I am trying to add additional information to the subject of new entries:

Subst subject = $subject [INCIDENT $message id]
Subst on reply subject = Re: $subject
Fixed Attributes Reply = Subject

However, the new entry subject looks like:

this is my subject [INCIDENT this is my subject [INCIDENT $message id]

I'm not sure if there's a problem with the substitution or if this is just not allowed (I'm having LISP flashbacks).

By the way, if I use "Subst on reply subject" I get the behavior I would like but the original entry in the thread doesn't contain the appended data:

Subst on reply subject = Re: $subject [INCIDENT $message id]

Any help would be appreciated.

Alex

When compiling elog on OSX 10.9 (Mavericks), I get the error below.

Elog will compile without error if I add -D_FORTIFY_SOURCE=0 to CFLAGS in Makefile, but I'm not sure whether this is a good idea.

$ make

cc -O3 -funroll-loops -fomit-frame-pointer -W -Wall  -I../mxml  -DHAVE_SSL -w -c -o crypt.o src/crypt.c

cc -O3 -funroll-loops -fomit-frame-pointer -W -Wall  -I../mxml  -DHAVE_SSL -o elog src/elog.c crypt.o -lssl

src/elog.c:125:8: error: expected parameter declarator

size_t strlcpy(char *dst, const char *src, size_t size)

       ^

/usr/include/secure/_string.h:105:44: note: expanded from macro 'strlcpy'

  __builtin___strlcpy_chk (dest, src, len, __darwin_obsz (dest))

                                           ^

/usr/include/secure/_common.h:39:62: note: expanded from macro '__darwin_obsz'

#define __darwin_obsz(object) __builtin_object_size (object, _USE_FORTIFY_LEVEL > 1 ? 1 : 0)

                                                             ^

/usr/include/secure/_common.h:30:32: note: expanded from macro '_USE_FORTIFY_LEVEL'

#    define _USE_FORTIFY_LEVEL 2

                               ^

src/elog.c:125:8: error: expected ')'

/usr/include/secure/_string.h:105:44: note: expanded from macro 'strlcpy'

  __builtin___strlcpy_chk (dest, src, len, __darwin_obsz (dest))

                                           ^

/usr/include/secure/_common.h:39:62: note: expanded from macro '__darwin_obsz'

#define __darwin_obsz(object) __builtin_object_size (object, _USE_FORTIFY_LEVEL > 1 ? 1 : 0)

                                                             ^

/usr/include/secure/_common.h:30:32: note: expanded from macro '_USE_FORTIFY_LEVEL'

#    define _USE_FORTIFY_LEVEL 2

                               ^

src/elog.c:125:8: note: to match this '('

/usr/include/secure/_string.h:105:44: note: expanded from macro 'strlcpy'

  __builtin___strlcpy_chk (dest, src, len, __darwin_obsz (dest))

                                           ^

/usr/include/secure/_common.h:39:53: note: expanded from macro '__darwin_obsz'

#define __darwin_obsz(object) __builtin_object_size (object, _USE_FORTIFY_LEVEL > 1 ? 1 : 0)

                                                    ^

Ok, I tried updating my SVN working copy, but I didn't get any updates past elog rev. 2494, mxml rev. 74.  I undid my changes to Makefile, tried to compile, but got the same errors.  

I then pulled down elog and mxml with git, and these are working for me with no errors.  Thanks!

hi

I have an elogsystem for documenting emergency services. I have a starttime and an endtime. Is it possible to calculate the diff between the 2 timestamps and convert it to minutes?

Attributes = Bereitschafts Kalender Woche, Bereitschafts Woche, Einsatzbeginn, Einsatzende, Einsatzzeit, Telefon Nummer, Station, Status, Problem 
Options Status= Offen{1}, Erledigt{2}, Geschlossen{3}

......

Type Einsatzbeginn = datetime
Type Einsatzende = datetime

....

Subst Einsatzzeit  = $shell(Einsatzende - Einsatzbeginn) 

regards

/alex

I found the solution in the forum :-)

subst Einsatzzeit = $shell(/usr/local/elog/diff.sh \"$Einsatzbeginn\" \"$Einsatzende\")

and diff.sh is

#!/bin/sh
#set -x
s1=$(date -d "$1" +%s)
s2=$(date -d "$2" +%s)
d=$(echo "($s2-$s1)/60"|bc -lq)
printf "%.0f Minuten" $d
 

is ist possible that subst only works for the initial create of a logbook entry? when I change/edit one of the parameter "Einsatzbegin" or "Einsatzende" the "Einsatzzeit" is not changed.

regards

/alex

thx!

hello

Is there a way to export logs from elog (for example after I have selected a filter) to txt or csv...

I found the "Download" attribute but this works for only one elog entry...

regards