Hi,

I use some CSS for each elog to resize column correcly and it seems that current ELOG version 3.14 available from EPEL for EL7 has a problem (maybe others also).

The browser console displays an error when loading ELOG logbook page (french locale ):

La feuille de style https:/xxxxx.xxx.xx/elog/MCO/1130_171749_REUNION_20221130_Q01.jpgelog-mco.css n’a pas été chargée car son type MIME, « text/html », n’est pas « text/css ».

It seems ELOG server send the css link with enclosure path (https:/xxxxx.xxx.xx/elog/MCO/1130_171749_REUNION_20221130_Q01.jpg) + css file (elog-mco.css) ?!?

I tryed to rebuild the last source from git under EL7 but it fails with LDAP libs (C++ regression already reported in elog:forum/69478). :-(

Thanks for help.

Laurent

Hi Stefan,

It seems buildrpm should be updated to take care of cpp files. Plz replace "cp <blahblah>.c ..." by "cp <blahblah>.cxx ..." .

Also, uncomment the hostname test witch activates all authentification options by default. It should be done by adding options as follow : buildrpm ver rel -ldap -ker ...

By default, i can not build elog with LDAP.

After that mods, rpms are builded under EL7 (w/o LDAP support which is not useful for me).

Bye

Laurent

Hello, the following URL

https://foo.bar/elog/Shift+Reports/?new_user_name=a2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.com&new_full_name=a2seferewd%40fanneat.com&new_user_email=a2seferewd%40fanneat.com&newpwd=asdf&newpwd2=asdf&cmd=Save

causes elog 3.1.4 to crash. I attach full GDB trace

(gdb) set height 0
(gdb) set print elements 0
(gdb) set print frame-arguments all
(gdb) thread apply all backtrace

Thread 1 (Thread 0x7fc6d1624840 (LWP 1126)):
#0  0x00007fc6d06c6387 in raise () from /lib64/libc.so.6
#1  0x00007fc6d06c7a78 in abort () from /lib64/libc.so.6
#2  0x00007fc6d0708f67 in __libc_message () from /lib64/libc.so.6
#3  0x00007fc6d07a87a7 in __fortify_fail () from /lib64/libc.so.6
#4  0x00007fc6d07a6922 in __chk_fail () from /lib64/libc.so.6
#5  0x00007fc6d07a5e2b in _IO_str_chk_overflow () from /lib64/libc.so.6
#6  0x00007fc6d070d031 in __GI__IO_default_xsputn () from /lib64/libc.so.6
#7  0x00007fc6d06dd033 in vfprintf () from /lib64/libc.so.6
#8  0x00007fc6d07a5eb8 in __vsprintf_chk () from /lib64/libc.so.6
#9  0x00007fc6d07a5e0d in __sprintf_chk () from /lib64/libc.so.6
#10 0x0000000000423b5b in sprintf (__fmt=<optimized out>, __s=<optimized out>) at /usr/include/bits/stdio2.h:33
#11 get_user_line (lbs=<optimized out>, lbs@entry=0x2833748, 
    user=user@entry=0x7fffc84d0780 "a2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.combasar", password=password@entry=0x0, full_name=full_name@entry=0x0, email=email@entry=0x0, email_notify=email_notify@entry=0x0, 
    last_logout=last_logout@entry=0x0, inactive=inactive@entry=0x0) at src/elogd.c:25739
#12 0x0000000000433d0a in save_user_config (lbs=lbs@entry=0x2833748, 
    user=0x7704fc <_value+1500> "a2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.coma2seferewd@fonomsdfef.com", new_user=new_user@entry=1) at src/elogd.c:13343
#13 0x0000000000456068 in do_self_register (lbs=0x2833748, command=0x7fffc84d2650 "Save") at src/elogd.c:26768
#14 0x000000000045c1f7 in interprete (lbook=lbook@entry=0x7fffc84f92f0 "Shift Reports", path=path@entry=0x7fffc84d4430 "") at src/elogd.c:27594
#15 0x000000000045ecc6 in decode_get (logbook=logbook@entry=0x7fffc84f92f0 "Shift Reports", string=<optimized out>) at src/elogd.c:28393
#16 0x0000000000460970 in process_http_request (request=<optimized out>, 
    request@entry=0x284bee8 "GET /Shift+Reports/?new_user_name=a2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.coma2seferewd%402sefddsfgfd.com&new_full_name=a2seferewd%40fanneat.com&new_user_email=a2seferewd%40fanneat.com&newpwd=asdf&newpwd2=asdf&cmd=Save", i_conn=i_conn@entry=1) at src/elogd.c:29201
#17 0x00000000004623d2 in server_loop () at src/elogd.c:30212
#18 0x0000000000404209 in main (argc=8, argv=0x7fffc84fb6c8) at src/elogd.c:3123

Dear Stefan, 

There is a problem with editing an Elog page in "plain" format with the following "User Agent" :

"Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/16.1 Safari/605.1.15"

It duplicates the newline symbols such that "1<CRLF>2" becomes "1<CRLF><CRLF>2". If edited again - "1<CRLF><CRLF><CRLF><CRLF>2".

I blame the new version of the Apple WebKit. 

It works fine with Chrome (user agent: "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/108.0.0.0 Safari/537.36"). But fails with Safari. 
 

