ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
1507
|
Tue Nov 15 08:40:31 2005 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Linux | 2.6.0-4 | Re: page2?cmd=List does not show next page |
Oleg Solovyanov wrote: | Maybe I'm doing something wrong, but the following does not work on a Elog with multiple pages:
1. View message
2. Click List
3. Click Next or page number
4. Only the last page is shown
It looks like the URL pageN?cmd=List does not work, while pageN works.
Any hints?
Same behaviour can be seen also with Discussion forum on Elog site. |
I don't understand. I tried on the Discussion forum:
1. View message, for example http://midas.psi.ch/elogs/Forum/1506
2. Click List, which takes me to http://midas.psi.ch/elogs/Forum/
3. Click Next, which takes me to http://midas.psi.ch/elogs/Forum/page2
Then I really see page2, not the last page. So what do you do differently? |
1506
|
Tue Nov 15 08:35:33 2005 |
| Oleg Solovyanov | Oleg.Solovyanov@ihep.ru | Bug report | Linux | 2.6.0-4 | page2?cmd=List does not show next page |
Maybe I'm doing something wrong, but the following does not work on a Elog with multiple pages:
1. View message
2. Click List
3. Click Next or page number
4. Only the last page is shown
It looks like the URL pageN?cmd=List does not work, while pageN works.
Any hints?
Same behaviour can be seen also with Discussion forum on Elog site. |
1505
|
Tue Nov 8 08:17:22 2005 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | 2.6.0 | Re: Problems with ELOG and Internet Explorer |
Elaine Cristina Franchini dos Anjos wrote: | I edited and used preview many times and the ELOG worked fine without errors in IE. So, I think my problem is something configured in the proxy or https that Internet Explorer doesn't work very well in this circumstance. |
Have a look at your URL = ... statement in elogd.cfg
It should probably read
URL = https://antares.ccuec.unicamp.br:9696
ELOG uses redirection internally. To determine it's own address, it uses the URL statement. If you use Apache as an proxy together with https, you have to specify the URL under which you usually access ELOG from outside. If this is wrong, ELOG might try to redirect to http:// or something which might not be possible.
A good way to debug this is to run ELOG with the -v flag and carefully watch the HTTP traffic. You will see Location: ... statements which redirect the browser, then the browser will access the redirected URL (if it's correct), or you will see nothing (in case the browser tries to access a non-existing URL). |
1504
|
Mon Nov 7 18:55:57 2005 |
| Elaine Cristina Franchini dos Anjos | elaine@ccuec.unicamp.br | Question | Linux | 2.6.0 | Re: Problems with ELOG and Internet Explorer |
Hi Stefan,
Quote: |
I tried on this forum with Internet Explorer 6.0 and could not reproduce the problem, and I never heared anybody else mentioning this problem. Can you reproduce the problem on the forum |
I couldn't reproduce the problem in this forum too, and I'm using Internet Explorer to edit this entry now... :-D
I did some new tests and at this time I tried to submit new entries using the ELOG default port
without proxy, because I realized that this Forum doesn't use https (maybe uses proxy).
I edited and used preview many times and the ELOG worked fine without errors in IE.
So, I think my problem is something configured in the proxy or https that Internet Explorer
doesn't work very well in this circumstance.
Do you know problems like this ?
Is there anybody else using ELOG under https ?
My proxy configuration :
Quote: |
1) http (default port 80):
# Redirect to ELOG - Logbook
Redirect permanent /elog https://antares.ccuec.unicamp.br:9696
2) https (I need to use other different port number) :
<VirtualHost 143.106.80.30:9696>
# Here be standard configuration for the Virtual Host
ServerName antares.ccuec.unicamp.br:9696
ServerAdmin suporte@ccuec.unicamp.br
# This be the path to the elog directory
# (This didn't seem to make any difference, but it be a good
# idea nonetheless)
DocumentRoot "/www/elog"
