Hello,
    Is it possible to have a drop down list with commas in the options.  
For instance, if you want to have a attribute "CityState" you would 
probably want a comma between the City and State name.  Since the Options 
are separated by commas, it turns into two different options.  I dont know 
if there is a way to do this or if this is a bug?

MO

> Try to submit the following message:
> 
> *** cut here ***
> -------------------------------------------------
> -------------------------------------------------
> -------------------------------------------------
> -------------------------------------------------
> *** cut here ***
> 
> In fact after the next line there were 4 lines with '-', but
> they were not accepted by elog:

Ok, also fixed. Updated version is at 

http://midas.psi.ch/cgi-bin/cvsweb/elog/elogd.c

Here is actually an example with '----' at the end:

-------------------------------------------------
-------------------------------------------------
-------------------------------------------------
-------------------------------------------------

> I want to set up eLogs for a class w/out the need for passwords. But, at the
> same time, I don't want the students to change the config file. I tried
> setting up a global password, but am having some difficulty with the syntax
> I suppose I could remove the config command from the menu and edit the file
> using Pico, but that would require a better memory than I have...
> 
> ******************
> 
> usage: elogd [-p port] [-h hostname] [-D] [-c file] [-r pwd] [-w pwd] [-a
> pwd] [-l logbook]
> 
>        -p <port> TCP/IP port
>        -h <hostname> TCP/IP hostname
>        -D become a daemon
>        -c <file> specify configuration file
>        -v debugging output
>        -r create/overwrite read password in config file
>        -w create/overwrite write password in config file
>        -a create/overwrite admin password in config file
>        -l <logbook> specify logbook for -r and -w commands
> 
>        -k do not use keep-alive
> 
> [root@eMonster elog]# elogd -a youtheman
>           
> Must specify a lookbook via the -l parameter.

Nearly correct, just follow the note: specify a logbook via the -l parameter.
So if you logbook is called "linux", you enter

elogd -a youtheman -l linux

> The mode (i.e. summary, threaded, full) should be kept for the
> last??? and past??? links on a page.
> 
> For instance:
> 
> http://midas.psi.ch/elogdemo/Linux/last10?mode=threaded
> 
> The last20 link on this page should also be in threaded mode.

Has been fixed. Will be included in next version.

> Try this URL
> 
> http://midas.psi.ch/elogdemo/Forum/?cmd=Search

Ok, has been fixed. Will be included in the next version.