> > Is there any way to configure elog so that attribute fields can be edited 
> > on more than line like the 'text' field? 
> > 
> > (This would be useful so that attributes could contain larger portions of 
> > text including line breaks)
> 
> No, but this request is already on the wishlist
> (http://midas.psi.ch/elog/wishlist.html) since some time. I added your vote.

Stefan,

Was just wondering about the status of the multi-line attributes in Elog, are 
they implemented in elog yet? If not is that something you are planning to do 
in the future?

many thanks

Paul

> Okidokie. May I then humbly suggest to mention this in the documentation of the elog command client?

I did modify it already, see http://midas.psi.ch/elog/userguide.html at the bottom.

Okidokie. May I then humbly suggest to mention this in the documentation of the elog command client?

> On a side note, one would expect that when "Fixed Attributes Edit" or "Fixed Attributes
> Reply" is set, the attributes in this list shouldn't be supplied with the command line client.

Well, don't shoot yourself in the foot! The communication between elog and elogd is limited. elog
more or less submits "blindly" whatever you give it on the command line. If "Fixed Attributes
Edit/Reply" is set in the configuration, this only affects the web page with the entry form, so
these attributes are not shown as edit boxes. They are not checked during submission by elogd. Now
to get the same functionality with elog, elog whould have to retrieve the full entry form, analyze
the HTML code, find out which attributes have edit boxes and which ones not. So that's a lot of
work. Since most people use elog in scripts, they set it up once and forever correctly. There are
actually a few people which even want the functionality that elog can change attributes which are
normally fixed.

- Stefan

This solved the problems, thanks for the fast response!

On a side note, one would expect that when "Fixed Attributes Edit" or "Fixed Attributes
Reply" is set, the attributes in this list shouldn't be supplied with the command line client.

Anyway, my problem is solved. Thanks for the great product.

Pieter.

> There is a read password ("Read Password=..." entry in elogd.cfg) on
> the logbook which I cannot bypass from the client.

This is correct. The elog utility works with write passwords and user level access
(specifying a password file), but not with read passwords, that's not implemented. Use a
password file and you should be fine.

> There is a required attribute called "Publiek", and it's defined as
> MOptions. Whenever I try to upload, I keep getting the message that 
> it misses this attribute.

Your problem is that you try to combine a MOptions with a "-r <n>" (reply-to) option. I
have never tried that and found there is a problem. I changed the way MOptions are
submitted. Instead of using <name>_0, <name>_1 etc, you can now do a 

-a "<attrib>=<value1> | <value2>"

This also solves the problem with the "-r" option. You have to upgrade elogd.c from CVS.

Hi all,

I'm trying to use the command-line client from linux, but I can't make it work and that's driving me nuts...

What I want is to reply to a selected message in the logbook, but I stumble onto two problems:

1. There is a read password ("Read Password=..." entry in elogd.cfg)on the logbook which I cannot bypass from the client. Specifying the switch -u "" password on the command line has no effect, and neither does -w password. The error message I get is included at the bottom of this message. If I disable the read password, I get past the authentication.
2. There is a required attribute called "Publiek", and it's defined as MOptions. Whenever I try to upload, I keep getting the message that it misses this attribute. I tried the switch -a Publiek=Anders, -a "Publiek=Anders", -a Publiek_0=Anders, -a "Publiek_0=Anders" -a "Publiek_1=Onbekend, -a Publiek=1 on the beginning, end, and middle of the command, but the results are the same. Both "Anders" and "Onbekend" are in the MOptions list (including capitals).

For completeness, here's (one variety) of my command line:

elog -a "Publiek=1" -h localhost -p 8181 -l Artikelen -v -r 80

The obvious question is if anybody knows what I'm doing wrong. Any help is greatly appreciated.

Pieter

Successfully connected to host localhost,
port 8181
Request sent to host:
GET /Artikelen/80?cmd=download HTTP/1.0
Host: pde.dyndns.org
User-Agent: ELOG
Cookie: upwd=bWFOZGFyaWpO;

Response received:
HTTP/1.1 401 Authorization Required
Server: ELOG HTTP 2.5.7-1
WWW-Authenticate: Basic realm="Artikelen"
Connection: close
Content-Type: text/html

<HTML><HEAD>
<TITLE>401 Authorization Required</TITLE>
</HEAD><BODY>
<H1>Authorization Required</H1>
This server could not verify that you
are authorized to access the document
requested. Either you supplied the wrong
credentials (e.g., bad password), or your
browser doesn't understand how to supply
the credentials required.

</BODY></HTML>

Error transmitting message

Successfully connected to host localhost, port 8181
Request sent to host:
POST /Artikelen/ HTTP/1.0
Content-Type: multipart/form-data; boundary=---------------------------75ABFDB1E
CB47273B853CE0
Host: pde.dyndns.org
User-Agent: ELOG
Content-Length: 3651


Content sent to host.
Response received:
HTTP/1.1 200 Document follows
Server: ELOG HTTP 2.5.7-1
Content-Type: text/html;charset=ISO-8859-1
Connection: Keep-Alive
Keep-Alive: timeout=60, max=10

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html><head><title>ELOG error</title>
<link rel="stylesheet" type="text/css" href="default.css">
<link rel="shortcut icon" href="favicon.ico">
<link rel="icon" href="favicon.png" type="image/png">
</head>
<body><center>
<table class="dlgframe" width="50%" cellpadding=1 cellspacing=0<tr><td
class="er
rormsg"><i>Error: Attribute <b>Publiek</b> not
supplied.</i><p>
Please go back and enter the <b>Publiek</b> field.
</td></tr>
<tr><td class="errormsg">Please use your browser's back button to go back
</td></tr>
</table>
</center></body></html>

Error: Missing required attribute "Publiek"

Hi,

Is there a command line in the configuration files to show all of sub logs 
on the main page of elog instead of clicking on "Expand All" on the top of 
ELOG ?

Thanks