# Here be the setup for the SSL component of the Virtual Host
SSLEngine On
SSLCertificateFile /www/apache/conf/ssl.crt/server.crt
SSLCertificateKeyFile /www/apache/conf/ssl.key/server.key
# Here be the setup options for the Proxy module
ProxyRequests Off
ProxyPreserveHost On
# This be the root of the new Virtual Host, and it should be
# redirected to the port the elogd server is listening to
# (8081 on our poop deck).
<Location />
<Location />
ProxyPass http://antares.ccuec.unicamp.br:8081/
ProxyPassReverse http://antares.ccuec.unicamp.br:8081/
SSLRequireSSL
</Location>
ErrorLog /www/apache/logs/error_log
TransferLog /www/apache/logs/access_log </VirtualHost> |
Thanks in advance.
Elaine |
1503
|
Mon Nov 7 09:25:59 2005 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Windows | 2.6.0beta5 | Re: ELOG v2.6.0-beta5 (Windows) crashes while using " Forgot password?" |
Edmundo T Rodriguez wrote: | The following ELOG behavior seems to be like a bug ...
-> Anybody click on "Forgot password?" in the login screen, to have the system
send him the forgotten password, and after a little while trying, (possibly doing
resolution) the ELOG application crashes.
The ELOG service have to registered again.
The SMPT host may not be right, but ELOG should not crash just for that.
It should says something like "Can not find SMTP server", etc. |
I have fixed that in SVN revision 1541. |
1502
|
Mon Nov 7 09:16:47 2005 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Linux | 2.6.0 | Re: Problems with ELOG and Internet Explorer |
Elaine Cristina Franchini dos Anjos wrote: | We are facing a problem when using the Internet Explorer browser to edit
logbooks entries. The error occurs when we use the preview option.
After this, the connection becomes slow to display the preview and returns
"Server Not Found - Page cannot be displayed" or "Internal Server error" as result.
If we try to turn back to the edit page the browser retuns
"This page has been expired".
It happens at any time even we edit simple entries in Internet Explorer,
but never occurs in other browsers.
Software versions that are running :
Elog version 2.6.0-beta
Fedora Core release 1 (Yarrow)
Apache/2.0.54 (Unix) mod_ssl/2.0.54 OpenSSL/0.9.7g
(Elog is running under apache proxy)
Is there any bug report about this or there is something else
that I need to configure ? |
I tried on this forum with Internet Explorer 6.0 and could not reproduce the problem, and I never heared anybody else mentioning this problem. Can you reproduce the problem on the forum? |
1501
|
Fri Nov 4 16:51:32 2005 |
| Elaine Cristina Franchini dos Anjos | elaine@ccuec.unicamp.br | Question | Linux | 2.6.0 | Problems with ELOG and Internet Explorer |
Hi,
We are facing a problem when using the Internet Explorer browser to edit
logbooks entries. The error occurs when we use the preview option.
After this, the connection becomes slow to display the preview and returns
"Server Not Found - Page cannot be displayed" or "Internal Server error" as result.
If we try to turn back to the edit page the browser retuns
"This page has been expired".
It happens at any time even we edit simple entries in Internet Explorer,
but never occurs in other browsers.
Software versions that are running :
Elog version 2.6.0-beta
Fedora Core release 1 (Yarrow)
Apache/2.0.54 (Unix) mod_ssl/2.0.54 OpenSSL/0.9.7g
(Elog is running under apache proxy)
Is there any bug report about this or there is something else
that I need to configure ?
Thanks in advance.
Elaine |
1500
|
Thu Nov 3 23:39:46 2005 |
| Edmundo T Rodriguez | edrodrig@chpnet.org | Bug report | Windows | 2.6.0beta5 | ELOG v2.6.0-beta5 (Windows) crashes while using " Forgot password?" |
The following ELOG behavior seems to be like a bug ...
-> Anybody click on "Forgot password?" in the login screen, to have the system
send him the forgotten password, and after a little while trying, (possibly doing
resolution) the ELOG application crashes.
The ELOG service have to registered again.
The SMPT host may not be right, but ELOG should not crash just for that.
It should says something like "Can not find SMTP server", etc.
Have anybody got into this problem?, or
What else could be causing this behavior? |