That is the the problem the text does not resize with the window or sending to the printer.

 Dear Team,

I am having a log book and would like to activate the email notification. I have made the changes as per the guidelines but I am getting the error message while submitting the entry - Error sending Email via "smtp.omantel.net.om": 5.5.4 cannot decode AUTH parameter

The details are as below : (Please note I have replaced the password with the * marks)

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} NEW entry #0

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} Email from <harish.amin@holiday.co.om> to harish.amin@holiday.co.om, SMTP host smtp.omantel.net.om

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 220 fmgw1.omantel.net.om ESMTP Smtpd; Fri, 21 Nov 2014 15:32:52 +0400

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} 

21-Nov-2014 16:58:28 [harish@127.0.0.1] {SCREENING VISIT} EHLO localhost

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-fmgw1.omantel.net.om Hello [188.66.222.72], pleased to meet you

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-ENHANCEDSTATUSCODES

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-PIPELINING

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-8BITMIME

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-SIZE 32235520

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DSN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-AUTH LOGIN PLAIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-STARTTLS

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250-DELIVERBY

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} 250 HELP

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} AUTH LOGIN

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Username

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} harish.amin@holiday.co.om

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} Password

21-Nov-2014 16:58:29 [harish@127.0.0.1] {SCREENING VISIT} ******

21-Nov-2014 16:58:30 [harish@127.0.0.1] {SCREENING VISIT} 501 5.5.4 cannot decode AUTH parameter ******

Please help me to resolve this issue.

Thank you

Harish Amin

Grrr.  Forgetting to pick an icon means my message was blasted.

I have installed elog 2.7.8 and it is running.  When I connect to it and get a login window, I am always denied.  If I remove the passwords, then I can login with no password information.  I have tried both command line for setting passwords and directly in the elogd.cfg file.

Suggestions on what I might be doing wrong would be appreciated.

Regards,

Ian

PS - are there RESTful interfaces to automate the generation of log entries via an HTTP POST or HTTP GET?

Hi,

I've just installed the news 3.1.5 version and I have 2 problems.
I don't know if it works with older versions because I started with latest.

- When using "select" menu then "edit" for multiple entries, the text is replaced with "- keep original text here -" instead of keeping the original values. Really annoying...

Another problem too, if I want to edit after, I have the error message "only author - keep original text here - can edit" although the author column is OK..
It looks like this problem is global and not only on text column.

- Version number is indicated "ELOG V3.1.4" instead of V3.1.5.

My config file :

I'm using Apache as reverse proxy with SSL and transparent Kerberos authentication (Microsoft Active Directory).
URL via Apache is https://elog.xxxxxx.xxx (no subdirectory).

Thanks for your help.

I upgraded 2.7.5 rev 2175 to 2.7.7 rev 2246 last Thursday. I tested it with several logbooks with no problems. However I received a rep[ort today that it was down. I discovered whenever I tried to open a logbook entitled "Equipment Reservation" in the folder "EquipmentReservations" Elog would crash. I checked the elog.log file with no entries in it other than showing when it was restarted. I backed up to 2.7.5 and had no porblems with the same logbook. I repeated the upgrade to 2.7.7 with the crash problem returning. I am now back on 2.7.5 with no problems.

I just decided to try 2.7.6 rev 2239 and had the same results as 2.7.7.

This is running under Win2K with SP4 as an automatic service on port 80.

I am also running Elog V2.7.4-2118 on a different port (8080) simultaneously with no problems.

If you wish I will send the elog.cfg file. Anything else I can do to help, please let me know.

Thanks,

David

hello all,

#1 i love ELOG : excellent app! i would like to ask/present a question here -- I have a couple of TYPE's defined as;

       Options Type = Day Shift, Swing Shift, Night Shift
What I'd love to be able to do, is depending on what TYPE was selected during the creation of a NEW ENTRY in the ELOG "shift log" I'd love to display in the LIST VIEW (full, summary, or threaded views) different color's based on which TYPE was selected...

for example, if someone chose "Day Shift" that would be listed with a GREEN background, if someone chooses "Swing Shift" that gets a BLUE background, and so forth... I am wondering how one would go about implementing this?

second question... instead of listing the column named TYPE, can I just change it somewhere in the config to "SHIFT" so that in the list view, and even when in the NEW ENTRY form, I'd like it to show "Shift" instead of TYPE --- really I am just wondering if I can change the verbage that ELOG is using for the term TYPE? Is that doable?

Thanks for the app, I look forward to any reponses! I been editing the CSS, and once done think I'll add it to yr Config Examples, as I don't see many CSS themes there...

-peace-

Hello,

I try to have two Extendable options : Client and Equipment
so here is the line in my elogd.cfg
Extendable options = Client, Equipment

When I create a new entrie, I have the 2 scroll menus(Client and 
Equipment) and the 2 buttons(Client and Equipment) but i can't create 2 
news entries, i must create one for client, after I submit, I edit one 
more time and add a new equipement. Is there a solution for this?

Thanks a lot and sorry for mistakes or problem of comprehension i'am 
french :)