Re: calculate the value of one attribute depending upon the value of other attribute., posted by Andreas Luedeke on Mon Jan 26 15:56:41 2015
|
If you have the following elogd.cfg:
Attributes = START, END, DURATION
subst DURATION = $shell( /usr/local/elog/diff.sh \"$START\" \"$END\")
Show Attributes Edit = START, |
|
Re: calculate the value of one attribute depending upon the value of other attribute., posted by dev on Mon Jan 26 19:24:02 2015
|
I tried that It is not calculating and it is giving the error "Shell execution not enabled via -x flag ".I started elogd -x from command prompt it still gives the
same error. |
Link to full resolution image attachments, posted by Eric Quintero on Mon Jan 26 23:13:47 2015
|
Hi all,
It's possible my question is entirely within the domain of CKeditor, but I figure it may also have something to do with how it's plugged
into ELOG. |
|
Re: calculate the value of one attribute depending upon the value of other attribute., posted by Andreas Luedeke on Tue Jan 27 15:59:59 2015
|
Yes, I forgot to mention that you need to enable shell script execution by starting the server with "elogd -x".
Before you start elogd from the command line you need to shutdown any running elogd; otherwise the port is blocked and the command line elogd
cannot start: "sudo /sbin/service elogd stop" |
Re: Link to full resolution image attachments, posted by Stefan Ritt on Tue Jan 27 17:03:53 2015 
|
Strange. If I attach a big image to this post (see below), I see the thumbnail, but when I click on it it, I get redirected to the full resolution image.
No idea why it is not working for you.
Eric |
|
Re: calculate the value of one attribute depending upon the value of other attribute., posted by dev on Tue Jan 27 17:18:17 2015
|
I am working in window system.Itries using elogd stop and start command but it is always showing it is running.Kindly help me
thanking you.
Andreas |
|
Re: calculate the value of one attribute depending upon the value of other attribute., posted by Andreas Luedeke on Wed Jan 28 09:57:11 2015
|
Unfortunately I cannot help you with Windows. But you must have started the service somehow in the first place: that is where I would expect you can
stop it as well.
dev |
|
Re: Link to full resolution image attachments, posted by Eric Quintero on Wed Jan 28 17:18:08 2015
|
Stefan Ritt
wrote:
Strange. If I attach a big image to this post (see below), I see the thumbnail,
but when I click on it it, I get redirected to the full resolution image. No idea why it is not working for you. |