DRS4 Forum
  DRS4 Discussion Forum  Not logged in ELOG logo
 Back  |  Find  |  Login  |  Help 
Entry  Tue Apr 12 10:40:36 2022, LynseyShun,  
    Reply  Tue Apr 12 10:49:27 2022, Stefan Ritt,  
       Reply  Thu Jun 16 05:31:25 2022, LynseyShun,  
Message ID: 884     Entry time: Thu Jun 16 05:31:25 2022     In reply to: 883
Author: LynseyShun 
Subject:  

Thank you very much for your help!

Stefan Ritt wrote:

A3-A0 = 1001 should be all you need to activate OUT0-OUT7. It works in our designs. Maybe double check the address lines with an oscilloscope.

Stefan

LynseyShun wrote:

Hello, I am Lynsey. now I set A3-A0 to 1001 in ROI mode, but only OUT0 has output, and the other seven channels(OUT1-OUT7) do not output corresponding waveforms.

In ROI mode, can OUT0-OUT7 output sampled waveforms at the same time?

thank you very much

 

 

ELOG V3.1.5-fe60aaf