DRS4 Forum
  DRS4 Discussion Forum  Not logged in ELOG logo
 Back  |  Find  |  Login  |  Help 
Entry  Wed Jan 17 09:51:16 2018, Tran Cong Thien, The input signals recorded are different with the signal showed in oscilloscope  
    Reply  Wed Jan 17 10:09:09 2018, Stefan Ritt, The input signals recorded are different with the signal showed in oscilloscope  
Message ID: 651     Entry time: Wed Jan 17 09:51:16 2018     Reply to this: 652
Author: Tran Cong Thien 
Subject: The input signals recorded are different with the signal showed in oscilloscope  

Dear Stefan,

I am using an DRS4 board to record the signals from an plastic scintillator detector. It was working really good, yet a few day ago the signals became "not right". When I checked the signal using an oscilloscope it show the normal signals previously recorded. The signal amplitude are clearly reduced (from 0.3 in oscilloscope to lower than 0.1 in DRS4). Can you show me how to show this problem?

Thank you very much!

Best Regards,

Thien 

ELOG V3.1.5-fe60aaf