| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
1307
|
Mon Jul 25 10:14:27 2005 |
 | Dinesh Bapat | dinesh.bapat@gmail.com | Question | | | Summary page | Hi,
This might be a stupid question.
But I was unable to fix it. Hence asking for help. I have set config as
List Display = ID, Author, Type, When, Subject
But "Summary" page of my e-log continues to display additional column "Text". Kindly advise how to hide this last column. Also, is it possible to assign % width for each of these columns (ID, Author, Type, When, Subject)
Thank you
Regards
Dinesh |
|
1306
|
Sat Jul 23 18:30:57 2005 |
 | Stefan Ritt | stefan.ritt@psi.ch | Bug report | All | | Re: <img> in Display Attribute |
| Emiliano Gabrielli wrote: | | if one uses ROptions instead of a simple Options the text displaied is "plain{1}" (with the "{1}" not stripped out!!) |
Ok, fixed. |
|
1305
|
Sat Jul 23 18:23:57 2005 |
| Stefan Ritt | stefan.ritt@psi.ch | Request | All | | Re: <img> in Display Attribute |
| Emiliano Gabrielli wrote: | | I'd like to be able to do what I explained in elog:1289 ... |
Ok, got it. So I implemented conditional display in the list mode. If that works for you, it was the last wish fulfilled before Christmas!  |
|
1304
|
Sat Jul 23 16:45:28 2005 |
| Emiliano Gabrielli | AlberT@SuperAlberT.it | Bug report | All | | Re: <img> in Display Attribute |
| Stefan Ritt wrote: |
BTW: Conditional attributes now also work for email notifications, so you can do for example:
Attributes = Author, Category, Email encoding, Subject
Options Email encoding = plain{1}, HTML{2}
{1} Email encoding = 1
{2} Email encoding = 2
|
if one uses ROptions instead of a simple Options the text displaied is "plain{1}" (with the "{1}" not stripped out!!) |
|
1303
|
Sat Jul 23 16:16:10 2005 |
| Emiliano Gabrielli | AlberT@SuperAlberT.it | Request | All | | Re: <img> in Display Attribute |
| Stefan Ritt wrote: |
| Emiliano Gabrielli wrote: | - only "Author" and "subject" is displayed (text too of course)  |
That was a bug. I fixed it in CVS.
| Emiliano Gabrielli wrote: | In full list mode:
- nothing changed, no conditional display is working |
What do you want? In full mode you have a multi-column display of attributes. If you display a different number of attributes for each entry, the table gets screwed up and becomes very hard to read.
BTW: Conditional attributes now also work for email notifications, so you can do for example:
Attributes = Author, Category, Email encoding, Subject
Options Email encoding = plain{1}, HTML{2}
{1} Email encoding = 1
{2} Email encoding = 2
|
I don't want to change the number of columns along different rows .. of course 
I'd like to be able to do what I explained in elog:1289 ...
not to display or not an attribute, but to be able to choose among different display of an attribute basing the choice on the value of an other attribute
look at my previous post .. I'm trieng to display an icon in the "category" attribute showing the "level" of the "problem", beeing "problem" one of the possible values of the attribute "category" itself |
|
1302
|
Sat Jul 23 15:46:06 2005 |
| Stefan Ritt | stefan.ritt@psi.ch | Comment | All | | Re: A new ELOG user wants to register on "127.0.0.1" | Ok, I kind of misunderstood the "-n" parameter. It is the interface to listen to, which is not necessarily the host name as seen from outside. I changed that in the following way:
- if the URL option is present, the host name is taken from there
- if the URL option is not present, elog calls gethostname()/gethostbyname() to retrieve the local host name
the host name which comes from these two possibilities is used internally in all cases where it's needed, like email notifications. |
|
1301
|
Fri Jul 22 23:14:23 2005 |
| Stefan Ritt | stefan.ritt@psi.ch | Request | All | | Re: <img> in Display Attribute |
| Emiliano Gabrielli wrote: | | - only "Author" and "subject" is displayed (text too of course) |
That was a bug. I fixed it in CVS.
| Emiliano Gabrielli wrote: | In full list mode:
- nothing changed, no conditional display is working |
What do you want? In full mode you have a multi-column display of attributes. If you display a different number of attributes for each entry, the table gets screwed up and becomes very hard to read.
BTW: Conditional attributes now also work for email notifications, so you can do for example:
Attributes = Author, Category, Email encoding, Subject
Options Email encoding = plain{1}, HTML{2}
{1} Email encoding = 1
{2} Email encoding = 2
|
|
1300
|
Fri Jul 22 22:45:37 2005 |
| Stefan Ritt | stefan.ritt@psi.ch | Request | Linux | V2.6.0 | Re: hide attributes when view the logbook |
| Juliana Peng wrote: | | Thanks so much. But the new feature seems not working. |
Are you sure you got the latest CVS version and recompiled correctly?
I tried with following config:
[global]
port = 8080
[demo]
Attributes = Name, SysAdmin, OS, Manufacturer, Model, Serial Number, Description, Main Function, Location, Memory, CPU Speed, Num CPU, Owner, Contact Name, Contact Phone, Contact Email, Bought From, Bought Date, Maintenance, Network Drop, Console Drop
Options OS = SunOs{1}, Linux{2}, Aix
{1} Show Attributes = Name, SysAdmin, OS, Manufacturer, Model, Serial Number, Description
Then I added two entries, where OS = SunOS and Aix. As soon as I select SunOS, the attributes except those listed in {1} disappear. The same is true then for the single entry display. Here is the one with the Aix:
and here with SunOS:
So can you reproduce this? |
|