Originally, all information about our machines was stored in a spreadsheet with one sheet for the hardware of the machines and one for the software. By now, I've sucessfully moved the software part to an elog logbook and am now looking at transferring the hardware part as well.

As both lists are machine-name based, one of the options would be to merge both lists, as this would place all machine-related info into one logbook. The downside of this is that I get so many columns in list view that the result is quite unwieldy. Hence, I would like to hide some columns - ideally creating a "hardware view" and a "software view".

From the documentation, the only option I could find that seemed suitable was "List conditions". Unfortunately, I do not quite understand from the manual how this is supposed to work, so I'm quite possibly doing something wrong. I've tried this:

; General settings
List conditions = 1

; Attributes
Attributes = Type, Created, StatusA, StatusB, Archived

; Options & Tooltips
Options Type = Type1{10}, Type2{11}

; Conditionals
{10}List display = Edit, Type, Created, Status
{11}List display = Edit, Type, Created, StatusA, StatusB, Archived

but no matter how I set "Type", it does not seem to have any effect on the List display. One thing I don't understand for example is how does elog decide in List view which entry sets the condition? If all entries are set to the same value (in this example e.g. "Type1")? The first entry? Or am I missing something altogether?

Also, if there are alternative ways how I could accomplish my goal, I'd also be most grateful for suggestions.

Thanks in advance,

Thomas