Re: Can I turn off emoticons?, posted by Stefan Ritt on Wed Sep 21 09:06:03 2005
|
| Dan Chitwood wrote: | Is there a way to not use the emoticons, but at the same time use the ELCode?
An example would be to add a slash before the emoticon code like this: /:)
Thanks,
Dan |
There are two ways:
a) put a "\" in front of the emoticon like this: \:) -> :)
b) put a [code] tag around your text. Any text inside the [code] tag is not interpretet like:
[code]Hello ;) [I]italics[/i] [/code]
note that the trick with the "\" only works in the current CVS version of elog. |
|
Re: Can I host elog in the web under windows platform without Apache Web Server?, posted by Stefan Ritt on Fri Jan 15 08:04:09 2016
|
When you install elog under windows, an example config file gets installed which lets you do already what you want. Then you can extend the config file according to the documentation https://midas.psi.ch/elog/config.html
| Dawang wrote: |
|
Hi All,
Can I host elog in the web (internet) under windows platform (elogd.exe only) without Apache Web Server? If possible, what syntax should I add in the configuration file? Appreciate feedback. Thanks.
Cheers,
Raymund
|
|
Re: Can I host elog in the web under windows platform without Apache Web Server?, posted by Andreas Luedeke on Fri Jan 15 15:31:54 2016
|
I admit that I'm not sure if I understood the question. It is quite some work to do the opposite, to run elog behind an Apache Web Server.
But if you just install ELOG out of the box it will always run without an Apache Web Server. You don't need to add anything in the config file for that.
| Dawang wrote: |
|
Hi All,
Can I host elog in the web (internet) under windows platform (elogd.exe only) without Apache Web Server? If possible, what syntax should I add in the configuration file? Appreciate feedback. Thanks.
Cheers,
Raymund
|
|
|
Re: Can I host elog in the web under windows platform without Apache Web Server?, posted by Dawang on Fri Jan 29 05:38:03 2016
|
Thanks Andreas and Stefan,
Since I'm not good in setting up webserver, do you know a web hosting company that can I use to integrate elog so that i can access my elog publicly same as you are using here? Thanks.
BR,
Raymund
| Andreas Luedeke wrote: |
|
I admit that I'm not sure if I understood the question. It is quite some work to do the opposite, to run elog behind an Apache Web Server.
But if you just install ELOG out of the box it will always run without an Apache Web Server. You don't need to add anything in the config file for that.
| Dawang wrote: |
|
Hi All,
Can I host elog in the web (internet) under windows platform (elogd.exe only) without Apache Web Server? If possible, what syntax should I add in the configuration file? Appreciate feedback. Thanks.
Cheers,
Raymund
|
|
|
|
Re: Can I host elog in the web under windows platform without Apache Web Server?, posted by Andreas Luedeke on Fri Jan 29 06:35:05 2016
|
Can't help you with that, and I think it is the wrong forum to ask that question.
You'll need a web service provider that will allow you to run your own services.
And then it'll either require some skills in host administration or a full host service by the provider.
Cheers, Andreas
| Dawang wrote: |
|
Thanks Andreas and Stefan,
Since I'm not good in setting up webserver, do you know a web hosting company that can I use to integrate elog so that i can access my elog publicly same as you are using here? Thanks.
BR,
Raymund
| Andreas Luedeke wrote: |
|
I admit that I'm not sure if I understood the question. It is quite some work to do the opposite, to run elog behind an Apache Web Server.
But if you just install ELOG out of the box it will always run without an Apache Web Server. You don't need to add anything in the config file for that.
| Dawang wrote: |
|
Hi All,
Can I host elog in the web (internet) under windows platform (elogd.exe only) without Apache Web Server? If possible, what syntax should I add in the configuration file? Appreciate feedback. Thanks.
Cheers,
Raymund
|
|
|
|
|
Re: Can Elog make a table?, posted by Stefan Ritt on Thu Aug 8 09:07:45 2024
|
I'm not exactly sure what you want to do, but there are two options in elog:
1) Insert directly a table like this one:
| Index |
Value |
| first |
123 |
| second |
432 |
2) Use one ELOG entry as a row in a table. You can try this by clicking on "List" here in the Forum should you not already see the list display, then on "Summary" which give you a spreadsheet like display, where you can specify in the config file which columns of the ELOG entries you want to see. See also the demo here: https://elog.psi.ch/elogs/Linux+Demo/
Best,
Stefan |
|
Re: Calculations & Interfacing a DataBase with Elog., posted by Stefan Ritt on Sat Jun 22 10:07:08 2019
|
Yes elog stores data in a flat file database. Go to your logbook directory and look for files YYMMDDa.log where you find all data. Some people do a post submit call to scripts, other integrate JS directly on each page (e.g. via "bottom text" option where you can load a whole JavaScript file), then pick the fields and do calculations directly in the edit window.
Stefan
| John wrote: |
|
Hi, I am trying to calculate two or more Elog fields and then return the value to Elog. I am currently learning Perl to do this. I realize JS can do this.. but so can IBM Basic ;) I am savy with other db techniques like sql. My question is before I get too far along with this project, is it safe to say the current storage of Elog data is 'Flat File' database? I also want to find out if it would be better to try and grab the data prior OR after it gets into the Elog database. I see there are other forum messages related to sql interfacing and such, but nothing conclusive. I will submit my personal progress here. Thanks again, John
|
|
|
Re: Calculations & Interfacing a DataBase with Elog., posted by John on Sat Jun 22 10:21:39 2019
|
Thanks Stefan soo much. As I've said, I will update this post(s) as I make any progress :)
John
| Stefan Ritt wrote: |
|
Yes elog stores data in a flat file database. Go to your logbook directory and look for files YYMMDDa.log where you find all data. Some people do a post submit call to scripts, other integrate JS directly on each page (e.g. via "bottom text" option where you can load a whole JavaScript file), then pick the fields and do calculations directly in the edit window.
Stefan
| John wrote: |
|
Hi, I am trying to calculate two or more Elog fields and then return the value to Elog. I am currently learning Perl to do this. I realize JS can do this.. but so can IBM Basic ;) I am savy with other db techniques like sql. My question is before I get too far along with this project, is it safe to say the current storage of Elog data is 'Flat File' database? I also want to find out if it would be better to try and grab the data prior OR after it gets into the Elog database. I see there are other forum messages related to sql interfacing and such, but nothing conclusive. I will submit my personal progress here. Thanks again, John
|
|
|