Could you please have a look? 

Thank you in advance, 

Andrey Pashnin

AMS collaboration

I am still struggling to get ELOG running behind a load balancer and hope to get some advice here. As already reported in https://elog.psi.ch/elogs/Forum/69542 I observed an infinite loop of redirects when prompted to log in and using a non-empty password file. Without a password, the service worked as expected. This was with version 3.1.3.

With the new version 3.1.4-3, I get another error: "Invalid Content-Length in header" when I click on "submit" of a new post. Viewing the logbooks works fine. The instance is currently live and running here: https://elog.test.km3net.de but I might change it anytime due to debugging etc.

This is a kind of difficult thing to debug (I spent the whole day and no progress). The only thing I've found was this post: https://techcommunity.microsoft.com/t5/iis-support-blog/invalid-content-length/ba-p/3038724 where it seems that some responses are not RFC conform and were rejected in the load-balancer.

The load balancer I use is HAProxy, the same as in my old setup where I got the infinite redirects, and I can't find any setting which would work. To my understanding, the most basic setup should work just fine. The SSL termination is on the load-balancer side so ELOG doesn't even have to know anything about it. The configuration is below. I am running a single instance, so there is not even replication with session keep-alive via cookies or anything fancy.

I also want to mention that I am runnin around 30 different services behind the load balancer and none of them are having any issues with the SSL termination or the load-balancing itself, that's why assume that something in ELOG is either non-conform or buggy.

Any thoughts? I'd really like to use the same infrastructure for the ELOG service as for every other service (automatic certificate renewal via letsencrypt, load-balancing, easy movement to other nodes, SSL termination etc.), to minimise the complexity of our Docker Swarm system.

backend be_elog.km3net.de
    mode http
    server-template km3net-elog- 1 km3net-elog_elog:8080 check resolvers docker init-addr libc,none

Btw. I am running ELOG with -v but I don't see any error whatsoever in the logs:

km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | GET /demo/ HTTP/1.1
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Received unknown cookie "ios_specific_templates_id"
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Received unknown cookie "rl_anonymous_id"
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Received unknown cookie "rl_group_id"
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Received unknown cookie "rl_group_trait"
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Received unknown cookie "rl_trait"
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Received unknown cookie "rl_user_id"
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Received unknown cookie "logged_out_marketing_header_id"
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Returned 3437 bytes
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | GET / HTTP/1.1
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Returned 120 bytes
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | GET /demo/ HTTP/1.1
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Returned 3518 bytes
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | GET / HTTP/1.1
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Returned 120 bytes
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | GET /demo/ HTTP/1.1
km3net-elog_elog.1.fm8i1eia9l9t@ecap-s021    | Returned 3518 bytes

I downloaded the last elog-3.1.5-1.tar.gz to install elog.

All *.cxx files are missing.

I wanted to change some CKeditor settings so tried modifying elog/scripts/ckeditor to no avail.

I wiped elog/scripts/ and dropped a fresh download of CKeditor4, with only the basic extensions. But when I open the elog it still shows the full toolbar, with elog default style and with all extensions operational.

If I leave elog/scripts empty, I get "CKeditor NOT detected" when starting elogd and the HTML option is empty and shows nothing, all as expected.

Does anyone understand this? Is there some CKeditor configuration file elog is defering to that I've overlooked? I have tried system wide seaches just in case.

I have replied to this entry, because, for some reason I don't understand, if I reply to your latest entry, I am
automatically logged out.  I tried this multiple times, and also on many other entries and had no issues other than
entry 69787 - any reason for this, Stefan?

Anyway, what about MOptions? That appears to do what your example, and needs two lines in elog.cfg file:

Moptions WaferID = 1001, 1002, 1003, 1004, 1005
Extendable Options = WaferID

I've done a couple of quick tests on a test logbook I keep for such experimentation, and it appears to do all 
you have asked of it.  I added a new option 1006.  However, I found that one has to add that new one on its own, 
let the entry become proper, and then edit the entry to add the other, existing, values.   If you tick entries and 
also add a new one, then your new entry is all those listed on their own, that is you would get and new entry
in the config file such as "1002 | 1004 | 1006", rather than just 1006

This is probably an result of an unexpected use of Moptions and extendable options, rather than a bug per se.

> Hey, 
> 
> thanks for your answer. I completely get your point. However, I think my question as not precise enough.
> 
> I would like to have a numeric input, but many at the same time. When I make a new post, I would like to have an attribute 'wafer_IDs' that specifies the list of wafers this process has been performed with. So for a single post I would like to have a list like this:
> 
> wafer_IDs = numeric value, numeric value, numeric value, extendable
> 
> Note: I am not referring here to the option. The numeric values are freely chooses numbers, the only this that varies from post to post is the number of numeric values put.
> 
> Let me make an example (If the attribute were a string this would be the equivalent):
> 
> 1st post: A process that was run with 3 wafers (ID: 1000, ID: 1001 and ID: 1002):
> wafer IDs = 1000, 1001, 1002
> 
> 2nd post: A process that is run with 2 wafers (ID: 1000 and ID: 1002):
> wafer IDs = 1000, 1002
> 
> The string solves the issue, but is not as nice as having directly a list of integers.
> 
> Thanks for your help!
> 
> Best,
> 
> Nick