, posted by Andreas Luedeke on Thu Nov 24 07:38:52 2016 
Hi Stefan,

actually what you refer to as the "quick and dirty" solution is probably the only feasible one: to store a copy
of the entry in the browser and restore that copy with a "cancel" button.

Otherwise you would need a full-fledged revision management,
to deal with multiple copies of the same entry open in several browsers.

 

Yet, that does not solve the "problem"
    icon2.gif   Re: Cancel button missing when editing an entry, posted by Stefan Ritt on Thu Nov 24 08:40:31 2016 



Andreas Luedeke
wrote:



But as a first step, it might be worthwhile to document this behaviour
in the ELOG "User's Guide". Drafts are currently only mentioned in the elogd.cfg syntax pages under "Save drafts" and "autosave".
    icon2.gif   Re: Can't use the command-line client, posted by Stefan Ritt on Wed Mar 16 22:14:19 2005 
> There is a read password ("Read Password=..." entry in elogd.cfg) on
> the logbook which I cannot bypass from the client.
    icon7.gif   Re: Can't use the command-line client, posted by Pieter Edelman on Thu Mar 17 09:56:21 2005 
This solved the problems, thanks for the fast response!

On a side note, one would expect that when "Fixed Attributes Edit" or "Fixed Attributes
ELOG V3.1.5-3fb85fa6