DRS4 Forum
  DRS4 Discussion Forum  Not logged in ELOG logo
Entry  Sat Jan 15 09:13:42 2022, student_riku, I want to know about the readout 
    Reply  Sat Jan 15 10:50:47 2022, Stefan Ritt, I want to know about the readout 
       Reply  Wed Jan 26 06:44:11 2022, student_riku, I want to know about the readout 
Message ID: 861     Entry time: Wed Jan 26 06:44:11 2022     In reply to: 857
Author: student_riku 
Subject: I want to know about the readout 

Dear Stefan

Thanks a lot.

I solved it.

 

Stefan Ritt wrote:
student_riku wrote:

Am I right in thinking that inputting 1 to DMODE (Bit0) in the configuration register will connect the 1024th cell to the 1st cell?

Yes, as desceribed in the manual .

student_riku wrote:

Also, let's assume that after sampling 1024 cells on channel 0, 200 cells are sampled in the second week.
Does the readout of 1024 cells start from cell 0?
Or does it start from the 200th cell?

I don't understand what you mean by "second week". 

Normally, you run the chip continously (DMODE=1) until you receive a trigger. Then, you typically read out the chip from the stop position by using a RSRLOAD pulse (as described unter "REGION-OF-INTEREST READOUT MODE".

Stefan

 

ELOG V3.1.4-bcd7b50